Home Styles Nantucket Buffet 88 5022 611 User manual

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
A .
Top
1 pc.
C.
Front Rail
1 pc.
For assembly see instructions in carton : 88 5022 612
88 5022 611
Nantucket
Buffet
D.
Front Rail
1 pc.
F.
Back Rail
1 pc.
H.
Door
1 pc.
I.
Door
1 pc.
J.
Back Post
1 pc.
K.
Back Post
1 pc.
L.
Back Panel
3 pcs.
G.
Shelf
2 pcs.
B.
Bottom
1 pc.
E.
Back Rail
1 pc.

Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hardware List
Part List
N .
Side Panel
1 pc.
M.
Side Panel
1 pc.
O.
Middle Panel
1 pc.
T.
Drawer
2 pcs.
Adjustable Pin
8 pcs. (+1 extra)
Key Wrench
1 pc.
Small
Key Wrench
1 pc.
Pull Handle
2 pcs.
Cam Lock
24 pcs. (+2 extra)
Wood Screw
(long)
16 pcs. (+1 extra) Machine Screw
6 pcs.
Cam Lock Screw
24 pcs. (+2 extra)
d
S
Wood Screw
(short)
20 pcs. (+2 extra)
Knob
2 pcs.
Also need Parts in carton : 88 5022 611
88 5022 612
Nantucket
Buffet
(Knock-Down Construction, please refer to the
last page of instruction in carton 88 5022 612
for steps to complete assembly)
.
T.
Drawer
P.
Middle Panel
1 pc.
Q.
Divider
1 pc.
R.
Shelf
1 pc.
S.
Wine Rack
4 pcs.

IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Use a soft cloth between these parts and the floor.
*After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Assembly Instruction 2 / 6
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Top (A), Bottom (B), Side Panel (M), (N), and
Middle Panel (O) and (P). (see Figure 1)
Figure 1
STEP 2
Attach Middle Panel (O) and (P) to
Shelf (R) using Cam Locks. (see Fig-
ure 2)
Attach Back Post (J) to Middle Panel
(O) and Back Post (K) to Middle Panel
(P).
Attach Back Rail (F) to the unit.
Attach Side Panel (M) to unit with
Cam Lock.
Cam Lock Screw
Figure 2
J
J
A
A
Cam Lock
B
B
N
N
O
O
P
P
M
M
K
K
P
P
O
O
R
R
F
F
M
M
Cam Lock Screw

C
C
Cam Lock
Assembly Instruction 3 / 6
STEP 3
Slide Back Panels (L) into the groove in Side
Panel (M), Back Rail (M) and Back Posts (J)
and (K).
Attach Back Rail (E) to unit with Cam Lock.
STEP 4
Attach Front Rail (C)
to unit using Cam
Lock.
Attach Divider (Q) to
unit.
Attach Front Rail (D)
to unit using Cam
Lock.
Attach Side Panel
(N) to unit using Cam
Locks.
L
L
L
L
M
M
N
N
D
D
Cam Lock
Q
Q
Cam Lock
J
J
K
K
E
E
L
L

STEP 5
Attach unit to Bottom (B) with Cam
Locks.
Assembly Instruction 4 / 6
STEP 6
Slide Wine Racks (S) into
Wine Racks (S).
S
S
Cam Lock
B
B
S
S
S
S
S
S

Wood Screw
STEP 8
To level the unit, adjust the adjustable levelers on
the bottom of unit. (see Figure 5)
Insert 12X Wood Screws (short) from the back of
the unit. (see Figure 6)
Note: Please make sure unit is level before
tightening these screws.
Assembly Instruction 5 / 6
Figure 3 Figure 4
STEP 7
Place Top (A) onto the unit and
attach with Cam Locks.
Slide Drawers (T) and wine rack
unit into position.
Insert Adjustable Pins into side
panels at the desired level.
Place Shelves (G) into position.
Attach Doors (H) and (I) to side
panels by sliding the door lift
hinges into the side panel lift
hinges. (see Figure 3)
Assemble Knobs to Door (H) and
(I) with Machine Screws.
(see Figure 4)
Figure 5 Figure 6
T
T
T
T
A
A
G
G
G
G
H
H
I
I
Adjustable Pin
Cam Lock

Assembly Instruction 6 / 6
STEP 1
Attach T1 to T3 and T4,
using a Phillips screwdriver and
long wood screws (4X), tighten
halfway.
Attach T2 to T3 and T4 using
long wood screws (4X), tighten
halfway. (see Figure 1)
STEP 3
Insert short wood screws (4X)
into the pre-drilled holes in T5
and tighten. (see Figure 3)
STEP 4
Assemble Pull Handle with machine screws.
(see Figure 4)
Tighten all screws used in drawer assembly
Figure 3
Part List
T5.
Base Part
2 Pcs.
T1.
Front Part
2 Pcs.
T2.
Back Part
2 Pcs.
T3.
Side Part
2 Pcs.
T4.
Side Part
2 Pcs.
Drawer (T)
MAKE SURE ROLLER
IS ON THE BACK
Figure 4
STEP 2
Slide T5 into the grooves in T3
and T4. Be sure to push T5 all
the way forward so it meets T1.
(see Figure 2)
Figure 2
Figure 1
T5
T5
T1
T1
T4
T4
T3
T3
T3
T3
T4
T4
T1
T1
T2
T2
T2
T2
T5
T5
T1
T1
T4
T4
T3
T3
T2
T2
T
1
.
T3
T4
T2
d
so
it
meets
T1
.