Home Styles 88 500 941 Series User manual

88 500x941
Kitchen Island Combo
(White Finish)
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly : Phillips screwdriver
A.
Top Unit
1 pc.
For assembly see instructions in carton 88 5002 943
Part List

Hardware List
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hex Wrench
1 pc.
Head Cap Bolt
18 pcs. (+1 extra)
Cam Lock
4 pcs.(+1 extra)
Cam Lock Screw
4 pcs.(+1 extra)
Machine Screw
4 pcs.
Drawer
Pull Handle
4 pcs.
Small
Hex Wrench
1 pc.
Casual Attire For Today's Home
C.
Back Stretcher
2 pcs.
D.
Back Stretcher
1 pc.
E.
Middle Panel
1 pc.
F.
Rail
2 pcs.
G.
Shelf
4 pcs.
H.
Base
1 pc.
Adjustable Pin
32 pcs. (+1 extra)
88 500x942
Kitchen Island Combo
(White Finish)
B.
Top
1 pc.
N.
Back Panel
2 pcs.
For assembly see instructions in carton 88 5002 943
Part List (in this carton)

Part List (in this carton)
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed. Casual Attire For Today's Home
I.
Leg
1 pc.
J.
Leg
1 pc.
K.
Leg
1 pc.
L.
Leg
1 pc.
M.
Side Panel
2 pcs.
O.
Shelf
4 pcs.
P.
Door
1 pc.
Q.
Door
1 pc.
88 500x943
Kitchen Island Combo
(White Finish)
Tools Required For Assembly : Phillips screwdriver
Also need the following from carton 88 5002 941, 88 5002 942
Part List in carton 88 5002 941
Top Unit (A) 1 pc.
1 pc.
2 pcs.
1 pc.
1 pc.
2 pcs.
4 pcs.
1 pc.
2 pcs.
Part List in carton 88 5002 942
Top (B)
Back Stretcher (C)
Back Stretcher (D)
Middle Panel (E)
Rail (F)
Shelf (G)
Base (H)
Back Panel (N)
Hardware List in carton 88 5002 942
Hex Wrench
Small
Cam Lock
Cam Lock Screw
Hex Wrench
Head Cap Bolt
Adjustable Pin
Machine Screw
Drawer Pull Handle
1 pc.
1 pc.
5 pcs.
5 pcs.
19 pcs.
33 pcs.
4 pcs.
4 pcs.

IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in the safe place as you may need to tighten up the Head Cap Bolts in the future.
Assembly Instructions 2/4
STEP 1
Put Cam Lock Screws into the pre-drilled holes of Leg (K),(L) and tighten.
Cam Lock Screw
K
L
Attach Back Stretcher (C) to Leg (K) using Cam Locks.
Attach Back Stretcher (D) to Back Stretcher (C).
Slide Back Panel (N) to unit, then attach Back Stretcher (C) to unit using Cam Locks.
Attach Leg (L) to the unit using Cam Locks.
STEP 2
K
L
N
N
C
D
C
Cam Lock

Assembly Instructions 3/4
STEP 3
EH
Attach unit from Step 2 and Middle Panel (E) to Base (H) with Head Cap Bolts.
STEP 4
Attach Leg (I) and (J) to Base (H) with Head Cap Bolts.
Slide Side Panels (M) into position.
J
I
M
M
Head Cap Bolt
Head Cap Bolt
H

Assembly Instructions 4/4
STEP 5
Attach Rail (F) to unit
with Head Cap Bolts.
Insert Adjustable Pins
Into both side panels and
Middle Panels at the desired level.
Slide Shelf (G) into place.
Assemble Pull Handle
to Door (P) and (Q) with
Machine Screws. (see Figure 1)
Attach Door (P) and (Q) to
the side panels
by sliding the door lift hinges into
the side panel lift hinges.
(see Figure 2)
(Figure 1) (Figure 2)
Remove the drawers in
Top Unit (A) and assemble
Pull Handle with Machine Screws.
Slide the Drawers into position.
Insert Adjustable Pins
Into both side panels at
the desired level.
Place Top (A) on the unit with
Head Cap Bolts.
Slide Shelf (O) into Place.
STEP 6
A
O
OO
O
G
G
GG
FF
PQ
Head Cap Bolt
Head Cap Bolt
Pull Handle
Machine Screw
Head Cap Bolt
Adjustable Pin