Home Styles Cabin Creek Baker's Rack User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Head Cap Bolt
28 pcs. (+1 extra) Head Cap Bolt (long) 2 pcs. (+1 extra)
Head Cap Bolt
(for connecter)
4 pcs. (+1 extra)
Spring Washer
30 pcs. (+1 extra) Flat Washer 30 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
Hex Wrench
1 pc. Wood Screw (long)
8 Pcs. (+1 extra) Wood Screw (short)
4 Pcs. (+1 extra) Steel Plate Connecter
2 Pcs. (+1 extra)
88 5411 65
Cabin Creek
Baker’s Rack
A.
Top
1 Pc.
F.
Rail
1 Pc.
G.
Shelf
2 Pcs.
B.
Side Frame
1 Pc.
C.
Side Frame
1 Pc.
D.
Back Frame
1 Pc.
E.
Back Frame
1 Pc.
Tools required for assembly : Phillips screwdriver

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
B
G
B
G
B
E
B
F
B
C
/3
Head Cap Bolt
Spring Washer
Flat Washer
STEP 1
Attach Rails (F) and Back Frame (E) to Side Frame (C)
with Head Cap Bolts, Spring Washers and Flat Washers.
(see Figure 1)
Attach Back Frame (D) to unit with Head Cap Bolts,
Spring Washers and Flat Washers.
STEP 2
Attach Shelves (G) to unit
with Head Cap Bolts, Spring Washers and Flat Washers.
Figure 1
B
D

Assembly Instructions 3
STEP 4
Pleace Top (A) upside down on a soft cloth.
Attach unit from Step 1 to Top (A) with
Head Cap Bolts (long), Spring Washers,
Flat Washers and Wood Screws (long).
STEP 5
Pleace the unit onto the Buffet.
Attach Steel Plate Connecters to unit
with Head Cap Bolts (for connecter)
and Wood Screws (short).
STEP 3
Attach Side Frame (B) with
Head Cap Bolts, Spring Washers
and Flat Washers.
/3
B
B
Wood Screw
(long)
Head Cap Bolt (long)
Head Cap Bolt
(for connecter)
Wood Screw
(short)