Home Styles 88 5555 33 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5555 33
Biscayne Metal 42"x72" Oval Dining Table
Key Wrench
1 pc.
Bolt
8 pcs.(+1 extra)
Flat
Washer
16 pcs.(+1 extra)
Spring
Washer
16 pcs.(+1 extra)
Nut
16 pcs.(+1 extra)
Nut Cap
16 pcs.(+1 extra)
A.
Top
1 pc.
B.
Leg
4 pcs.
C.
Stretcher
1 pc.
Tools required for assembly : Slotted screwdriver Tools recommended for assembly : Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
Revised 17Mar2011[email protected]
Part List
Hardware List

Assembly Instructions
STEP 1
STEP 2
STEP 3
Figure 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Turn the table to its’ upright position.
To level the table, adjust the adjustable
levelers on the bottom of legs.
(See figure 2)
Figure 2
B
B
BB
C
Attach Legs (B) to Stretcher (C)
with Flat Washers, Spring Washers,
Nuts and Nut Caps.
Nut Cap
Nut
Flat Washer
Spring Washer
A
Place Top (A)
upside down on a soft cloth.
Insert all Bolts into the pre-drilled holes
of Top (A). (See figure 1)
Attach unit from Step 1 to Top (A)
with Flat Washers, Spring Washers,
Nuts and Nut Caps.
Nut Cap
Nut
Flat Washer
Spring Washer
Bolt