Home Styles 88 5092 942 User manual

B.
Rail
2 pcs.
C.
Side Panel
2 pcs.
D.
Leg
2 pcs.
E.
Leg
2 pcs.
G.
Shelf
4 pcs.
H.
Door
2 pcs.
I.
Door
2 pcs.
J.
Shelf
1 pc.
K.
Base
1 pc.
L.
Stretcher
2 pcs.
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
88 5092 942
Kitchen Island
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Tool(s) required for assembly: LevelPhillips screwdriver,
Carton 88 5092 941 is also needed for assembly.

Cam Lock Screw
STEP 1
Remove the Drawer from Top (A).
STEP 2
Insert Cam Lock Screws into
the pre-drilled holes of Side Panels (C).
(See Figure 1)
STEP 3
Place Top (A)
upside down on a soft cloth.
Assemble Side Panels (C)
and Rail (B) with Cam Locks.
(See Figure 2)
Place unit onto Top (A).
Assembly Instructions 2/4
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
A
C
Figure 1
Figure 2
CC
B
B
A

L
Head Cap Bolt
STEP 4
Attach Stretchers (L) to Legs (D) and (E)
with Head Cap Bolts. (See Figure 3)
STEP 5
Attach Shelves (G) to unit
at the pre-drilled holes of side panels,
then attach the assembled legs to unit
with Head Cap Bolts.
STEP 6
Attach Base (K) to unit with Head Cap Bolts.
Head Cap Bolt
Assembly Instructions 3/4
LL
D
D
D
D
E
EE
E
GG
GG
Figure 3
K

STEP 7
Attach Feet (F) to Base (K)
with Flat Washers, Spring Washers
and Head Cap Bolts. (See Figure 4)
Head Cap Bolt
Spring Washer
Flat Washer
J
Adjustable Pin
STEP 8
Attach Doors (H) and (I) by sliding the door lift hinges into the side panel lift hinges. (See Figure 5)
Attach Pull Handles to
Doors (H), (I) and Drawer with
Machine Screws. (See Figure 6)
Slide Drawer into place.
Insert Adjustable Pins into
side panels at the desired level.
Place Shelf (J) into position.
To level the unit, adjust the
adjustable levelers on the
bottom of legs. (See Figure 7)
Assembly Instructions 4/4
Figure 4
F
FF
F
K
Figure 5
Figure 7
Figure 6
H
H
J
I

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319