Home Styles 88 5300 006 User manual

Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Part List
(Knock-Down Construction, please refer
to the last page of these instructions for
wine rack assembly steps)
I.
Shelf
1 pc.
R.
Leg
2 pcs.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Middle Panel
1 pc. E.
Middle Panel
1 pc.
F.
Divider
2 pcs.
G.
Shelf
1 pc.
H.
Shelf
4 pcs.
A.
Bottom
1 pc.
J.
Front Rail
1 pc.
K.
Front Rail
1 pc.
L.
Back Rail
1 pc.
M.
Back Rail
1 pc.
N.
Back Panel
2 pcs.
O.
Back Piece
2 pcs.
P.
Back Panel
1 pc.
Q.
Door
1 pc.
S.
Door
1 pc.
T.
Wine Rack
1 pc.
(Knock-Down Construction, please refer
to the last page of these instructions for
drawer assembly steps)
U.
Drawer
3 pcs.
88 5300 006
Premium Buffet of Buffet
Large Buffet Base
Oak Finish
Cam Lock
24 pcs.(+1 extra)
Cam Lock Screw
24 pcs.(+1 extra)
Pull Handle
5 pcs.
Machine Screw
5 pcs.
Head Cap Bolt
4 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Wood Screw (short)
for Back Rail
6 pcs. (+1 extra)
Wood Screw (short)
for Drawer Base Part
and Wine Rack
20 pcs. (+1 extra)
Wood Screw (long)
for Drawer Side Part
and Wine Rack
32 pcs. (+1 extra)
Adjustable Pin
20 pcs.(+2 extra)

Assembly Instructions 2/7
IMPORTANT
Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
Cam Lock Screw
C
D
E
R
R
A
B
A
L
PN
M
N
OO
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Base (A),
Side .(See figure 1)Panels (B) and (C), Middle Panel (D) and (E)
STEP 3
Attach Side Panel (B) to Base (A) with
Cam Locks.
Attach Back Rail (M) to Side Panel (B) with
Cam Lock.
Attach Back Piece (O) to Back Rail (M)
and slide Back Panel (N), (P) into place.
Attach Back Rail (L) to the unit with
Cam Lock.
STEP 2
Attach Legs (R) to Base (A) with
Head Cap Bolts.(See figure 2)
B
A
Cam Lock
Head Cap Bolt
(Figure 1)
(Figure 2)
Head Cap Bolt
Hex Wrench

Assembly Instructions 3/7
STEP 6
Attach Side Panel (C) to the unit with
Cam Locks.
DE
G
Cam Lock
STEP 4
Attach Shelf (G) in between Middle Panels (D) and
(E) with Cam Locks.
Attach unit to Base (A) with Cam Locks.
(See figure 3)
J
K
F
C
F
STEP 5
Attach Front Rail (J) to the unit with Cam Lock.
Attach Dividers (F) and Front Rail (K) to the unit
with Cam Locks.
(Figure 3)
Cam Lock
Cam Lock
Cam Lock Screw

HH
H
H
Assembly Instructions 4/7
STEP 7
Slide Drawer (U) into place.
Insert Adjustable Pin into side panels and middle
panels at the desired level.
Slide Shelf (H) into position.
Assemble Pull Handles to Door (Q) and (S) with
Machine Screws.(See figure 5)
Attach Doors (Q) and (S) to the side panels, by sliding the door
lift hinges into the side panel lift hinges.(See figure 4)
T
I
(Figure 4)
(Figure 6)
(Figure 5)
STEP 8
STEP 9
Note: Adjustable shelf (I) is optional
if Wine Rack (T) is not desired
UUU
Wood Screw (short)
Adjustable Pin
Adjustable Pin
Insert 6X Wood Screws from the back of the unit,
tighten up all the Wood Screws. (See figure 6)
Note: Please make sure unit is level before
tightening these screws.
Slide Wine Rack (T) into position.

Assembly Instructions 5/7
(Figure 1)
STEP 11
Pull out the Drawers from unit.
Place Top onto the unit, using
Cam Locks.
Slide Drawers into place.
(See figure 3)
STEP 10
Using the Top option that you have chosen, put the Cam Lock Screws into the pre-drilled holes
of the Top.(See figure 1)
Cam Lock
Cam Lock Screw
(Figure 1)
(Figure 3)

Assembly Instructions 6/7
Wine Rack (T)
Part List
T2.
Rack
1 pc.
T3.
Rack
2 pcs.
T4.
Rack
2 pcs.
T5.
Rack
2 pcs.
T6.
Rack
1 pc.
STEP 2
STEP 1
Assemble Racks (T4) with (T5) as shown,
then place it into position.
Attach Rack (T1) and Rack (T2) to Racks (T3) with Wood Screws (long).
STEP 3
Attach Rack (T6) to the unit with Wood Screws
(short).
T1.
Rack
1 pc.
T1
T2
T3
T3
T4
T5
T6
T4
T5
Wood Screw (short)
Wood Screw (long)

