Home Styles 88 5523 942 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
IMPORTANT
Cartons 88 5523 941 and 943 are also needed for assembly.
88 5523 942
Kitchen Island
M4x28
Machine Screw
9 pcs.
Cam Lock Screw
28 pcs.(+2 extra)
Cam Lock
28 pcs.(+6 extra)
Flat Washer
8 pcs. (+1 extra)
Adjustable Pin
8 pcs. (+1 extra)
M3.5x16
Wood Screw (short)
for Drawer Bottom
16 pcs. (+1 extra)
Knob
1 pc.
Handle
4 pcs.
M3.5x25
Wood Screw (long)
for Drawer Side
40 pcs. (+1 extra)
C.
Middle Panel
1 pc.
D.
Side Panel
1 pc.
B.
Side Panel
1 pc.
F.
Back Panel
1 pc.
E.
Back Panel
1 pc.
M3x15
Wood Screw
for Magnet
2 pcs. (+1 extra)
Magnet
1 pc.
M6x35
Long Screw
for Base
8 pcs. (+1 extra)
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.

Assembly Instructions 2/6
Cam Lock Screw
Cam Lock Screw
STEP 1
Put Cam Lock Screws into
the pre-drilled holes of Top (A),
Side Panels (B), (D), Middle Panel (C),
Back Panel (E) and Base (I) and tighten.
(See Figure 1)
Cam Lock Screw
Cam Lock Screw
I
A
D
B
CE
Figure 1
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.

Assembly Instructions 3/6
Cam Lock
STEP 3
Attach Front Rails (H) and (G)
to Middle Panel (C).
Attach unit from Step 2 to unit from
Step 3 with Cam Locks.
STEP 2
Attach Back Panel (E) to
Side Panel (B) with Cam Locks.
(See Figure 2)
Attach Back Panel (F) to unit with
Cam Locks.
STEP 4
Attach Side Panel (D) to unit
with Cam Locks.
Cam Lock
Cam Lock
Figure 2
D
F
E
B
C
G
H

Assembly Instructions 4/6
Part List
Drawer (L)
STEP 8
Attach Handle with
machine screws.
L1
L4
L3
L2
L5
STEP 5
Attach Drawer Front (L1) and Drawer
Back (L2) to Drawer Side (L3) with
Wood Screws (long).
Attach Drawer Side (L4) to unit with
Wood Screws (long).
STEP 6
Slide Drawer Bottom (L5) into the grooves
of Drawer Sides (L3) and (L4) until it meets
Drawer Front (L1).
STEP 7
Attach Drawer Bottom (L5) to unit with
Wood Screws (short).
L1
L2
L3
L4
L4
L2
L3
L1
L2.
Drawer Back
2 pcs.
L5.
Drawer Bottom
2 pcs.
L1.
Drawer Front
2 pcs.
L3.
Drawer Side
2 pcs.
L4.
Drawer Side
2 pcs.
Part List
Roller at back

Assembly Instructions 5/6
Part List
Drawer (M)
STEP 12
Attach Handle with
machine screws.
M5
STEP 9
Attach Drawer Front (M1) and Drawer
Back (M2) to Drawer Side (M3) with
Wood Screws (long).
Attach Drawer Side (M4) to unit with
Wood Screws (long).
STEP 10
Slide Drawer Bottom (M5) into the grooves
of Drawer Sides (M3) and (M4) until it meets
Drawer Front (M1).
STEP 11
Attach Drawer Bottom (M5) to unit with
Wood Screws (short).
M1
M2
M3
Part List
Roller at back
M1
M3
M2
M4
M3
M4
M5
M2
M1
M2.
Drawer Back
2 pcs.
M5.
Drawer Bottom
2 pcs.
M1.
Drawer Front
2 pcs.
M3.
Drawer Side
2 pcs.
M4.
Drawer Side
2 pcs.
M4

Assembly Instructions 6/6
Flat Washer
Long Screw
STEP 13
Attach Base (I) to unit with Washers, Long Screws
and Cam Locks. (See Figure 3)
Attach Magnet to unit with Wood
Screws for Magnet. (See Figure 4)
STEP 14
Turn the unit upright position, attach Top (A)
to unit with Cam Locks.
Slide Drawers (L) and (M) into position.
Insert Adjustable Pins into side panel and
middle panel at desired level, then place
Shelves (K) into position.
Attach Door (J) by sliding the door lift hinges
into the side panels lift hinges. (See Figure 5)
Assemble Knob to Door (J) with Machine
Screws. (See Figure 6)
To level the unit, adjust the adjustable
levelers on the bottom of unit. (See Figure 7)
Note: Unit must be level to work properly.
Cam Lock
Cam Lock
Wood Screw
for Magnet
Magnet
Adjustable Pin
I
MK
L
MK
L
J
A
Figure 7
Figure 3 Figure 4
Figure 5 Figure 6

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319