Home Styles 88 5064 80 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5064 80
Chair
IMPORTANT
A.
Seat
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Spring Washer
4 pcs. (+1 extra)
Small
Flat Washer
5 pcs. (+1 extra)
F.
Back Leg
1 pc.
B.
Front Leg
1 pc.
Small
Hex Wrench
1 pc.
M6x16
Head Cap Bolt
4 pcs. (+1 extra)
M6x60
Bolt (long)
2 pcs. (+1 extra)
Nut Cap
5 pcs. (+1 extra)
M6x40
Bolt
2 pcs. (+1 extra)
Hex Wrench
1 pc.
Key Wrench
1 pc.
Flat Washer
4 pcs. (+1 extra)
C.
Top Rail
1 pc.
D.
Side Rail
2 pcs.
E.
Back Rail
2 pcs.
M6x30
Flat Head Bolt
8 pcs. (+1 extra)
M6x13
Bolt (short)
3 pcs. (+1 extra)
Tool(s) required for assembly: Slotted screwdriver, Level

Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench and Key Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Front Leg (B) to Seat (A) with Flat Washers, Spring Washers, Head Cap Bolts and Flat Head
Bolt, tightening the bolts only half way. (See Figures 1 and 2)
Attach Side Rails (D) to unit with Flat Head Bolts, tightening the bolts only half way.
(See Figures 2 and 3)
tightening the bolts only half way.Attach Back Leg (F) to unit with Flat Head Bolts,
Tighten all bolts on this step.
Figure 2
Figure 3
Figure 1
A
D
D
B
F
Spring Washer
Flat Washer
Head Cap Bolt
Flat Head Bolt
Flat Head Bolt

Assembly Instructions 3/3
STEP 2
Orientate Top Rail (C) so the ‘Arrow’ sticker is at back of unit,
then attach Top Rail (C) and a Back Rail (E) to unit with Bolt (long)
Small Flat Washer and Nut Cap. (See Figure 4)
Attach other Back Rail (E) to unit with Bolt (long), Bolt (short),
Small Flat Washers and Nut Caps. (See Figure 5)
C
E
E
Bolt (long)
E
E
Nut Cap
Small
Flat Washer
Bolt (short)
Nut Cap
Small Flat Washer
Bolt
Nut Cap
Small Flat Washer
Bolt (short)
Bolt (short)
STEP 3
Attach Back Rails (E) to back leg and seat
with Bolts, Bolts (short), Small Washers and
Nut Caps, bending Back Rails slightly to align
the holes in the Back Rails to the holes in the
back leg and seat. (See Figures 6 and 7)
Tighten all bolts and nut caps used in Steps 2 and 3.
STEP 4
To level the unit, adjust the adjustable levelers on the bottom of the legs. (See Figure 8)
Note: Unit must be level to work properly.
‘Arrow’ sticker
at back
Figure 4 Figure 5
Bend Back Rail (E)
here.
Figure 6 Figure 7 Figure 8

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319