N2
Figure 2
MAKE SURE ROLLER
IS ON THE BACK
U2
U3
U4
U5
U5
U1
Figure 3
Figure 4
Insert wood screws (4X)
into the pre-drilled holes in U5
and tighten (see Figure 3)
short
Slide U5 into the grooves in U3
and U4. Be sure to push U5 all
the way forward so it meets U1.
(see Figure 2)
STEP 2
STEP 3
STEP 4
Tighten all screws used in drawer assembly.
Assemble Pull Handle with
machine screws. (see Figure 4)
Assembly Instructions 7/7
Part List
U1.
Front Part
3 pcs.
U5.
Base Part
3 pcs.
U2.
Back Part
3 pcs.
U3.
Side Part
3 pcs.
U4.
Side Part
3 pcs.
Drawer (U)
STEP 1
Attach U1 to U3 and U4, using
a and
wood screws ,
tighten halfway.
Attach U2 to U3 and U4 using
wood screws ,
tighten halfway. (see Figure 1)
Phillips screwdriver
(4X)
(4X)
long
long
U4
U3 U1
U2
Figure 1
STEP 1
N3
U4
U1
U2
U3

Hardware List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools required for assembly : Phillips screwdriver
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
Part List
(Knock-Down Construction, please refer
to the last page of these instructions for
wine rack assembly steps)
I.
Shelf
1 pc.
R.
Leg
2 pcs.
B.
Side Panel
1 pc.
C.
Side Panel
1 pc.
D.
Middle Panel
1 pc. E.
Middle Panel
1 pc.
F.
Divider
2 pcs.
G.
Shelf
1 pc.
H.
Shelf
4 pcs.
A.
Bottom
1 pc.
J.
Front Rail
1 pc.
K.
Front Rail
1 pc.
L.
Back Rail
1 pc.
M.
Back Rail
1 pc.
N.
Back Panel
2 pcs.
O.
Back Piece
2 pcs.
P.
Back Panel
1 pc.
Q.
Door
1 pc.
S.
Door
1 pc.
T.
Wine Rack
1 pc.
(Knock-Down Construction, please refer
to the last page of these instructions for
drawer assembly steps)
U.
Drawer
3 pcs.
88 5300 007
Premium Buffet of Buffet
Large Buffet Base
Cherry Finish
Cam Lock
24 pcs.(+1 extra)
Cam Lock Screw
24 pcs.(+1 extra)
Pull Handle
5 pcs.
Machine Screw
5 pcs.
Head Cap Bolt
4 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
Wood Screw (short)
for Back Rail
6 pcs. (+1 extra)
Wood Screw (short)
for Drawer Base Part
and Wine Rack
20 pcs. (+1 extra)
Wood Screw (long)
for Drawer Side Part
and Wine Rack
32 pcs. (+1 extra)
Adjustable Pin
20 pcs.(+2 extra)

Assembly Instructions 2/7
IMPORTANT
Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
Cam Lock Screw
C
D
E
R
R
A
B
A
L
PN
M
N
OO
STEP 1
Insert Cam Lock Screws into the pre-drilled holes of Base (A),
Side .(See figure 1)Panels (B) and (C), Middle Panel (D) and (E)
STEP 3
Attach Side Panel (B) to Base (A) with
Cam Locks.
Attach Back Rail (M) to Side Panel (B) with
Cam Lock.
Attach Back Piece (O) to Back Rail (M)
and slide Back Panel (N), (P) into place.
Attach Back Rail (L) to the unit with
Cam Lock.
STEP 2
Attach Legs (R) to Base (A) with
Head Cap Bolts.(See figure 2)
B
A
Cam Lock
Head Cap Bolt
(Figure 1)
(Figure 2)
Head Cap Bolt
Hex Wrench

Assembly Instructions 3/7
STEP 6
Attach Side Panel (C) to the unit with
Cam Locks.
DE
G
Cam Lock
STEP 4
Attach Shelf (G) in between Middle Panels (D) and
(E) with Cam Locks.
Attach unit to Base (A) with Cam Locks.
(See figure 3)
J
K
F
C
F
STEP 5
Attach Front Rail (J) to the unit with Cam Lock.
Attach Dividers (F) and Front Rail (K) to the unit
with Cam Locks.
(Figure 3)
Cam Lock
Cam Lock
Cam Lock Screw