Home Styles 88 5601 22 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles ConsumerAssistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5601 22
Console Table
Tools required for assembly : Phillips screwdriver Tools recommended for assembly : Level
Hex Wrench
1 Pc.
Small Hex Wrench
1 Pc.
M8x60
Head Cap Bolt (long)
4 Pcs. (+1 extra)
M6x40
Head Cap Bolt (small)
4 Pcs. (+1 extra)
M8x50
Head Cap Bolt (short)
2 Pcs. (+1 extra)
M6x15
Tapered Head Cap Bolt
4 Pcs. (+1 extra)
Connector
4 Pcs.
Flat Washer
4 Pcs. (+1 extra)
Spring Washer
4 Pcs. (+1 extra)
A.
Top
1 Pc.
B.
Leg
2 Pcs.
C.
Frame
1 Pc.
D.
Stretcher
1 Pc.

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the Head Cap Bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
*After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Legs (B) to Frame (C)
and Stretcher (D) with Connector,
Flat Washers, Spring Washers,
Head Cap Bolts (long),
Head Cap Bolts (short) and
Head Cap Bolts (small).
(See Figure 1)
STEP 2
Place Top (A) upside down on a soft cloth.
Attach Top (A) to unit with Tapered Head Cap Bolts and
Head Cap Bolts (small).
Turn the unit over to its’ upright position.
To level the unit, adjust the adjustable levelers on the bottom of
the legs. (See Figure 2)
A
D
B
B
C
Figure 1
Figure 2
/2
Connector
Flat Washer
Spring Washer
Head Cap Bolt (long)
Head Cap Bolt (short)
Head Cap Bolt (small)
Head Cap Bolt (small)
Tapered Head Cap Bolt
Note : Unit must be level to work properly.