Home Styles 88 5519 302 User manual

Hardware List
Part List
Tool(s) required for assembly: Level
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Carton 88 5519 301 is also needed for assembly.
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
B.
Connector Panel
1 pc.
D.
Leg
4 pcs.
A.
Table Top
1 pc.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M6x40
Head Cap Bolt
4 pcs. (+1 extra)
Nut
12 pcs. (+1 extra)
Key Wrench
1 pc.
Spring Washer (large)
12 pcs. (+1 extra)
Flat Washer (large)
12 pcs. (+1 extra)
Spring Washer (small)
4 pcs. (+1 extra)
Flat Washer (small)
4 pcs. (+1 extra)
88 5519 302
Dining Table

Assembly Instructions 2/2
STEP 2
Place the unit upside down on a soft cloth.
Attach Legs (D) to unit with Flat Washers (large),
Spring Washers (large) and Nuts.
STEP 1
Attach Connect Panel (B) to
Post (C) with Flat Washers (large),
Spring Washers (large) and Nuts.
Spring Washer (small)
Flat Washer (small)
STEP 3
Attach unit to Table Top (A) with Flat Washers (small),
Spring Washers (small) and Head Cap Bolts.
Turn the unit over to its’ upright position.
Level unit by adjusting the adjustable levelers on the bottom of unit. (See Figure 1)
B
C
Spring Washer (large)
Key Wrench
Nut
Flat Washer (large)
D
DD
D
Spring Washer (large)
Key Wrench
Nut
Flat Washer (large)
Figure 1
A
Key Wrench
Head Cap Bolt
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319