Home Styles 5180-16 User manual

Hardware List
Part List
Tool(s) required for assembly: Phillips screwdriver, Level
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
5180-16
Student Desk
B.
Side Frame
1 pc.
Wrench
1 pc.
Spring Washer
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
M8x50
Bolt
8 pcs. (+1 extra)
M3x32
Wood Screw
2 pcs. (+1 extra)
C.
Side Frame
1 pc.
D.
Stretcher
1 pc.
A.
Top Unit
1 pc.
Home Styles Customer Service: www.homestylesfurniture.com,
[email protected], 888-680-7460, 877-831-0319

Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Wrench as the bolts may need to be tightened in the future.
STEP 1
Place Top Unit (A) upside down on a soft cloth.
Remove drawers.
C
STEP 2
Attach Side Frame (C) to Top Unit (A) with Flat Washers,
Spring Washers and Bolts.
(See Figure 1)
Attach Stretcher (D) and Side Frame (B) to unit with Flat Washers,
Spring Washer, Bolts and Wood Screws.
(See Figure 2)
Bolt
Flat Washer
Spring Washer
Wood Screw
Figure 2
Figure 1
B
D
A
A

Assembly Instructions 3/3
STEP 3
Turn desk over to its upright position.
Remove knobs on inside of drawers and attach to
outside of drawers with machine screws.
(See Figure 3)
Slide drawers into position.
Level unit by adjusting the
adjustable levelers on bottom of unit.
(See Figure 4)
Figure 3
Knob
Machine Screw
Figure 4

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestylesfurniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestylesfurniture.com,
[email protected], 888-680-7460, 877-831-0319