Home Styles 88 5170 89 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[e-mail], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
88 5170 89
Bar Stool
A.
Seat
1 pc.
B.
Stretcher
1 pc.
D.
Stretcher
1 pc.
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
M8x76
Head Cap Bolt (long)
4 pcs. (+1 extra)
M8x40
Head Cap Bolt (short)
3 pcs. (+1 extra)
M8x50
Head Cap Bolt
4 pcs. (+1 extra)
Flat Washer
11 pcs. (+1 extra)
Spring Washer
11 pcs. (+1 extra)
M3.5x40
Wood Screw
6 pcs. (+1 extra)
C.
Stretcher
1 pc.
F.
Leg
1 pc.
E.
Leg
1 pc.
G.
Back Frame
1 pc.

Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
STEP 1
Attach Seat (A) to Back Frame (G) with
Flat Washers, Spring Washers, Head Cap
Bolts (long) and Head Cap Bolts (short).
(See Figures 1 and 2)
Figure 4
Figure 2
Figure 1
STEP 2
Put end of Stretcher C into hole in()
Back Frame.
Slide Leg (E) into position on the unit with
other end of Stretcher C in hole in Leg (E).()
Attach Leg (E) to unit with Flat Washers,
Spring Washers and Head Cap Bolts.
(See Figure 3)
Attach Stretcher C to unit with Wood Screws.()
(See Figure 4)
Figure 3
Spring Washer
Wood Screw
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
(long)
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer
Head Cap Bolt
(short) Flat Washer
Wood Screw
C
A
F
E
G
D
B
STEP 3
Put end of Stretcher (D) into hole in Back Frame and
end of Stretcher (B) into hole in Leg (F).
Slide Leg (F) into position on the unit with other end of
Stretchers (B) and (D) in holes in Leg (F).
Attach Leg (F) to unit with Flat Washers, Spring Washers
and Head Cap Bolts.
Attach Stretchers (B) and (D) to unit with Wood Screws.
Tighten all Head Cap Bolts and Wood Screws.

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[e-mail], 888-680-7460, 877-831-0319