Honeywell TruStability TSC Series User manual

Installation Instructions for the
TruStability®Board Mount Pressure Sensors
TSC Series, Compensated/Unamplified
±60 mbar to ±10 bar | ±6 kPa to ±1 MPa | ±1 psi to ±150 psi
Millivolt Analog Output
NSC Series, Uncompensated/Unamplified
±2.5 mbar to ±10 bar | ±250 Pa to ±1 MPa | ±1 inH2O to ±150 psi
Millivolt Analog Output
Issue 5
50063864
Honeywell’s TruStability®TSC Series and NSC Series are
piezoresistive silicon pressure sensors offering a ratiometric analog
output for reading pressure over the specified full scale pressure
span and temperature range.
TSC Series:
•Temperaturecompensatedandunamplified.
•Compensationmakesiteasiertointegratethesensorintoa
system by eliminating the need to calibrate the system over
temperature and also offers reduced part-to-part variation.
•Compensatedtemperaturerangeis0°Cto85°C[-32°Fto
185°F].
•Operatingtemperaturerangeis-40°Cto85°C[-40°Fto
185°F].
•MeasuresdifferentialorgagepressuresNSC Series:
•Uncompensatedandunamplified.
•Allowscustomerstheflexibilityofperformingtheirown
calibration while still benefiting from the industry-leading
stability, accuracy, and repeatability that the Honeywell
TruStability®Pressure Sensors provide.
•Operatesasspecifiedfrom-40°Cto85°C[-40°Fto185°F].
•Measuresabsolute,differentialorgagepressures.The absolute versions have an internal vacuum reference and an
output value proportional to absolute pressure. Differential versions
allow measurement of pressure between two pressure ports. Gage
versions are referenced to atmospheric pressure and provide an
output proportional to pressure variations from atmosphere.
The TSC Series and NSC Series sensors are intended for use with
non-corrosive, non-ionic gases, such as air. Port 1 can also be used
fornon-corrosive,non-ionicliquidsonsensorsratedabove60mbar|6kPa|1psi.TheTSCandNSCSeriesoffernumerouspackagestylesandmountingoptions,makingiteasierfordevicemanufacturerstointegrate the product into their applications. These sensors offer
infiniteresolutiononthepressuresignal.Frequencyresponseisalsotypicallylimitedonlybytheenduser’ssystem.AllproductsaredesignedandmanufacturedaccordingtoISO9001.Table 1. Absolute Maximum Ratings1
Characteristic Min. Max. Unit
Supply voltage (Vsupply)2:
pressure ranges >60mbar|6kPa|1psipressure ranges <40mbar|4kPa|20inH2O-12.0012.07
Vdc
Storage temperature -40[-40]85[185]°C[°F]Soldering time and temperature:
lead solder temperature (SIP, DIP)
peakreflowtemperature(SMT)4smax.at250°C[482°F]15smax.at250°C[482°F]1Absolutemaximumratingsaretheextremelimitsthedevicewillwithstandwithoutdamage.2Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.

2 Honeywell Sensing and Control
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Table 2. Operating Specifications
Characteristic Min. Typ. Max. Unit
Supply voltage (Vsupply):1,2pressure ranges >60mbar|6kPa|1psipressure ranges <40mbar|4kPa|20H2O1.52.75.05.012.06.5Vdc
Supplycurrent(at5.0Vdcsupply)TSC Series
NSC Series
—
—0.61.51 2.2mAOperatingtemperaturerange3-40[-40]—85[185]°C[°F]Compensated temperature range40[32]—85[185]°C[°F]Startup time — — 5ms
TSC Series output resistance —2.5—kOhm1Ratiometricity of the sensor (the ability of the device output to scale to the supply voltage) is achieved within the specified operating voltage.
2Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.
3Operatingtemperaturerange:Thetemperaturerangeoverwhichthesensorwillproduceanoutputproportionaltopressure.4Compensated temperature range: The temperature range over which the sensor will produce an output proportional to pressure within the specified perfor-
mance limits.
Table 3. Environmental Specifications
Characteristic Parameter
Humidity 0%to95%RH,non-condensingVibration MIL-STD-202F,Method214A,Condition1E(15g,10Hzto2kHz)ShockMIL-STD-202F,Method213B,ConditionF(100g,6msduration)Life11 million pressure cycles minimum
Solder reflow J-STD-020-DMSL1(unlimitedshelflifewhenstoredatlessthan30°Cand85%RH)1Life may vary depending on the specific application in which the
sensor is utilized.
Table 4. Wetted Materials1
Component Port 1
(Pressure Port)
Port 2
(Reference Port)
Ports and covers high temperature
polyamide
high temperature
polyamide
Substrate alumina ceramic alumina ceramic
Adhesivesepoxy,RTVepoxy,RTVElectroniccomponents silicon silicon, glass, gold
1Contact Honeywell Customer Service for detailed material information.
CAUTION
PRODUCT DAMAGE
Ensure liquid media is applied to Port 1 only; Port 2 is not
compatible with liquids.
TruStability® sensors are dead-ended devices. Particulates
can accumulate inside the sensor, causing damage or
affecting sensor output.
downwards; any particulates in the system are less likely
to enter and settle within the pressure sensor if it is in this
position.
build-up inside the sensor may affect sensor output.
effectiveness for removing residue.
Non-compatible liquid media will degrade sensor
performance and may lead to sensor failure.
Failure to comply with these instructions may result in
product damage.

