Home Styles Concrete Chie 88 5134 30 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Tools required for assembly : Phillips screwdriver
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
Head Cap Bolt
8 Pcs. (+1 extra)
Wood Screw
5 Pcs. (+1 extra)
Spring Washer
8 Pcs. (+1 extra)
Flat Washer
8 Pcs. (+1 extra)
88 5134 30
Concrete Chie
Dining Table
A.
Table Top
1 Pc.
C.
Stretcher
1 Pc.
D.
Stretcher
1 Pc.
B.
Leg
4 Pcs.
Tools recommended for assembly : Level

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 2
Attach Stretchers (C) and (D)
to unit with Wood Screws. (see Figure 2)
Tighten all Head Cap Bolts.
STEP 3
Turn the table over its’
upright position.
To the level the table,
adjust the adjustable levelers
on the bottom of the legs.
(see Figure 3)
B
D
B
A
B
B
B
B
B
B
B
B
B
C
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
STEP 1
Place Table Top (A) upside down on a
soft cloth.
Attach Legs (B) to Table Top (A) with
Head Cap Bolts, Spring Washers
and Flat Washers.
Tighten Head Cap Bolts only half way.
(see Figure 1)
Figure 1
Figure 2 Figure 3
/2