Honeywell Dolphin CN80G User manual

CN80G CAC Reader
and Ethernet Base
Quick Start Guide
CN80G-CAC-EN-QS-01 Rev A
04/19

1
Model: CN80G-CAC, CN80-EB-C
Caution: We recommend the use of Honeywell
accessories and power adapters. Use of any non-
Honeywell accessories or power adapters may cause
damage not covered by the warranty
Caution: Make sure that all components are dry prior to
using the computers and batteries with accessories.
Using wet components may cause damage not covered by
the warranty.
About the Common Access Card Reader
Before you connect the Dolphin CN80G to the CAC Reader,
make sure you have the most current software installed. To
check the computer’s system information:
1. Swipe up from the bottom of the Home screen to access all
apps.
2. Tap HUpgrader to open the Honeywell Updater app.
The OTA version number installed on the computer appears
on the screen.
The OTA version must be 85.06.00-(0145) or higher. How to
install OTA updates can be found in the Dolphin CN80G User
Guide on www.honeywellaidc.com.

2
About the Status LED
Install the CN80G CAC Reader
Status Description
Flashing Green The reader is connected to CN80G.
Solid Green The reader is reading a common access card.
Status LED

3
Remove the CN80G CAC Reader
Insert the Card
Insert a common access card into the slot with the contact pins
facing up.

4
Ethernet Base
The CAC Reader Ethernet Base (Model CN80-EB-C) is ordered
and sold separately. For help, contact your local sales represen-
tative.
Connect Power
Use only a UL Listed power supply which has been qualified by
Honeywell with an output rated at 12 VDC and 3 A. The power
supply input rating is 90-264 VAC, 50/60 Hz. The operating
temperature is -20 °C to 40 °C (-4 °F to 104 °F). The maximum
output of the terminal is 9VDC/2A.
1. Plug the power cord into the power supply.
2. Plug the power supply cable into the power connector on
the back of the base.
3. Plug the power cord into a standard wall outlet.
Ethernet Port
USB Host DC Power

5
Charge the Battery Pack
Insert a battery pack into the base.

6
About the Status LEDs
Note: The Dolphin CN80G with an attached CAC Reader can only
be used with the CAC Reader Ethernet Base.
LED Status Description
Ethernet
Status
Solid
White
CN80G is connected to an Ethernet network.
Off There is no Ethernet connection or CN80G
mobile computer is not connected.
Dock Status Solid
White
The device is connected to the base.
Battery LED
Dock LED
Ethernet LED

7
Battery
Status
Solid
Green
The battery is connected to external power
and is fully charged.
Solid
Amber
The battery is connected to external power
and is charging.
Blinking
Red
There is a battery charging fault, such as
over-temperature.
LED Status Description

8
Mount the Base
You can mount the base on a flat, horizontal surface such as a
desktop or workbench with an optional DIN rail.
Mounting hardware required:
•DINrail
• 3/16-inch diameter x 5/8-inch long pan head screw
• 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
• 3/16-inch diameter nut
1. Slide the DIN rail into the slot on the bottom of the
base.
2. Secure the DIN rail to the flat surface with the hardware.

9
Support
To search our knowledge base for a solution or to log into the
Technical Support portal and report a problem, go to
www.hsmcontactsupport.com.
Product Documentation
Product documentation is available at www.honeywellaidc.com.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and
click Get Resources > Product Warranty.
Patents
For patent information, see www.hsmpats.com.
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make
changes in specifications and other information contained in
this document without prior notice, and the reader should in all
cases consult HII to determine whether any such changes have
been made. The information in this publication does not
represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or
omissions contained herein; nor for incidental or consequential
damages resulting from the furnishing, performance, or use of
this material. HII disclaims all responsibility for the selection
and use of software and/or hardware to achieve intended
results.
This document contains proprietary information that is
protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated into
another language without the prior written consent of HII.