Honeywell Sensing and Control 3
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Figure 1. DIP Package Dimensional Drawings (For reference only: mm [in])
Dimensions
DIP NN: No ports
DIP AN: SIngle axial barbed
port
DIP LN:Singleaxialbarblessport
1 2 3 4
10,0
[0.39]
PORT 1
8 7 6 5
6,2
[0.24]
2,54 TYP.
[0.100]
9,24
[0.364]
11,21
[0.441]
7,95
[0.313]
13,75
[0.541]
4,93
[0.194] PORT 2 6,99
[0.275]
8X 0,46
[0.018]
0,25
[0.010]
13,3
[0.5
3]
PIN 1
INDICATOR
PORT 1
PORT 2
10,0
[0.39]
6,99
[0.275 ]
2, 54 TYP.
[0.100]
6,95
[0.274]
1,00
[0.039]
9,24
[0.364]
11,21
[0.441]
13,75
[0.541]
5,80
[0.228]
1 2 3 4
8 7 6 5
8X 0,46
[0.018]
0,25
[0.010]
2,47
[0.097]
13,3
[0.5
3]
PIN 1
INDICATOR
10,0
[0.39]
6,99
[0.275]
1 2 3 4
8 7 6 5
10,85
[0.427]
9,24
[0.364]
5,44
[0.214]
2,54 TYP.
[0.100]
8X 0,46
[0.018]
0,25
[0.010]
PORT 1 PORT 2
13,3
[0.5
3]
PIN 1
INDICATOR

4 Honeywell Sensing and Control
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Figure 1. DIP Package Dimensional Drawings (continued)
Dimensions
DIP RN: Single radial barbed
port
DIP RR: Dual radial barbed
ports, same side
DIP DR: Dual radial barbed
ports, opposite sides
10,0
[0.39]
PORT 1
1 2 3 4
8 7 6 5
6,16
[0.242]
9,24
[0.364]
2,54 TYP.
[0.100]
15,76
[0.620]
11,21
[0.441]
2X 1,93
[0.076]
6,99
[0.275]
8X 0,46
[0.018]
0,25
[0.010]
PORT 1 PORT 2
3,78
[0.149]
13,3
[0.5
3]
PORT
2
PORT 1
13,3
[0.53]
10,0
[0.39]
6,99
[0.275]
1 2 3 4
8 7 6 5
11,21
[0.441]
9,24
[0.364]
5,80
[0.228]
2,54 TYP.
[0.100]
8X 0,46
[0.018]
0,25
[0.010]
1,93
[0.076
]
4,2
[0.17]
PORT 2
8X 0,46
[0.018]
13,3
[0.53]
10,0
[0.39]
6,99
[0.275]
1 2 3 4
8 7 6 5
6,16
[0.242]
2,54 TYP.
[0.100] 11,21
[0.441]
9,24
[0.364]
2X 1,93
[0.076
]
4,65
[0.183]
,25
[0.010]
PORT 1 PORT 2
PORT 1
PORT 2
4,0
[0.16]
3,78
[0.149
]
0

