Honeywell 748LC User manual

IN04004 Sensor_Guide.qxd 7/19/05 12:24 PM Page 2

PIR Motion Sensors ....................................Page 2
DUAL TEC®Motion Sensors ......................Page 7
Glassbreak Detectors ..................................Page 12
Hold-Up Switches ........................................Page 17
Photoelectric Beams ....................................Page 18
Selected Magnetic Contacts ......................Page 19
Other Key Products......................................Page 20
All trademarks are properties of their respective owners
TABLE OF CONTENTS
Competitive Cross Reference Chart...Inside Back Cover
IN04004 Sensor_Guide.qxd 7/19/05 12:25 PM Page 6

IS-2260
Pet Immune PIR
"The only pet immune
PIR with range extended
to 60 ft."
Accessories
• Long Range Lens 100’x20’, 0-900-053-02
• 10’ mtg. height lens 60’x120’, 0-900-053-01
• Swivel Bracket - SMB10
• Ceiling Bracket - SMB10C
• Tampered Swivel Bracket - SMB10T
Features
• 60’ x 120’ coverage, plus lookdown zone
• Pet immunity to 40 lbs.
• ASIC signal processing
• Bi-directional temp comp
• Ultra-low current (<4mA)
• Uniform Sensitivity Optics
• Totally silent relay
• Zero Clearance black bug guard
• 7.5 or 10’ mounting height
• Available with tamper as IS-2260T
Specifications:
• Range: 60’ x 120’
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: Intermediate, Std, Harsh
• Temp comp: Advanced dual-slope
• Alarm relay: Form A
• Input voltage: 8-14VDC
• Standby current: 4mA
• Indicators: Red LED
• Operating temp: 14°F to 122°F
• Dimensions: 4-3/8"L x
2-1/4"W x 1-1/2"D
AURORA
Pet Immune PIR
"Pet immunity with
distinctive styling."
Accessories
• Long Range Lens 75’x10’ - Aurora-LR
Features
• Pet immunity to 40 lbs.
• ASIC signal processing
• Bi-directional temp comp
• Ultra-low current (<4mA)
• Split-Zone Optics
• Totally silent relay
• Bug guard
• 6.5 - 9’ mouting height
• Available with tamper as AURORA-T
• Available in 6-pack as AURORA-PK
Specifications:
• Range: 35’ x 45’
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: Intermediate, Std, Harsh
• Temp comp: Advanced dual-slope
• Alarm relay: Form A
• Input voltage: 8-14VDC
• Standby current: 4mA
• Indicators: Red LED
• Operating temp: 14°F to 122°F
• Dimensions: 2.9"W x 4.1"H x 1.5"D
PIR Motion Sensors
2
IN04004 Sensor_Guide.qxd 7/19/05 12:26 PM Page 7

IS-215T
Entry Level PIR
“Basic space protection at
an economical price.”
Features
• Selectable pulse count
• Uniform Sensitivity Optics
• Patented lookdown mirror
• Zero Clearance black bug guard
• Tamper switch
Accessories
• Swivel Bracket - SMB10
• Ceiling Bracket - SMB10C
• Tampered Swivel Bracket - SMB10T
Specifications:
• Range: 40’ x 40’
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: High and low sensitivity
• Alarm relay: Form A
• Input voltage: 10-14VDC
• Standby current: 20mA
• Indicators: Red LED
• Operating temp: 14°F to 122°F
• Dimensions: 3.43”H x 2.44”W x 1.57”D
IS-310/IS-320
Request-To-Exit PIR
“Basic and fully-featured
RTEs for every access
control application.”
Features
• Adjustable relay time
• Micro-based signal processing
• Adjustable shutters provide precise
target area
• Advanced features on IS-320 include:
• Piezo sounder
• Door contact input
• Reader/keypad/keyswitch input
• Remote arming and sounder inputs
• Monitor Door and Fail Safe/Secure
modes
• Available in white or black
Specifications:
• Range: From 5.5’ x 2’ up to 8.4’ x 15.8’
depending on mounting height
• Mounting height: 7’ to 15’
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: RTE and Security modes
• Temp comp: Advanced dual-slope
• Alarm relay: Form C
• Input voltage: 12-28 volts AC or DC
• Standby current: 35mA
• Indicators: Green (ready) LED
• Operating temp: 14°F to 122°F
• Dimensions: 7”L x 2”H x 2”D
Accessories
• IS-310WHTP - single gang trim plate for
IS-310/320 white
• IS-310BLTP - single gang trim plate for
IS-310/320 black
PIR Motion Sensors
3
New
New
IN04004 Sensor_Guide.qxd 7/19/05 12:29 PM Page 10

