Home Styles 88 5050 76 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Tools required for assembly : Phillips screwdriver
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
Head Cap Bolt
18 Pcs. (+1 extra)
Tapered
Head Cap Bolt
20 Pcs. (+1 extra)
Wood Screw (long)
24 Pcs. (+1 extra)
Wood Screw (short)
8 Pcs. (+1 extra)
Spring Washer
18 Pcs. (+1 extra)
Flat Washer
18 Pcs. (+1 extra)
88 5050 76
Modern Craftsman
Multi Function Shelf
L.
Lower
Back Frame
2 Pcs.
K.
Upper
Back Frame
2 Pcs.
A.
Top
1 Pc.
F.
Front Frame
1 Pc.
G.
Front Rail
4 Pcs.
H.
Back Stretcher
1 Pc.
I.
Back Stretcher
2 Pcs.
J.
Shelf
4 Pcs.
Tools recommended for assembly : Level
B.
Side Frame
1 Pc.
D.
Side Frame
1 Pc.
C.
Side Frame
1 Pc.
E.
Side Frame
1 Pc.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the screws until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
STEP 2
Attach Front Rails (G)
and Back Strechers (I)
to Side Frame (D)
with Head Cap Bolts,
Spring Washers and
Flat Washers.
Attach Lower Back Frames (L) and
Side Frame (E) to unit with Tapered Head Cap Bolts,
Head Cap Bolts, Spring Washers and Flat Washers.
B
F
B
E
B
D
B
H
B
G
B
KB
K
B
LB
L
B
B
B
C
B
I
B
I
B
G
B
G
B
G
Tapered
Head Cap Bolt
Tapered
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt
Tapered
Head Cap Bolt
STEP 1
Attach Front Frame (F), Front Rail (G)
and Back Stretcher (H) to
Side Frame (B) with
Tapered Head Cap Bolts,
Head Cap Bolts,
Spring Washers
and Flat Washers. (see Figure 1)
Attach Upper Back Frames (K)
and Side Frame (C) to unit with
Tapered Head Cap Bolts.
Figure 1
/4

Assembly Instructions 3
STEP 3
Attach unit from Step 1 to unit from Step2
with Tapered Head Cap Bolts,
Head Cap Bolts, Spring Washers and
Flat Washers.
STEP 4
Place Top (A) onto the unit.
Slide Shelves (J) into position.
B
A
B
J
B
J
B
J
B
J
/4
Tapered
Head Cap Bolt
Flat Washer
Spring Washer
Head Cap Bolt

Assembly Instructions 4
Figure 2
STEP 4
Attach Top (A) to unit with
Wood Screws (short)
Attach Shelves (J)
to unit with
Wood Screws (long).
To the level the unit, adjust
the adjustable levelers on
the bottom of leg.
(See figure 2)
Note: Unit must be level to work properly.
Wood Screws (long)
Wood Screws (short)
/4