Home Styles 500-991 User manual

500 9913-
Bar
IMPORTANT
For assembly see instructions in carton 500 992.3-
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Part List
E.
Glass Holder
1 pc.
A.
To p
1 pc.
I.
Front Panel
1 pc.
H.
Front Panel
2 pcs.
N.
Door
1 pc.
B.
Sub Top
1 pc.
C.
Front Panel
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Cam Lock
39 pcs. (+6 extra)
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Adjustable Pin
12 pcs. (+1 extra)
Magnet
1 pc.
M3x15
Tapered Wood Screw
12 pcs. (+1 extra)
M6x13
Head Cap Bolt (short)
3 pcs. (+1 extra)
Flat Washer
11 pcs. (+1 extra)
Head Cap Bolt
11 pcs. (+1 extra)
M6x25
Knob
2 pcs.
Machine Screw
2 pcs.
M4x25
Wood Screw (long)
M3x25
8 pcs. (+1 extra)
Side Panel
D.
2 pcs.
J.
Side Panel
1 pc.
K.
Side Panel
1 pc.
L.
Middle Panel
1 pc.
F.
Front Rail
2 pcs.
M.
Base
1 pc.
O.
Shelf
3 pcs.
R.
Drawer
1 pc.
P.
Foot Rest Support
3 pcs.
500 9923-
Bar
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Tool(s) required for assembly: LevelPhillips screwdriver,
Carton 500 991 is also needed for assembly.3-
Cam Lock Screw
39 pcs. (+2 extra)
Refer to later page(s) of these
instructions for drawer assembly.
M3x12
Wood Screw
2 pcs. (+1 extra)
Q.
Foot Rest
1 pc.
Hardware List
Part List
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460

Assembly Instructions 2/8
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into
pre-drilled holes in Top (A),
Sub Top (B), Front Panels (H),
(I), Side Panel (K), Middle Panel (L)
and Base (M), then tighten.
(See Figure 1)
Note: Insert Cam Lock Screws into
Sub Top (B) in the holes exactly
as shown.
Attach Magnet to Middle Panel (L)
with Wood Screws into
pre-drilled holes. (See Figure 2)
Figure 2
Do put Cam Lock Screwsnot
in these holes.
Wood Screw
Magnet
H
A
B
M
H
I
KL
Figure 1
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.

Assembly Instructions 3/8
B
C
D
A
STEP 2
Place Top (A) upside down on
a soft cloth.
Attach Side Panels (D) and
Front Panel (C) to Top (A) with
Cam Locks. (See Figure 3)
Attach Sub Top (B) to unit with
Head Cap Bolts and Flat Washers.
(See Figure )4
H
ISTEP 3
Attach Front Panels (H) to
Front Panel (I) with Cam Locks.
D
H
Figure 4
Figure 3
Cam Lock
Head Cap Bolt
Washer
Cam Lock

Assembly Instructions /48
STEP 4
Attach Side Panels (J) and (K) to
unit from Step 3 with Cam Locks.
Attach Base (M) to unit with
Cam Locks.
STEP 5
Attach Front Rails (F) to unit with
Cam Locks.
Attach Middle Panel (L) to unit with
Cam Locks.
Cam Lock
Cam Lock
F
J
K
M
L
F

Part List
R1.
Drawer Front
1 pc.
R2.
Drawer Back
1 pc.
R3.
Drawer Side
1 pc.
R4.
Drawer Side
1 pc.
R5.
Drawer Bottom
1 pc.
STEP 8
Attach Knob with Machine Screw.
STEP 6
Attach Drawer Front (R1) and Drawer Back (R2)
to Drawer Side (R3) with Wood Screws (long).
STEP 7
Slide Drawer Bottom (R5) into groove.
Attach Drawer Side (R4) to unit
with Wood Screws (long).
R1
R2 R3
R4
R5
Drawer ( )R
Machine Screw
Knob
Roller at back
Wood Screw (long)
Assembly Instructions /58

Assembly Instructions /68
STEP 9
Attach unit from Step 2 to unit with Cam Locks.
Attach Glass Holder (E) to unit with Head Cap Bolts and Flat Washers. (See Figure )5
E
Cam Lock
Washer
Head Cap Bolt
Figure 5

Adjustable Pin
STEP 10
Insert Adjustable Pins into middle panel and
side panels at desired level. (See Figure )6
Place Shelves (O) into position.
Attach Door (N) to unit by sliding door hinges
into side panel hinges. (See Figure )7
Attach Knob to Door (N) with Machine Screw.
(See Figure )8
Slide Drawer (R) into position.
Level unit by adjusting the adjustable
levelers on bottom of unit. (See Figure )9
Note: Unit must be level to work properly.
Assembly Instructions /78
O
N
O
O
R
Knob
Machine Screw
Figure 9
Figure 7
Figure 8
Figure 6

Assembly Instructions /88
STEP 11
Slide Foot Rest (Q) into
Foot Rest Supports (P).
(See Figure )10
P
Q
STEP 12
Attach Foot Rest Supports (P) to unit with Tapered Wood Screws into pre-drilled holes.
(See Figure 11)
Attach Foot Rest (Q) to Foot Rest Supports (P) with Head Cap Bolts (short), leaving
same amount of Foot Rest (Q) protruding on outside of outer Foot Rest Supports (P).
(See Figure 12)
P
P
P
P
P
Same amount of Foot Rest (Q) on each side
Head Cap Bolt (short)
Tepered Wood Screw
Figure 11
Figure 12
Figure 10
Q

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
homestyles will provide replacements free of charge for missing or damaged parts within 30 days of purchase.
Digital images of the defective parts may be required. If the product was not purchased from an authorized retailer,
homestyles is under no obligation to provide replacement parts. Parts are not available for fully assembled items nor
are parts available for sale. Replacements for missing or damaged parts may be requested via contact info below.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460