Home Styles 20 05520 0027 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
A.
Cushion
1 pc.
D.
Front Rail
1 pc.
E.
Front Rail
1 pc.
F.
Base
1 Pc.
20 05520 0027
Storage Bench
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
B.
Side Panel
1 Pc.
C.
Side Panel
1 Pc.
G.
Back Panel
1 Pc.
M6x32
Head Cap Bolt
4 pcs. (+1 extra)
Hex Wrench
1 pc.
Small
Hex Wrench
1 pc.
M3.5x32
Wood Screw
6 pcs.(+1 extra)
Flat Washer
4 pcs. (+1 extra )
Spring Washer
4 pcs. (+1 extra )
Cam Lock
10 pcs. (+2 extra)
Cam Lock Screw
10 pcs. (+1 extra)

Assembly Instructions 2/4
Cam Lock Screw
Cam Lock
Figure 2
STEP 1
Insert Cam Lock Screws into pre-drilled holes in
Side Panels (B), (C), Front Rail (E) and Back Panel (G), then tighten.
(See Figure 1)
STEP 2
Attach Base (F) to Back Panel (G)
with Cam Lock. (See Figure 2)
Attach Front Rail (E) to unit with Cam Lock.
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
B
C
E
F
G
E
G

Assembly Instructions 3/4
Head Cap Bolt
Spring Washer
Flat Washer
Flat Washer
Spring Washer
Head Cap Bolt
STEP 3
Attach unit and Front Rail (D) to
Side Panel (C) with Cam Locks, Head Cap Bolts,
Spring Washers and Flat Washers.
(See Figure 3)
STEP 4
Attach Side Panel (B) to unit
with Cam Locks, Head Cap Bolts,
Spring Washers and Flat Washers.
D
C
Figure 3
B
Cam Lock
Cam Lock

Assembly Instructions 4/4
STEP 5
Place Cushion (A) upside down on a soft cloth.
Attach unit to Cushion (A) with Wood Screws. (See Figure 4)
STEP 6
Turn unit over to it’s upright position.
Figure 4
A
Wood Screw

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319