Honeywell Sensing and Control 5
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Figure 1. DIP Package Dimensional Drawings (continued)
Dimensions
DIP JN: Single radial barbless
port
DIP JJ: Dual radial radial
barbless ports, same side
1 2 3 4
8 X 0,46
[0.018]
11,92
[0.469]
9,24
[0.364]
2X 6,75
[0.266]
PORT 1
6,51
[0.256] 4,76
[0.187] 1,9
[0.07]
PORT 1
PORT 2
1,94
[0.076]
8 7 6 5
2,54
[0.100]
3,28
[0.129]
2,21
[0.087]
4,1
[0.16]
4,1
[0.16]
4,2
[0.16]
9,91
[0.390]
9,40
[0.370]
2X 2,34
[0.092]
0,25
[0.010]
7,00
[0.276]
13,3
[0.53]
1 2 3 4
8 X 0,461
[0.018]
11,92
[0.469]
9,24
[0.364]
2,34
[0.092]
6,75
[0.266]
PORT 1
7,58
[0.298] 1,9
[0.07]
PORT 1
PORT 2
6,70
[0.264]
8 7 6 5
3,28
[0.129]
3,28
[0.129]
7,00
[0.276]
4,1
[0.16]
9,91
[0.390]
9,40
[0.370]
0,25
[0.010]
13,3
[0.53]
Figure 2. SMT Package Dimensional Drawings (For reference only: mm [in])
Dimensions
SMT NN: No ports
13,3
[0.53]
10,0
[0.39]
6,99
[0.275]
1 2 3 4
8 7 6 5
5,44
[0.214]
2,54 TYP.
[0.100] 6,41
[0.252]
4,80
[0.189]
8X 0,46
[0.018]
PORT 1 PORT 2
PIN 1
INDICATOR

6 Honeywell Sensing and Control
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Figure 2. SMT Package Dimensional Drawings (continued)
Dimensions
SMT AN:SingleaxialbarblessportSMT LN:SingleaxialbarblessportSMT RN: Single radial barbed port
13,3
[0.53]
10,0
[0.39]
6,99
[0.275]
1 2 3 4
8 7 6 5
5,80
[0.228]
2,54 TYP.
[0.100] 6,77
[0.266]
4,80
[0.189]
8X 0,46
[0.018]
PORT
1
1,93 DIA.
[0.076]
4,2
[0.17]
PORT 1PORT 2
10,0
[0.394]
6,99
[0.275]
1 2 3 4
8 7 6 5
2,54 TYP.
[0.100] 6,77
[0.266]
4,80
[0.189]
5,80
[0.228]
13,75
[0.541]
8X 0,46
[0.018]
PORT 1
PORT 2
2,47 DIA.
[0.097]
13,3
[0.53]
PIN 1
INDICATOR
1 2 3 4
8 7 6 5
10,0
[0.39]
7,95
[0.313]
13,75
[0.541]
4,93 DIA.
[0.194]
2,54 TYP.
[0.100]
PORT
1
PORT
2
6,77
[0.266]
4,80
[0.189] 8X 0,46
[0.018]
6,99
[0.275]
13,3
[0.53]
PIN 1
INDICATOR

Honeywell Sensing and Control 7
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Figure 2. SMT Package Dimensional Drawings (continued)
Dimensions
SMT RR: Dual radial barbed
ports, same side
SMT DR: Dual radial barbed
ports, opposite sides
SMT JN: Single radial barbless
port
1 2 3 4
8 7 6 5
PORT 1
PORT 2
10,0
[0.39]
6,99
[0.275]
2X 2,93
[0.115]
15,8
[0.62]
2,54 TYP.
[0.100]
2X 1,93 DIA.
[0.076]
6,77
[0.266]
4,80
[0.189]
6,16
[0.242]
3,78
[0.149]
8X 0,46
[0.018]
13,3
[0.53]
10,0
[0.39]
6,99
[0.275]
1 2 3 4
8 7 6 5
6,16
[0.242]
2,54 TYP.
[0.100] 6,77
[0.266]
4,80
[0.189] 8X 0,46
[0.018]
13,3
[0.53]
4,6
[0.18]
PORT 1
PORT 2
2X 1,93 DIA.
[0.076]
PORT 1 PORT 2
4,0
[0.16]
3,78
[0.149]
1 2 3 4
8 X 0,461
[0.018]
7,48
[0.294]
4,80
[0.189]
2,34
[0.092]
13,3
[0.53]
6,75
[0.266]
PORT 1
6,51
[0.256]
9,91
[0.390]
1,87
[0.074]
PORT 1
PORT 2
5,38
[0.212]
8 7 6 5
9,40
[0.370]
3,28
[0.129]
2,21
[0.087]
7,00
[0.276]
4,15
[0.163]
2,54
[0.100]
8 X 1,28
[0.050]
6,98
[0.275]

