Home Styles 88 5543 101 User manual

Part List
Hardware List
E.
Base
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
A.
Top
1 pc.
H.
Plinth
1 pc.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
For assembly see instructions in carton 88 5543 102
88 5543 101
Bermuda
Entertainment Credenza
F.
Shelf
4 pcs.
Cam Lock
19 pcs.(+4 extra)
Cam Lock Screw
19 pcs.(+1 extra)
Adjustable Pin
24 pcs.(+1 extra)
Pull Handle
2 pcs.
Machine Screw
2 pcs.
Magnet
2 pcs.
Wood Screw
for Magnet
4 pcs.(+1 extra)
Wood Screw
for Back Panel
12 pcs.(+1 extra)
Tools recommended for assembly :Level
I.
Back Panel
2 pcs.
J.
Back Panel
1 pc.

Part List
B.
Side Panel
.1 pc
D2.
Middle Panel
.1 pc
C.
Side Panel
1 pc.
K.
Door
1 pc.
L.
Door
1 pc.
N.
Leg
1 pc.
M.
Leg
4 pcs.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Tools required for assembly : Phillips screwdriver
Also need the following from carton 88 5543 101 :
Hardware List in carton 88 5543 101
Cam Lock Screw
Cam Lock
Wood Screw for Back Panels
Adjustable Pin
Pull Handle
Machine Screw for Pull Handle
Magnet
Wood Screw Magnet
Part List in carton 88 5543 101
Top (A)
Base (E)
Shelf (F)
Plinth (H)
Back Panel (I)
Back Panel (J)
1 pc.
1 pc.
4 pcs.
1 pc.
2 pcs.
1 pc.
19 pcs.
19 pcs.
12 pcs.
24 pcs.
2 pcs.
2 pcs.
2 pcs.
4 pcs.
Tools recommended for assembly :Level
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5543 102
Bermuda
Entertainment Credenza
D1.
Middle Panel
.1 pc
G.
Shelf
2 pcs.

STEP 1
Assembly Instructions 2/4
A
Insert Cam Lock Screws into the pre-drilled holes of Top (A),
Base (E) and Plinth (H).
Side Panels (B), (C),
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
C
E
H
Cam Lock Screw
Wood Screw
Magnet
Attach 2X Magnets to Top (A) by using Wood Screws in the pre-drilled holes.
* Use a soft cloth between these parts and the floor.

Assembly Instructions 3/4
Figure 1
STEP 2
Attach Middle Panel (D1) and (D2)
onto Base (E) with Cam Locks.
(see Figure 1)
STEP 3
.
(see Figure 1)
Attach Plinth (H) to Base (E)
with Cam Locks.
Attach Side Panel (B) and
(C) to unit with Cam Locks
STEP 4
Attach Legs (M) and (N)
into the pre-drilled holes
of unit and tighten.
E
H
C
B
M
M
M
M
N
Cam Lock
E
D1 D2
Cam Lock

Assembly Instructions 4/4
Insert 12X Wood Screws from
the back of the unit,
tighten up all the Wood Screws.
STEP 6
Place Top (A) onto unit with Cam Locks.
Insert Adjustable Pins into
side panels and middle panels at the desired level (see Figure 4),
then place Shelves (K) and (L) into position.
To level the unit,
adjust the adjustable levelers on
the bottom of legs. (see Figure 5)
Figure 4
Figure 2
Figure 3
Figure 5 Note: Please make sure unit is level before tightening these screws.
Slide Back Panels (I) and (J)
into place.
Assemble Pull Handles to
Doors (K) and (L) with Machine Screws.
(see Figure 3)
Attach Doors (K) and (L)
by sliding the door lift hinges
into the side panels lift hinges.
(see Figure 2)
STEP 5
K
L
I
JI
K
L
A
F
F
G
G
F
F
Cam Lock
Adjustable Pin
STEP 7
Wood Screw

Part List
Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
For assembly see instructions in carton 88 5543 132
88 5543 131
Bermuda
Pier Cabinet
Cam Lock
16 pcs.(+4 extra)
Cam Lock Screw
16 pcs.(+1 extra)
Adjustable Pin
12 pcs.(+1 extra)
Pull Handle
1 pc.
Machine Screw
1 pc.
Wood Screw
for Back Panel
and Drawer Bottom
15 pcs.(+1 extra)
Tools recommended for assembly :Level
B.
Side Panel
.1 pc
C.
Side Panel
1 pc.
D.
Back Panel
1 pc.
Wood Screw (long)
for Drawer Sides
8 pcs. (+1 extra)

Part List
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Tools required for assembly : Phillips screwdriver
Also need the following from carton 88 5543 131 :
Hardware List in carton 88 5543 131
Cam Lock Screw
Cam Lock
Wood Screw for Back Panels
Adjustable Pin
Pull Handle
Machine Screw for Pull Handle
Wood Screw (long)
Wood Screw
Part List in carton 88 5543 131
Side Panel (B)
Side Panel (C)
Back Panel (D)
1 pc.
1 pc.
1 pc.
16 pcs.
16 pcs.
9 pcs.
12 pcs.
Tools recommended for assembly :Level
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5543 132
Bermuda
Pier Cabinet
A.
Top
1 pc.
E.
Front Stretcher
1 pc.
F.
Fixed Shelf
1 pc.
G.
Base
1 pc.
H.
Plinth
1 pc.
I.
Shelf
3 pcs.
J.
Leg
.4 pcs
K.
Drawer
.1 pc
(Knock-Down Construction, please refer to
the last page of these instructions for steps
to complete assembling drawers)
1 pc.
1 pc.
8 pcs.
6 pcs.

STEP 1
Assembly Instructions 2/5
A
Insert Cam Lock Screws into the pre-drilled holes of Top (A),
Base (E), Plinth (H).
Side Panel (B) and (C),
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
* Use a soft cloth between these parts and the floor.
B
C
H
Cam Lock Screw
Cam Lock Screw

Assembly Instructions 3/5
STEP 2
Attach Front Piece (E),
Fixed Shelf (F),
and Base (G) to
Side Panel (B)
with Cam Locks.
(See figure 1)
Slide Back Panel (D)
into place.
Attach Plinth (H) to Base (G)
with Cam Locks.
Figure 1
STEP 3
Attach Side Panel (C)
to the unit with Cam Locks.
Attach Legs (J) into the
pre-drilled holes of Base (G),
Side Panel (C) and tighten.
B
D
G
F
E
H
C
J
J
J
J
Cam Lock
Cam Lock
G

Assembly Instructions 4/5
STEP 4
STEP 5
To level the unit, adjust the adjustable
levelers on the bottom of legs.
(see Figure 2)
Insert 9X Wood Screws into the pre-drilled
holes of back panel.
Turn the unit to its’
upright position.
Place Top (A) onto the unit
with Cam Locks.
Insert Adjustable Pins into
side panels at the desired level.
Place Shelves (I) into position.
Slide the Drawer (K) into place.
A
I
I
I
K
Figure 2
Note: Please make sure unit is level
before tightening these screws.
Adjustable Pin
Cam Lock
Wood Screw