997
Ceiling Mount PIR
“Easy installation with a
twist-off cover.”
Features
• Twist off cover for easy removal
• Local and remote control of LED
• Low profile
• Cover tamper
Specifications:
• Range: 23’ diameter @ 8’ mounting
height
• 36’ diameter @ 12’ mounting height
• Mounting height: 12’ maximum
• Detectable walk rate: 0.5’ - 5’/sec
• Signal Proc.: 1- or 2-event
• Alarm relay: Form A
• Input voltage: 12VDC nominal
• Standby current: 17mA
• Indicators: Red LED
• Operating temp: 32°F to 122°F
• Dimensions: 3-1/2”diameter x 1”high
PIR Motion Sensors
4
995
Flush Mount PIR
“Single gang-box
installation with years of
proven performance.”
Accessories
• Long Range Lens - 70’x8.5’ - 995LR
• Pett alley - 40’x56’ - 995PA
Features
• Fits single gang box
• “Signature Analysis” pulse count
• Horizontal and vertical adjustment
• Optional long range and pet
alley lenses
Specifications:
• Range: 40’ x 56’
• Detectable walk rate: 0.5’ - 5’/sec
• Signal Proc.: 1- or 2-event
• Alarm relay: Form A
• Input voltage: 12VDC nominal
• Standby current: 15mA
• Indicators: Red LED
• Operating temp: 32°F to 122°F
• Dimensions: 2.75”W x 4.53” H x 0.8”D
IN04004 Sensor_Guide.qxd 7/19/05 12:29 PM Page 11

PIR Motion Sensors
5
IS-280CM
360° Ceiling
Mount PIR
“Commercial features and
performance for overhead
installations.”
Features
• Mounting heights from 8’ to 12’
• Low profile housing
• Microprocessor-based signal
processing
• Sealed optics chamber
• Can be mounted on a single gang-box
• Cover tamper
.• Range: 45’ dia. @ 10’ mounting height
50’ dia. @ 12’ mounting height
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: 1, 2, 3, or 4 pulse count
• Temp comp: Advanced dual-slope
• Alarm relay: Form A
• Input voltage: 9-30VDC
• Standby current: 17mA
• Indicators: Three red LEDs for 360°
viewing
• Operating temp: 14°F to 122°F
• Dimensions: 4.9” Diameter x 1.5”H
IS-290CM-W/IS-290CM-N
Ceiling Mount PIR
“Ideal for commercial
installations where wall
mounting is difficult.”
Features
• Mounting heights from 8’ to 12’
• Fully adjustable mirror optics
• Low profile housing
• Microprocessor-based signal
processing
• Can be mounted on a single gang-box
• Cover tamper
Specifications:
• Range: 40’ x 45’ (IS-290CM-W)
65’ x 7’ (IS-290CM-N)
@ 10’ mounting height
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: 2 or 4 pulse count
• Temp comp: Advanced dual-slope
• Alarm relay: Form A
• Input voltage: 10-30VDC
• Standby current: 25mA
• Indicators: Red (alarm), yellow (alarm
memory) LEDs
• Operating temp: 14°F to 122°F
• Dimensions: 6” Diameter x 1.81”D
IN04004 Sensor_Guide.qxd 7/19/05 12:32 PM Page 14

