Home Styles 88 5650 49 User manual

BASE UNIT PART LIST
HARDWARE LIST
Hex Wrench
1 pc. Wood Plug
8 pcs. (+1 extra)
Wood Screw
(for Spring Support)
4 pcs.(+1 extra)
Head Cap Bolt
(long)
8 pcs.(+1 extra)
A.
Seat
1 pc.
F.
Base
1 pc.
Cross Dowel
8 pcs.(+1 extra) Spring Support
1 pc.
Head Cap Bolt
(short)
3 pcs.(+ 1 extra)
88 5650 49
Hall Tree & Storage Bench
D.
Front Panel
1 pc.
E.
Back Panel
1 pc.
B.
Side Panel
.1pc
C.
Side Panel
1 pc.
Tools Required For Assembly : Phillips screwdriver
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]

Assembly Instructions
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in a safe place as you may need to tighten up
the Head Cap Bolts in the future.
STEP 1
STEP 2
STEP 3
D
E
C
Attach the Seat (A) to the unit
with Head Cap Bolts (short).
Place the Base (F) into the storage unit.
B
E
Insert Cross Dowels into the
holes of Front Panel (D) and
Back Panel (E).
Attach the Side Panel (B) and (C)
to the Front Panel and Back Panel
with Head Cap Bolts.(See figure 1)
A
Turn over the Seat (A).
Attach Spring Support to the
Seat (A) with Wood Screws.
(See figure 2)
A
F
STEP 4
Cover all holes with
Wood Plugs
Cross Dowel
Cross Dowel
Head Cap Bolt
(long)
Head Cap Bolt
(long)
Head Cap Bolt
(short)
Wood Screw
Figure 1
Figure 2

TOP UNIT PART LIST
L.
Lower
Back Frame
1 pc.
J.
Upper
Back Frame
1 pc.
I.
Side Panel
1 pc.
G.
Top
1 pc.
H.
Side Panel
.1pc
K.
Back Frame
2pcs.
Head Cap Bolt
(short)
20 pcs.(+1 extra)
Wood Screw
8 pcs.
(+1 extra)
Wood Plug
8 pcs.
(+1 extra)
Hook
4 pcs.
HARDWARE LIST
N.
Arm
1 pc.
M.
Arm
1 pc.
88 5650 49
Hall Tree & Storage Bench
Tools Required For Assembly : Phillips screwdriver
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]

Assembly Instructions 2/3
STEP 1
STEP 2
Attach the Hooks to the Upper Back Frame (J)
with Wood Screws.
(See figure 3)
STEP 3
L
J
K
J
Assemble the Lower Back Frame(L),
Upper Back Frame (J) and Back Frame (K).
Attach the Side Frame (H) and (I)
to the assembled unit with Head Cap Bolts.
H
I
Head Cap Bolt (short)
Head Cap Bolt (short)
K
Figure 3

Assembly Instructions 3/3
STEP 4
Attach the Top (G) to the
Attach the Arm (M) and (N) to the Side Panels with Head Cap Bolts.
Side Panel (H) and (I) with Head Cap Bolts.
STEP 5
M
N
G
H
I
Place the Top Unit onto the Base Unit and
attach with Head Cap Bolts.
STEP 6
Cover all holes with
Wood Plugs
Head Cap Bolt (short)
Head Cap Bolt (short)
Head Cap Bolt (short)
Head Cap Bolt (short)