Home Styles 88 5527 49 User manual

Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hardware List
Hall Tree Stand
88 5527 49
Wood Screw for
Spring
8 pcs. (+1 extra)
Wood Screw
for Hook
8 pcs. (+1 extra)
A.
Seat
1 pc.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Front Panel
1 pc.
E.
Back Stretcher
1 pc.
G.
Back Panel
1 pc.
F.
Back Stretcher
2 pcs.
H.
Arm
1 pc.
I.
Arm
1 pc.
K.
Base
1 pc. N.
Side Panel
1 pc.
O.
Side Panel
1 pc.
L.
Front Stretcher
1 pc.
M.
Top
1 pc.
J.
Leg
4 pcs.
P.
Rail
1 pc.
Q.
Back Panel
2 pcs.
R.
Back Panel
1 pc.
S.
Back Stretcher
1 pc.
T.
Back Stretcher
1 pc.
Small Hex Wrench
1 pc.
Hex Wrench
1 pc.
Head Cap Bolt
15 pcs. (+1 extra)
Cam Lock
24 pcs. (+6 extra)
Cam Lock Screw
24 pcs. (+2 extra)
Hook
4 pcs.
Wood Screw for
Back Panel
24 pcs. (+1 extra)
Spring Support
2 pcs.
Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

Assembly Instructions 2/6
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
STEP 1
Attach Legs (J) to Base (K)
with Head Cap Bolts.
Head Cap Bolts
K
J
Put Cam Lock Screws into the pre-drilled holes of Side Panel (B), (C), (N), (O) Base (K),
Top (M) and tighten.
STEP 2
BC
Cam Lock Screw
NO
K
M
Cam Lock Screw
J
J
J

Assembly Instructions 3/6
STEP 3
B
C
D
E
F
G
Cam Lock
Attach Back Stretcher (E) and (F) to Side Panel (B)
using Cam Locks.
Slide Back Panel (G) into place.
Attach Front Panel (D) to Side Panel (B) using Cam Locks.
Attach Side Panel (C) to unit using Cam Locks.
Attach Base (K) to unit using Cam Locks.
STEP 4
K
Cam Lock

Assembly Instructions 4/6
STEP 5
Attach Front Stretcher (L)
Back Stretcher (F) and (S)
to Side Panel (N) using
Cam Locks.
Slide Back Panel (R) to unit.
Attach Rail (P) to Back Stretcher (S)
and slide Back Panels (Q) to unit.
Attach Back Stretcher (T) to unit
using Cam Lock.
Attach Side Panel (O) to unit
using Cam Locks.
STEP 6
M
H
I
Attach Top (M) to unit using Cam Locks.
Attach Arm (H) and (I) to unit
with Head Cap Bolts.
Cam Lock
Head Cap Bolt
N
O
L
F
R
P
Q
Q
T
Cam Lock
S

Assembly Instructions 5/6
STEP 7
Place the top unit onto the base unit with Head Cap Bolts.
Head Cap Bolt
A
STEP 8
Attach the Seat (A) to the base unit with
Head Cap Bolts.
Spring
Support
Head Cap Bolt
Attach Spring Support to the unit with
Wood Screws into the pre-drilled holes.
(see Figure 1)
STEP 9
Figure 1
Spring
Support
Wood Screw
for Spring
Support

Assembly Instructions 6/6
STEP 10
STEP 11
Wood Screw for Back Panel
Attach Hooks to the top of unit with Wood Screws for Hooks.
(see Figure 2)
Figure 2
Hook
Hook
Wood Screw
for Hook
To level the unit,
adjust the adjustable levelers
on the bottom of legs.
(See figure 3)
Attach Wood Screws for
Back Panel to the back of the unit.
Note: Please make sure unit is level
before tightening these screws.
Figure 3