PIR Motion Sensors
998MX
V-Plex PIR
Motion Sensor
“The V-Plex motion sensor
with both DIP switch and
serial number programming.”
Features
• DIP switch and serial number
addressable
• EZ-Mount features for rapid installation
• Long range and pet alley lenses
included
• Automatic temperature compensation
• 1 mA current with LED disabled
• Tamper
Accessories
• Mounting Bracket - 998SB
Specifications:
• Range: 50’ x 50’
• Detectable walk rate: 0.5’ - 5’/sec
• Signal Proc.: 1-, 2-, or 3-event
• Temp comp: Standard
• Alarm relay: Polling Loop
• Input voltage: 8-11VDC
• Standby current: 1mA
• Indicators: Red LED
• Operating temp: 14°F to 122°F
• Dimensions: 2-5/8” W x 4-3/8” H x 2”D
5894PI
Wireless Pet Immune PIR
for 5800
“End-user replaceable
battery operation.”
Features
• Up to 10 year battery life
• Pet immune to 80 lbs.
• Uniform Sensitivity Optics
• Easy mount/dismount bracket for
end-user replaceable batteries
• Cover and rear tamper
• Patented black bug guard
• Install 5890PI or 5890 until 5894PI
is available.
Specifications:
• Range: 35’ x 45’
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: Intermediate, Std, Harsh
• Temp comp: Standard
• Batteries: Three CR123A or equivalent
• Battery life: Up to 10 years
• Indicators: Red LED
• Operating temp: 32°F to 122°F
• Dimensions: 3.5”W x 5.2”H x 1.75”D
6
Coming Soon!
IN04004 Sensor_Guide.qxd 7/19/05 12:34 PM Page 15

DUAL TEC
®
Motion Sensors
DT-7235T
DUAL TEC®Motion Sensor
“Economical sensor
combines K-Band, pet
immunity and error-free
installation.”
Accessories
• Swivel Bracket - SMB10
• Ceiling Bracket - SMB10C
• Tampered Swivel Bracket - SMB10T
Features
• Pet immune to 100 lbs.
• Exclusive K-Band microwave
technology
• Fast and simple installation with no
adjustments
• Microwave supervision
• Uniform Sensitivity Optics
• Zero Clearance black bug guard
• Tamper
Specifications:
• Range: 35’ x 35’
• Microwave Freq: K-Band, 24.125GHz
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: No adjustments required
• Temp comp: Standard
• Alarm relay: Form A
• Input voltage: 7.5-16VDC
• Standby current: 25mA
• Indicators: Red LED
• Operating temp: 14°F to 131°F
• Dimensions: 4.685”H x 2.795”W
x 1.654”D
DT-7435
DUAL TEC®Motion Sensor
“Pet immune protection that
incorporates the latest
processing technology.”
Accessories
• Swivel Bracket - SMB10
• Ceiling Bracket - SMB10C
• Tampered Swivel Bracket - SMB10T
Features
• Pet immune to 100 lbs.
• Exclusive K-Band microwave
technology
• DualCore micro-based processing
• Concurrent Diagnostics
• Digital microwave adaptive thresholds
• Digital fluorescent light filter
• Uniform Sensitivity Optics
• Zero Clearance black bug guard
• Tamper
• Also available with Form C
as DT-7435C
Specifications:
• Range: 35’ x 35’
• Microwave Freq: K-Band, 24.125GHz
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: Intermediate, Standard
• Temp comp: Advanced dual-slope
• Alarm relay: Form A
• Input voltage: 7.5-16VDC
• Standby current: 25mA typical
• Indicators: Tri-color LED
• Operating temp: 14°F to 131°F
• Dimensions: 4.685”H x 2.795”W
x 1.654”D
7
IN04004 Sensor_Guide.qxd 7/19/05 12:35 PM Page 18

