Home Styles 5168-30 User manual

88 5168 30C
Round Table
(Black & Cottage Oak)
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
PART LIST
HARDWARE LIST
A.
Table Top
1 pc.
B.
Connector Panel
1 pc.
C.
Post
1 pc.
D.
Leg
4 pcs.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Key Wrench
1 pc.
Hex Wrench
1 pc.
Floor Leveler
4 pcs. (+1 extra)
Flat
Washer
16 pcs. (+ 1 extra)
Spring
Washer
16 pcs. (+1 extra)
Nut
12 pcs. (+1 extra)
Head Cap Bolt
4 pcs. (+1 extra)
Small
Hex Wrench
1 pc.

Assembly Instructions
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench and Key Wrench in a safe place as you may
need to tighten up the Head Cap Bolts in the future.
STEP 1
STEP 2
STEP 3
Attach Connect Panel (B) to
Post (C), using Flat Washers,
Spring Washers and Nuts.
Turn the unit upside down on the soft cloth.
Attach Table Leg (D) to the unit, using Flat
Washers, Spring Washers and Nuts.
Insert floor levers into the pre-drilled holes
of Leg (D).
Place the Base Unit in step 2 on to Table Top (A)
with Flat Washers, Spring Washers and Head Cap Bolts.
Turn the assembled unit to it’s upright position.
A