Home Styles 88 5080 941 User manual

Tools recommended for assembly : Level
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
IMPORTANT NOTE.
Tools required for assembly : Phillips screwdriver
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
A.
Top
1 pc.
F.
Foot
4 pcs.
Hex Wrench
1 pc.
M6x35
Head Cap Bolt
16 pcs. (+1 extra)
Cam Lock
4 pcs.(+2 extra)
Cam Lock Screw
4 pcs.(+1 extra)
M4x25
Machine Screw
8 pcs.
Adjustable Pin
4 pcs. (+2 extra)
Small
Hex Wrench
1 pc.
M6x50
Head Cap Bolt (long)
4 pcs. (+1 extra)
Spring Washer
4 pcs.(+1 extra)
Flat Washer
4 pcs.(+1 extra) Pull Handle
8 pcs.
88 5080 941
Kitchen Island
For assembly see instructions in carton 88 5080 942

88 5080 942
Kitchen Island
Tools recommended for assembly : Level
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Part List
IMPORTANT NOTE.
Tools required for assembly : Phillips screwdriver
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
B.
Rail
2 pcs.
C.
Side Panel
2 pcs.
D.
Leg
2 pcs.
E.
Leg
2 pcs.
G1.
Shelf
2 pcs.
H.
Door
2 pcs.
I.
Door
2 pcs.
J.
Shelf
1 pc.
K.
Base
1 pc.
G2.
Shelf
2 pcs.
L.
Stretcher
2 pcs.
Part List in carton 88 5080 941
Top (A)
Foot (F)
1 pc.
4 pcs.
Hardware List in carton 88 5080 941
Hex Wrench
Small Hex Wrench
Cam Lock Screw
Cam Lock
Head Cap Bolt
Head Cap Bolt (long)
Spring Washer
Flat Washer
Adjustable Pin
Pull Handle
Machine Screw
1 pc.
1 pc.
5 pcs.
6 pcs.
17 pcs.
5 pcs.
5 pcs.
5 pcs.
6 pcs.
8 pcs.
8 pcs.
For assembly also need carton 88 5080 941

STEP 1
Cam Lock Screw
C
STEP 2
Insert Cam Lock Screws into
the pre-drilled holes of
Side Panels (C) and tighten.
(See Figure 1)
Assemble Side Panel (C) and
Rail (B) using Cam Lock.
(See Figure 2)
Place the unit onto Top (A).
Figure 2
Figure 1
A
CC
B
B
A
Cam Lock
Remove the Drawer from Top (A).
Assembly Instructions 2/5
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.

K
Attach Rail (L) to Leg (D) and (E) with
Head Cap Bolts. (See Figure 3)
Attach Shelf (G1) and (G2) to unit
at the pre-drilled holes of side panels, then.
attach the assembled legs to unit with
Head Cap Bolts.
STEP 3
Attach Base (K) to unit with
Head Cap Bolts.
STEP 4
Head Cap Bolt
Figure 3
Assembly Instructions 3/5
D
E
Head Cap Bolt
G2
G1
D
E
G2
G1
Head Cap Bolt
DE
D
E
L
L

Attach Feet (F) to Base (K)
with Flat Washers,
Spring Washers and
Head Cap Bolts. (See Figure 4)
STEP 5
K
F
F
F
F
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer
Figure 4
STEP 6
Attach Doors (H) and (I) by sliding the door lift hinges into the side panel lift hinges. (See Figure 5)
Assemble Pull Handles to Doors (H), (I) and Drawer
with Machine Screws. (See Figure 6)
Slide Drawer into place.
Insert Adjustable Pins into side panels
at the desired level.
Place Shelf (J) into position.
Figure 5
Pull Handle
Machine Screw
H
I
J
Adjustable Pin
Figure 7
To level the unit, adjust the adjustable
levelers on the bottom of unit.
(See Figure 7)
Assembly Instructions 4/5