HON basyx BSXLMOL User manual

1 of 4
Model No.BSXLMOL
ATTENTION
Make sure all bolts, screws and other fasteners are fully tightened before use.Tighten all bolts/
screws/other fasteners at least every 6 months or whenever needed.
To ensure proper assembly, follow all steps and use all parts. Failure to follow this warning
can result in serious injury to yourself or others.
WARNING!
Tools Required
for assembly Assembly Time
or
Phillips

2 of 4
STEP 1
4
5
Long
Make sure the holes are on the same side.
6
7
Short
1
X 1
2
X 1
3
X 3
X 9 (1 for spare) X 19 (1 for spare)
X 2
A
B.M6*20 C.M6*30
X 13 (1 for spare)
D.M6*35
X 13 (1 for spare)
E.ST 3.5*14mm
X 1
F
4
X 1
Long
5
X 1
Long 6
X 1
Short 7
X 1
Short

3 of 4
STEP 3
STEP 4
B
B
B
B
BB
B
B
3-1 Put in the Legs (3) as the illustration.
3-2 Assemble legs (3) to support with
screws(B),Hand-Tight only (do not
tighten them completely)
C*6
DD
DD
DD
C*6
C*6
B X 6
C X18 D X 6
STEP 2
2-1 Assemble support (4)(5) to Top (1) with
screws (D).Hand-Tight only(do not tighten
them completely).
2-2 Assemble support (6)(7) to Top (2) with
screws (D).Hand-Tight only(do not tighten
them completely)
D
D
D
D
D
1
D X 5
CC
C
C
C
CDD
4-1 Assemble leg and support to top with screws (C) and (D) as
illustration, Hand-Tight only (do not tighten them completely).
4-2 Completely tighten screws (D)in Step 2
4-3 Completely tighten screws (B) in step 3
4-4 Completely tighten screws (C)
and (D) in Step 4
Note the holes orientation
related to the nut on the top.
2
3
3
3

4 of 4
STEP 5 (Right side assembly)
STEP 6
STEP 5
(Left side assembly)
5-1 Place and assemble two sub-assembly with screws (B) and (D) as
illustration.
5-2 Align the top edges.
5-3 Completely tighted screws (D) and then screws(B).
5-4 Assembly the plates (A) with screws (E).
5-1 Place and assemble two sub-assembly with screws (B) and (D) as
illustration.
5-2 Align the top edges.
5-3 Completely tighted screws (D) and then screws(B).
5-4 Assembly the plates (A) with screws (E).
D
BB
A
E*6 A
E*6
B
B
D
A
A
E*6
E*6
BB
D
A
E*6
A
E*6
B X 2 D X 1 E X12A X 2
B X 2 D X 1 E X12A X 2
(Right side assembly)
(Left side assembly)
BB
D
A
E*6
A
E*6