8 Honeywell Sensing and Control
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Figure 3. SIP Package Dimensional Drawings (For reference only: mm [in].)
Dimensions
SIP NN: No ports
SIP AA: Dual axial barbed
ports, opposite sides
Figure 2. SMT Package Dimensional Drawings (continued)
Dimensions
SMT JJ: Dual radial
barbless ports, same side
PORT 1 PORT 2
0,25
[0.010]

10,0
[0.39]
10,0
[0.39]
2,54 TYP.
[0.100]
15,2
[0.60]
22,06
[0.869]
2X 4.93 DIA.
[0.194]
4X 0,51
[0.020]
2,54 TYP.
[0.100]
10,0
[0.39]
15,2
[0.60]
10,0
[0.39]
1 2 3 4
4X 0,51
[0.020]
4,87
[0.192]
PORT 1PORT 2
0,25
[0.010]
1 2 3 4
8 X 0,461
[0.018]
8,36
[0.329]
5,68
[0.189]
2X 2,34
[0.092]
2X 6,75
[0.266]
PORT 1
7,58
[0.298] 4,76
[0.187]
PORT 1
5,38
[0.212]
8 7 6 5
3,28
[0.129]
7,00
[0.276]
4,15
[0.163]
2,54
[0.100]
8 X 1,28
[0.050]
6,98
[0.275]
PORT 2
4,162
[0.1639]
9,91
[0.390]
9,40
[0.370]
13,3
[0.53]

Honeywell Sensing and Control 9
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Figure 3. SIP Package Dimensional Drawings (continued)
Dimensions
SIP AN:Singleaxialbarbedport
SIP LN: Single axial
barbless port
SIP FF:Fastenermount,dualaxialbarbedports,opposite sides
10,0
[0.39]
15,2
[0.60]
10,0
[0.39]
1 2 3 4
2,54 TYP
.
[0.100]
PORT 1
PORT 2
0,25
[0.010]
13,75
[0.541]
4X 0,51
[0.020]
2,47 DIA.
[0.097]
0,25
[0.010]
2,54 TYP.
[0.100]
PORT 1

10,0
[0.39]
4.93 DIA.
[0.194]
10,0
[0.39]
13,75
[0.541]
15,2
[0.60]
PORT 2
4X 0,51
[0.020]
0,25
[0.010]
27,20
[1.071]
10,44
[0.411]
PORT 1
PORT 2
2X 4,78 DIA.
[0.188]
[
29,48
[1.161]
23,12
[0.910]
2X 3.94 DIA.
0.155]
4X 0,51
[0.020]
2,54 TYP.
[0.100]

17,78
[0.700
]
20,16
[0.794
]

10 Honeywell Sensing and Control
TSC Series, Compensated/Unamplified
NSC Series, Uncompensated/Unamplified
Issue 5
50063864
Figure 3. SIP Package Dimensional Drawings (continued)
Dimensions
SIP FN: Fastenermount,
singleaxialbarbedportSIP GN: Ribbed fastener
mount,singleaxialbarbedport
SIP NB:Fastenermount,dualaxialports,sameside

17,78
[0.700]
20,16
[0.794]
2,54 TYP.
[0.100]
0,25
[0.010]
29,48
[1.161]
23,12
[0.910] 3257325716,38
[0.645]
2X 3.94 DIA.
[0.155] 4.78 DIA.
[0.188]
4X 0,51
[0.020]
2,54 TYP.
[0.100]
21,60
[0.850]
PORT 1
PORT 2 4.78 DIA.
[0.188]
0,25
[0.010]
2X 3,94 DIA.
[0.155]
27,96
[1.101]
16,51
[0.650]
19,06
[0.750]
10,63
[0.418]
4X 0,51
[0.020]
0,25
[0.010] 2,54 TYP.
[0.100]
22,87
[0.900]
13
[0.52]
2X 3.50 DIA.
[0.138]
21,60
[0.850]
27,31
[1.075] 25,3
[0.996]
PORT 1
PORT 2

4X 0,51
[0.020]
2X 4,80 DIA.
[0.189]