Home Styles Naples Corner Entertainment User manual

88 5530 07
Naples
Corner Entertainment
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly : Phillips screwdriver
Hardware List
A.
Top
1 pc.
K.
Plinth
1 pc.
Cam Lock
31 pcs.(+6 extra)
Cam Lock Screw
31 pcs.(+2 extra)
Adjustable Pin
24 pcs.(+1 extra)
Pull Handle
2 pcs.
Machine Screw
2 pcs.
L.
Shelf
2 pcs.
M.
Shelf
4 pcs.
N.
Door
1 pc.
O.
Door
1 pc.
F.
Base
.1 pc
G.
Back Panel
.1 pc
I.
Back Panel
.1 pc
H.
Back Panel
.1 pc
J.
Back Panel
.1 pc
B.
Side Panel
.1 pc
D1.
Middle Panel
.1 pc
D2.
Middle Panel
.1 pc
C.
Side Panel
1 pc.
E.
Front Rail
1 pc.
Flat Washer
for Wood Screw
13 pcs. (+1 extra )
Wood Screw
for Base and
Back Panel
13 pcs.(+1 extra)
Hex Wrench
1 pc.
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

IMPORTANT
Do not tighten screws until each part is properly assembled.
STEP 1
Assembly Instructions 2/4
A
Cam Lock Screw
BC
Insert Cam Lock Screws into the pre-drilled holes
of Top (A), Side Panel (B) and (C),
Back Panel (I) and (J),
Plinth (K), then tighten.
K
J
I

K
E
I
B
C
J
Figure 1
STEP 3
Attach Plinth (K) to Base (F) with Cam Locks.
Attach Back Panels (I) and (J) to unit with Cam Locks.
Attach Side Panels (B), Front Rail (E) and Side Panel (C)
to unit with Cam Locks. (see Figure 1)
Assembly Instructions 3/4
D1
D2
F
Flat Washer
Wood Screw
Attach Middle Panels (D1) and (D2)
to Base (F) using Flat Washers
and Wood Screws.
STEP 2
F

Flat Washer
Wood Screw
G
H
A
Assemble Pull Handles to Door (N) and (O) with Machine Screws. (see Figure 3)
Attach Door (N) and (O) to the side panels, by sliding the door lift hinges into the side panels
lift hinges. (see Figure 4)
Attach Back Panel (G) and (H)
to the unit with Flat Washers
and Wood Screws.
Figure 4
STEP 5
O
N
M
M
M
L
LM
Figure 2
Figure 3
Adjustable Pin
Place Top (A) onto unit
with Cam Locks.
Insert Adjustable Pins into side panels and middle panels at the desired level
(see Figure 2), then place Shelves (L) and (M) into position.
Assembly Instructions 4/4
STEP 4
Adjustable
Pin