Home Styles 88 5575 941 User manual

Part List
For assembly see instructions in carton 88 5575 942
Patent 8,584,600 B2
88 5575 941
Kitchen Island
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
A2.
Top
1 pc.
A1.
Top
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.

Part List
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly: screwdriverPhillips
(Knock-Down Construction, please refer to
the last pageof instructions for steps to
complete drawer assembly)
For assembly see instructions in carton 88 5575 941, 88 5575 943, 88 5575 944
Hardware List
Tools recommended for assembly: Level
Patent 8,584,600 B2
88 5575 942
Kitchen Island
C.
Door
1 pc.
B.
Door
1 pc.
D.
Base
1 pc.
H.
Shelf
2 pcs.
F.
Front Rail
2 pcs.
K.
Upright
1 pc.
I.
Back Stretcher
1 pc.
J.
Back Panel
2 pcs.
L.
Door
2 pcs.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Magnet
2 pcs.
Pull Handle
2 pcs.
M4x20
Machine Screw
4 pcs.
Cam Lock Screw
16 pcs.(+1 extra)
Cam Lock
16 pcs.(+4 extra)
M x163.5
Flat Head Wood
Screw
9 pcs. (+1 extra)
Flat Washer
4 pcs. (+1 extra)
M3.5x25
Wood Screw (long)
for Drawer Side Part
16 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
Spring Washer
4 pcs. (+1 extra)
M6x35
Head Cap Bolt
4 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
for Drawer Base Part
24 pcs. (+1 extra)
Knob
2 pcs.
E.
Middle Panel
1 pc.
G.
Back Turning
1 pc.

Assembly Instructions 2/6
STEP 1
Attach Top (A1) to Top (A2) with
Flat Head Wood Screws for Hinge.
(see Figure 1)
Put Cam Lock Screws into
the pre-drilled holes of Top (A1),
Base (D), Middle Panel (E) and
Side Panels (M), (N) and tighten.
(see Figure 2)
Cam Lock Screw
D
A2
A1
Flat Head
Wood Screw
M
N
E
Cam Lock Screw
Figure 2
Figure 1
Cam Lock Screw
Cam Lock Screw
IMPORTANT
* Do not tighten up all screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.

Assembly Instructions 3/6
I
K
D
J
STEP 2
Attach Base (D) to Side Panel (M)
With Flat Washers, Spring Washers
and Head Cap Bolts. (see Figure 3)
Attach Back Panels (J) and
Upright (K) to unit.
Attach Back Stretcher (I) to unit
with Cam Lock. (see Figure 4)
J
E
F
M
N
O
O
STEP 3
Attach (F) and Middle Panel (E) to unit withFront Rail
Cam Locks.
Figure 3 Figure 4
STEP 4
Attach (F) to unit with Cam Lock.Front Rail
Attach Side Panel (N) to unit with Cam Locks,
Flat Washers, Spring Washers and Head Cap Bolts.
Attach Leg Supports (O) to unit.
Spring Washer
Flat Washer
Head Cap Bolt
Cam Lock
Cam Lock
Spring Washer
Flat Washer
Head Cap Bolt
F

Assembly Instructions 4/6
B
G
A
H
STEP 6
Attach Top (A) to unit with
Cam Locks.
Insert Adjustable Pins into side
panels and middle panel at
desired level, then place
shelves (H) into position.
Slide Drawers (L) into position.
Figure 8
Figure 7
L
H
L
Adjustable Pin
Cam Lock
Wood Screw
(short)
Wood Screw
(short)
Magnet
C
STEP 5
To level the unit, adjust the
adjustable levelers on the
bottom of unit. (see Figure 5)
Note: Unit must be level to
work properly.
After unit is level, attach 8x Wood
Screws (short) to unit.
Attach 2x Magnet to front rails
with Wood Screws (short).
(see Figure 6)
Attach Back Turning (G) into the
pre-drilled hole of unit and tighten.
Attach Doors (B) and (C) to the
side panels, by sliding the door lift
hinges into the side panel lift
hinges. (see Figure 7)
Assemble Pull Handles to Doors
(B) and (C) with Machine Screws.
(see Figure 8)
Figure 6
Figure 5

Assembly Instructions 5/6
TOP EXTENSION INSTRUCTIONS
STEP 2
Holding the Leaf Top up, pull out
a back leg from the unit; then pull
out the other back leg.
Note : Unit must be level in order for the back legs to be pulled out.
STEP 7
When Leaf Top is down, it should be oriented vertically.
If it is not vertical and adjustment is desired, turn the
back turning. (see Figure 9)
90
O
STEP 1
Lift up the Leaf Top.
Back Turning
Figure 9

(Figure 3)
STEP 3
Insert wood screws (6X)short
into the pre-drilled holes in L5,
tighten screws. (See Figure 3)
STEP 4
Attach hardware pulls
with machine screws.
(See Figure 4)
STEP 2
Slide L5 into the grooves in L3
and L4. Be sure to push L5 all
the way forward so it meets L1.
(See Figure 2)
Tighten all screws used in drawer assembly.
(Figure 1)
(Figure 2)
MAKE SURE ROLLER
IS ON THE BACK
L2
L3
L4
L5
L1
Drawer L
Part List
(Figure 4)
STEP1
Attach L1 to L3 and L4, using
a andPhillips screwdriver
wood screws (4X),long
tighten halfway.
Attach L2 to L3 and L4 using
wood screws (4X),long
tighten halfway. (See Figure 1)
L3
L4
L1
L2
L1
L3
L4
L5
L2
L1.
Front Part
2 pcs.
L5.
Base Part
2 pcs.
L2.
Back Part
2 pcs.
L3.
Side Part
2 pcs.
L4.
Side Part
2 pcs.
Assembly Instructions 6/6

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
For assembly see instructions in carton 88 5575 942
Patent 8,584,600 B2
88 5575 943
Kitchen Island
O.
Leg Support
2 pcs.
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Part List
M.
Side Panel
1 pc.
N.
Side Panel
1 pc.

Part List
For assembly see instructions in carton 88 5575 942
Patent 8,584,600 B2
88 5575 944
Kitchen Island
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
A2.
Top
1 pc.
A1.
Top
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.