Home Styles Hall Tree Stand 88 5530 49 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
88 5530 49
Hall Tree Stand
IMPORTANT
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
M6x28
Head Cap Bolt (long)
8 pcs. (+1 extra)
Spring Support
2 pcs.
M6x25
Head Cap Bolt (short)
6 pcs. (+1 extra)
Dowel
2 pcs. (+1 extra)
M3x16
Wood Screw
for Spring Support,
Base and Back Panel
34 pcs. (+1 extra)
M3x16
Wood Screw
for Hook
8 pcs. (+1 extra)
M5x32
Wood Screw
For Arm
4 pcs. (+1 extra)
Cam Lock Screw
24 pcs. (+1 extra)
Cam Lock
24 pcs. (+6 extra)
Hook
4 pcs.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
S.
Side Panel
1 pc.
T.
Side Panel
1 pc.
D.
Front Panel
1 pc.
U.
Back Rail
1 pc.
V.
Back Rail
1 pc.
W.
Back Panel
2 pcs.
L.
Back Rail
1 pc.
M.
Back Panel
2 pcs.
X.
Back Panel
1 pc.
A.
Seat
1 pc.
P.
Arm
1 pc.
Q.
Arm
1 pc.
R.
Divider
1 pc.
N.
Front Rail
1 pc.
J.
Shelf
1 pc.
I.
Base
1 pc.
O.
Back Rail
2 pcs.
K.
Top
1 pc.
E.
Plinth
1 pc.

Assembly Instructions 2/8
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
D
E
Figure 2
Figure 1
B
C
S
T
Cam Lock Screw
Cam Lock Screw
STEP 1
Insert Cam Lock Screws into
pre-drilled holes of Side Panels
(B), (C), (S), (T) and Top (K),
then tighten. (See Figure 1)
STEP 2
Attach Front Panel (D) to Plinth (E)
with Head Cap Bolts (short).
(See Figure 2)
K
Cam Lock Screw
Head Cap Bolt (short)

Assembly Instructions 3/8
STEP 3
Attach Front Panel (D) and
Back Panel (X) to Side Panel (B)
with Cam Locks and
Head Cap Bolt (short).
(See Figure 3)
Figure 3
Figure 4 STEP 5
Insert Base (I) into unit, then attach with
Wood Screws for Base. (See Figure 4)
STEP 4
Attach Side Panel (C) to unit with
Cam Locks and Head Cap Bolt (short).
Head Cap Bolt (short)
Cam Lock
Cam Lock
Head Cap Bolt (short)
Wood Screw for Base
X
D
B
C
I

Assembly Instructions 4/8
STEP 6
Attach Spring Supports to Seat (A)
by inserting Wood Screws for
Spring Support into pre-drilled holes,
then tighten. (See Figure 5)
A
Spring Support
Wood Screw for
Spring Support
Head Cap Bolt (long)
Figure 5
STEP 7
Attach Seat (A) to unit
with Head Cap Bolts.
A

Assembly Instructions 5/8
STEP 9
Attach Back Rail (U) to Side Panel (S) with Cam Lock.
Slide Back Panels (M) and (W) into position.
S
U
W
M
V
L
O
O
Cam Lock
Cam Lock
Figure 6
STEP 8
Attach Hooks to Back Rail (U) with Wood Screws for Hook.
(See Figure 6)
Hook
Wood Screws for Hook
U
STEP 10
Attach Back Rails (L) and (V) to unit.
Attach Back Rails (O) to unit with
Cam Locks.