Home Styles 20 05506 0307 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level, Drill (8 volts or less), 3/8” Drill Bit
IMPORTANT
M4x25
Machine Screw
4 pcs.
Bracket
2 pcs.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
M x3.5 20
Wood Screw
for Bracket
8 pcs. (+1 extra)
Adjustable Pin
12 pcs. (+1 extra)
Hinge
4 pcs.
Cam Lock Screw
22 pcs. (+2 extra)
M x635
Head Cap Bolt
8 pcs. (+1 extra)
Cam Lock
22 pcs. (+4 extra)
20 05506 0307
Hutch
Hex Wrench
1 pc.
M x13.5 5
Wood Screw
for Hinge
24 pcs. (+1 extra)
Small
Hex Wrench
1 pc.
G.
Shelf
3 pcs.
A.
Top
1 pc.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Middle Panel
1 pc.
K.
Door
1 pc.
F.
Fixed Shelf
1 pc.
E.
Middle Panel
1 pc.
H.
Back Panel
1 pc.
I.
Back Panel
1 pc.
J.
Door
1 pc.
Handle
2 pcs.

IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the screws unit each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Assembly Instructions 2/8
Figure 1
STEP 1
Insert Cam Lock Screws into pre-drilled holes in Top (A),
Side Panels (B), (C), and Fixed Shelf (F), then tighten.
(See Figure 1)
B
Cam Lock Screw
Cam Lock Screw
C
F
A

Assembly Instructions 3/8
Head Cap Bolt
A
Cam Lock
D
STEP 3
Attach Fixed Shelf (F) to unit with
,Cam Locks and Head Cap Bolts
then tighten.
Attach Back Panel (I) to unit with
Cam Locks.
STEP 2
Attach Middle Panels (D), (E)
to Top (A) with Head Cap Bolts,
then tighten. (See Figure 2)
Attach Back Panel (H) to unit
with Cam Locks. (See Figure 3)
Head Cap BoltCam Lock
F
E
H
I
Figure 2
Figure 3

Assembly Instructions 4/8
STEP 5
Attach Side Panel (C) to unit
with Cam Locks.
STEP 4
Attach Side Panel (B) to unit
with Cam Locks.
Cam Lock
B
C
Cam Lock

Assembly Instructions 5/8
Figure 5
STEP 6
Attach Hinges to Doors (J) and (K)
with Wood Screws for Hinge into
pre-drilled holes, then tighten.
(See Figure 4)
Figure 4
Wood Screw for Hinge
Hinge
J
J
STEP 7
Turn unit to its upright
position.
Insert Adjustable Pins
into side panels at
desired level.
(See Figure 5)
Place Shelves (G) into
position.
Attach Doors (J) and (K)
to unit with Wood Screws
for Hinge into pre-drilled
holes. (See Figure 6)
Attach Handles to Doors (J)
and (K) with Machine Screws.
Wood Screw for Hinge
Adjustable Pin
Machine Screw
Handle
K
K
G
G
G
Figure 6

Assembly Instructions 6/8
STEP 8
If needed, adjust doors up or down by removing the front Wood Screws for Hinge and
loosening slightly the back Wood Screws for Hinge from side panel, adjusting doors up or down
and reinstalling screws. (See Figure 7)
If needed, adjust doors left to right. (See Figure 8)
If needed, adjust doors front to back. (See Figure 9)
Figure 8
Figure 7
Figure 7
Up
Down
Left
Right
Front Back
Figure 9
Figure 8

Assembly Instructions 7/8
STEP 9
Attach Hutch to Buffet with Brackets by inserting
Wood Screws for Bracket into pre-drilled holes,
then tighten. (See Figure 10)
Hutch
Figure 10
Buffet
Wood Screw for Bracket
Bracket

Hardware List
Assembly Instructions 8/8
Drill 3/8” hole in wall
Top of unit
STEP 10
Place unit at desired location.
Drill a 3/8” hole in wall in-line with
Pre-drilled hole at top of unit.
Move unit.
Insert Anchor into the wall hole
and attach Bracket with Wall Screw.
Attach Bracket at pre-drilled hole
at top of unit with Wood Screw.
Move unit back into place.
Slide Tipover Restraint through
Bracket on wall and Bracket on unit.
(See Figure 11)
Put tie end of Tipover Restraint into lock
end of Tipover Restraint and pull until tight. Figure 11
Bracket
on wall
Anchor in wall
3/8” wall hole
Tie end
Lock end
Bracket at
top of unit
Tipover
Restraint
Wood Screw
Wall Screw Pre-drilled hole
at top of unit
Anchor
1 pc. (+1 extra)
Bracket
2 pcs. (+1 extra)
M3.5x40
Wall Screw
1 pc. (+1 extra)
M3.5x16
Wood Screw
1 pc. (+1 extra)
IMPORTANT
To help reduce the risk of the unit tipping over, the Tipover Restraint must be installed following these instructions exactly.
Tipover Restraint
1 pc. (+1 extra)

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319