Home Styles 5580-80 User manual

Hardware List
Part List
5 -80580
Chair
IMPORTANT
A.
Seat
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
B.
Leg
1 pc.
C.
Leg
1 pc.
D.
Back Frame
1 pc.
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Mx088
Head Cap Bolt (long)
8 pcs. (+1 extra)
Mx485
Head Cap Bolt
2 pcs. (+1 extra)
Flat Washer
1 pcs. (+1 extra)0
Spring Washer
1 pcs. (+1 extra)0
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.

Assembly Instructions 2/2
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Figure 1
STEP 1
Place Seat (A) upside down on a soft cloth.
Attach Legs (B) and (C) to Seat (A) with Flat Washers, Spring Washers and Head Cap Bolts (long),
tightening bolts only halfway. (See Figure 1)
Head Cap Bolt (long)
Spring Washer
Flat Washer
A
C
B

Assembly Instructions 3/3
Figure 3
STEP 2
Attach Back Frame (D) to unit with Flat Washers, Spring Washers, Head Cap Bolts
and Head Cap Bolts (long), tightening bolts only halfway. (See Figures 2 and 3)
Tighten all bolts used in Steps 1 and 2.
Head Cap Bolt (long)
Spring Washer
Flat Washer
Head Cap Bolt
Spring Washer
Flat Washer
Figure 2
D

B.
Leg
4 pcs.
5580-32
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Hardware List
Part List
Tool(s) required for assembly: Level
Spring Washer
8 pcs. (+1 extra)
Flat Washer
8 pcs. (+1 extra)
Small Hex Wrench
1 pc.
M8x70
Head Cap Bolt
8 pcs. (+1 extra)
styles Customer Service: www.homestylesfurniture.com,home
[email protected], 888-680-7460
Round Dining Table
A.
Top
1 pc.
Hex Wrench
1 pc.

Assembly Instructions 2/3
STEP 1
Place Top (A) upside down on a soft cloth.
Attach Legs (B) to Top (A) with Flat Washers,
Spring Washers and Head Cap Bolts, tightening
bolts only halfway. (See Figure 1)
Tighten all bolts. Figure 1
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
Do not tighten all the bolts until each part is properly assembled.
Keep Hex Wrench as the bolts may need to be tightened in the future.
Head Cap Bolt
Spring Washer
Flat Washer
B
A
B
B
B