Home Styles Arm Chair User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Spring Washer (large)
10 pcs. (+1 extra)
Flat Washer (large)
10 pcs. (+1 extra)
Wrench (large)
1 pc.
Nut (large)
10 pcs. (+1 extra)
Nut Cap (large)
10 pcs. (+1 extra)
B.
Seat
1 pc.
C.
Arm
1 pc.
D.
Arm
1 pc.
Wrench (small)
1 pc.
Spring Washer (small)
4 pcs. (+1 extra)
Flat Washer (small)
4 pcs. (+1 extra)
Nut (small)
4 pcs. (+1 extra)
Nut Cap (small)
4 pcs. (+1 extra)
M6x30
Tapered Bolt (long)
2 pcs. (+1 extra)
M6x25
Tapered Bolt (short)
2 pcs. (+1 extra)
Tool(s) required for assembly: Philips screwdriver
20 05560 0080
Arm Chair
IMPORTANT
A.
Back
1 pc.
E.
Leg
4 pcs.
Carefully remove all the parts from the carton and place them
individually on a soft cloth to prevent scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
This product is made of aluminum. Do not use power tools
above 8 volts to assemble and only tighten bolts until snug.
Over tightening can damage the aluminum.

Tapered Bolt
(long)
Tapered Bolt (short)
Flat Washer (large)
Spring Washer (large)
Nut (large)
Nut Cap (large)
Nut Cap (small)
Nut (small)
Spring Washer (small)
Flat Washer (small)
STEP 2
Turn unit over to its upright position.
Attach Back (A) to unit with
Flat Washers (large), Spring Washers (large)
and Nuts (large), tightening nuts only halfway.
Attach Arms (C) and (D) to unit with
Tapered Bolts (short), Tapered Bolts (long),
Flat Washers (small), Spring Washers (small)
and Nuts (small), tightening bolts and
nuts only halfway.
Tighten all Bolts and Nuts used in Steps 1 and 2.
Cover all Nuts with Nut Caps (small)
and Nut Caps (large).
Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Wrench as the bolts and nuts may need to be tightened in the future.
A
CD
STEP 1
Place Seat (B) upside down on a soft cloth.
Attach Legs (E) to Seat (B) with Flat Washers
(large), Spring Washers (large) and Nuts (large),
tightening nuts only halfway.
(See Figure 1)
Figure 1 B
E
E
E
E
Nut Cap (large)
Nut (large)
Spring Washer (large)
Flat Washer (large)

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319