DUAL TEC
®
Motion Sensors
8
DT-7450
DUAL TEC®Motion Sensor
“Commercial protection
that incorporates the latest
processing technology.”
Accessories
• Swivel Bracket - SMB10
• Ceiling Bracket - SMB10C
• Tampered Swivel Bracket - SMB10T
Features
• Exclusive K-Band microwave
technology
• DualCore micro-based processing
• Concurrent diagnostics
• Digital microwave adaptive threshholds
• Digital fluorescent light filter
• Uniform Sensitivity Optics
• Zero Clearance black bug guard
• Tamper
• Also available with Form C
as DT-7450C
Specifications:
• Range: 50’ x 60’
• Microwave Freq: K-Band, 24.125GHz
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: Intermediate, Standard
• Temp comp: Advanced dual-slope
• Alarm relay: Form A
• Input voltage: 7.5-16VDC
• Standby current: 25mA typical
• Indicators: Tri-Color LED
• Operating temp: 14°F to 131°F
• Dimensions: 4.685”H x 2.795”W x
1.654”D
DT-7550C
DUAL TEC®
with Anti-Mask
“Opens new high
security opportunities.”
Features
• Includes all features of the DT-7450, plus
• MaskAlert processing
• Form C relay
• Trouble output relay
• No rear pattern leakage
• K-Band
• Microprocessor controlled dual slope
temperature comp.
Accessories
• Swivel Bracket - SMB10
• Ceiling Bracket - SMB10C
• Tampered Swivel Bracket - SMB10T
Specifications:
• Range: 50’ x 60’
• Microwave Freq: K-Band, 24.125GHz
• Detectable walk rate: 0.5’ - 10’/sec
• Signal Proc.: Intermediate, Standard
• Temp comp: Advanced dual-slope
• Alarm relay: Form C
• Trouble Relay: Form B
• Input voltage: 7.5-16VDC
• Standby current: 30mA typical
• Indicators: Tri-Color LED
• Operating temp: 14°F to 131°F
• Dimensions: 4.685”H x 2.795”W x
1.654”D
IN04004 Sensor_Guide.qxd 7/19/05 12:37 PM Page 19

DUAL TEC
®
Motion Sensors
9
DT-515
MiniTek™
Motion Sensor
“Economic alternative to a
DUAL TEC®that’s more than
just a PIR.”
Features
• ASIC-based PIR with S-Band
microwave
• Versatile mounting options
• Wall, corner or ceiling mount
• Surface or flush mount
• Totally silent relay
• Selectable pulse processing
Specifications:
• Range: 15’ x 15’ or 360° x 15’
• Microwave Freq: S-Band, 2.45GHz
• Detectable walk rate: 0.5’ - 5’/sec
• Signal Proc.: Intermediate, Std, Harsh
• Temp comp: Advanced dual-slope
• Alarm relay: Form A
• Input voltage: 10-14.5VDC
• Standby current: 20mA
• Indicators: Red LED
• Operating temp: 14°F to 122°F
• Dimensions: 4.25”H x 2.125”W
x 1.25”D
DT-7360
Ceiling Mount
DUAL TEC®
“K-Band technology is now
available in a ceiling mount
sensor.”
Features
• Exclusive K-Band microwave
technology
• DualCore micro-based processing
• Concurrent Diagnostics
• Digital microwave adaptive thresholds
• Digital fluorescent light filter
• Trouble output
• Surface mount or flush mount
• Front and rear tamper switches
Specifications:
• Range: 50’ diameter 360° coverage
• Microwave Freq: K-Band, 24.125GHz
• Detectable walk rate: 0.5’ - 5’/sec
• Signal Proc.: Intermediate, Standard
• Temp comp: Advanced dual-slope
• Alarm relay: Form C
• Input voltage: 7.5-16VDC
• Standby current: 30mA typical
• Indicators: Separate red, green,
yellow LEDs
• Operating temp: 14°F to 131°F
• Dimensions: 5.0”H x 5.0”W x 2.5”D
NEW!
IN04004 Sensor_Guide.qxd 7/19/05 12:38 PM Page 22