Home Styles Bedford 88 5531 10N User manual

Part List
K.
Back Panel
2 pcs.
I.
Base
1 pc.
R.
Back Support
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
Casual Attire For Today's Home
88 5531 10N
Entertainment Credenza
Bedford
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Hardware List
Cam Lock
28 pcs.(+1 extra)
Cam Lock Screw
28 pcs.(+1 extra)
Adjustable Pin
20 pcs.(+1 extra)
Pull Handle
4 pcs.
Machine Screw
4 pcs.
Wood Screw
for Magnet
8 pcs.(+1 extra)
Magnet
4 pcs.
H.
Plinth
1 pc.
J.
Back Panel
1 pc.
Wood Screw
for Back Panel
12 pcs.(+1 extra)
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
D.
Middle Panel
.1 pc
E.
Middle Panel
.1 pc
F.
Fixed Shelf
1 pc.
G.
Back Panel
1 pc.
L.
Shelf
1 pc.
M.
Shelf
4 pcs.
N.
Door
1 pc.
O.
Door
1 pc.
P.
Door
1 pc.
Q.
Door
1 pc.
S.
Leg
1 pc.

D
E
Cam Lock Screw
Cam Lock
Magnet
G
F
STEP 3
Attach 2X Magnets to Fixed Shelf (F)
by using Wood Screws in the pre-drilled holes.
Attach Fixed Shelf (F) to Middle Panel (D) with Cam Locks (See figure 2),
to the unit with Cam Locks.
then slide
Back Panel (G) into position.
Attach Middle Panel (E)
(Figure 2)
STEP 1
STEP 2
Assembly Instructions 2/4
A
Cam Lock Screw
Wood Screw
Insert Cam Lock Screws into
the pre-drilled holes of Top (A).
Insert Cam Lock Screws
into the pre-drilled holes
of
Base (I).
Side Panel (B) and (C),
Middle Panel (D) and (E),
Plinth (H) and
Magnet
Attach 2X Magnets to
Top (A) by using Wood Screws
in the pre-drilled holes
(See figure 1).
(Figure 1)
B
C
D
E
H
I

STEP 4
Assembly Instructions 3/4
Cam Lock Screws
Attach Base (I) to the unit with Cam Locks.
Put 3X Cam Lock Screws into the pre-drelled holes of Base (I) as shown, then attach
Back Support (R) to Base (I) with Cam Locks and attach Side Panel (B) and (C), Plinth (H)
to the unit with Cam Locks.
Tighten up Leg (S) in the pre-drilled hole of unit as shown.
I
B
R
S
HC
Cam Lock
A
Adjustable Pin
Cam Lock
STEP 5
Slide Back Panels
(J) and (K) into place.
Place Top (A) onto
the unit, using
Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level. (See figure 3)
Place Shelves (L) and (M) into position.
L
J
K
M
M
M
M
K
(Figure 3)

O
P
Q
Attach Doors (N), (O), (P) and (Q) by sliding
the door lift hinges into the side panels lift hinges. (See figure 4)
Assemble Pull Handles to Doors with Machine Screws. (See figure 5)
STEP 6
Assembly Instructions 4/4
N
(Figure 5)
(Figure 4)
STEP 7
(Figure 6)
Insert 12X Wood Screws from the back of the unit,
tighten up all the Wood Screws. (See figure 6)
Note: Please make sure unit is level before tightening these screws.