Home Styles 88 5552 32 User manual

Key Wrench
1 pc.
Bolt
8 pcs.(+1 extra)
Flat
Washer
16 pcs.(+1 extra)
Spring
Washer
16 pcs.(+1 extra)
Nut
16 pcs.(+1 extra)
Nut Cap
16 pcs.(+1 extra)
A.
Top
1 pc.
B.
Leg
4 pcs.
C.
Stretcher
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5552 32
42” Round Dining Table
Tools required for assembly : Tools recommended for assembly :Slotted screwdriver Level
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected] Revised 17Mar2011
Part List
Hardware List

Assembly Instructions
STEP 1
STEP 2
STEP 3
STEP 4
Figure 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Place Top (A)
upside down on a soft cloth.
Insert all Bolts into
the pre-drilled holes of Top (A).
Attach 2 adjacent Legs
(B) to Top (A) with Bolts, Flat Washers,
Spring Washers, and Nuts.
(See figure 1)
Tighten all Nuts, only ,half way
with Key Wrench.
Attach Stretcher (C) to unit with
Flat Washers, Spring Washers
and Nuts, tighten .half way
Attach 2X Legs (B) to unit with Flat Washers,
Spring Washers and Nuts.
Tighten all Nuts completely with Key Wrench.
Cover all Nuts with Nut Caps.
Turn the table to its’ upright position.
To level the table, adjust the adjustable
levelers on the bottom of legs.
(See figure 2)
B
B
B
B
C
A
Flat Washer
Spring Washer
Nut
Nut Cap
Nut Cap
Nut
Spring Washer
Flat Washer
Bolt
Figure 2