Honeywell T7350H User guide

Application Selection and
Cross-Reference Guide
Commercial Thermostats
GET CONTROL. GET HONEYWELL.
WEBSTAT™ CONTROLLER T7350 T7351F COMMERCIAL VISIONPRO 8000®COMMERCIALPRO®7000 ZONEPRO®FAN COIL LINE VOLT PNEUMATIC

For more than a century, Honeywell has been on the
leading edge of product development for energy-efficient
HVAC and building automation products. Contractors and
building owners count on Honeywell commercial thermostats
for the latest technology, ease-of-use and energy savings.
Support
Commercial Thermostats Hotline
1-763-954-6464
Web Site
customer.honeywell.com
New Product Information
customer.honeywell.com/buildings
Contractor PRO™Program
www.contractorpro.com
Technical and Sales Literature
customer.honeywell.com
For more information, please contact your local Honeywell
authorized distributor or Honeywell sales representative.
The Innovative Leader
2

WebStat™ Controller
Web Accessible Thermostats
• Honeywell’s WebStat™system is composed of the
world-class T7350H LonWorks®communicating
thermostats combined with a single WebStat
controller which enables your network of T7350H
thermostats to be configured and monitored
from any computer with internet access from
anywhere in the world.
Features
• Configure/commission/monitor through
the same easy-to-use Web-based interface
• Free job estimating and submittal tools that provide
everything from wiring diagrams to guide specs
• Data trending for use in troubleshooting
• Customizable floor plan layouts
3
OS Number Description Application
W7350A1000 WebStat Controller with LonWorks®
Loncard and Power Supply Web-Based Network Controller
T7350H1009
Communicating Commercial
Programmable Thermostat
T735H1009: 3 Heat/3 Cool or 2 Heat/4 Cool
Conventional or 3 Heat/2 Cool Heat Pump
T7350H1017: Two 4-20 mA Outputs
for Modulating Applications
T7350H1017
WebStat Features and Benefits Summary
Low Installed
Cost
Low Operating
& Service Cost Ease of Use Advanced Comfort
Embedded Software • •
Integrated Graphic, Config
and Commissioning Tool •••
Wizard Programming Tool •••
Device Self Discovery •
Field Wiring & Sensor Avg. Diagrams • •
Thin Client Web Remote Monitoring ••••
Trending, Troubleshooting • •
Floor Plan Locator •
Remote Programming ••••
Multi-User Access View • •
User Privilege Setup •••
Advanced Dehumidification •
Special Event, Holiday Scheduling • (E)
Override Controls • (E)
Thermostat Assignment • (E)
Advanced Remote Sensing •
E=Energy Savings

T7350H
Communicating Thermostat
• Communication via LonWorks®Network
– Remote access for diagnostics
• Integrated humidity sensor
– Several strategies for dehumidifying
• 365-Day Schedule
– Schedule holidays throughout the year
to save energy
• Remote sensing
– Indoor, outdoor, humidity, occupancy and
discharge air sensors available for added flexibility
– Outdoor Air and Discharge Air Temperature Lockout
• Controls up to 3H/3C or 2H/4C conventional
systems or 3H/2C heat pumps (T7350H1009)
– Flexibility allows the same thermostat to be
used on every RTU in the system
• Has two 4-20 modulating outputs for controlling
heating and cooling valves (T7350H1017)
– Allows thermostat to be used in hydronic
heating or cooling applications
– Control of staged and modulating hybrid systems
OS Number Description Application
T7350H1009
Communicating Commercial
Programmable Thermostat
T735H1009: 3 Heat/3 Cool or 2 Heat/4 Cool
Conventional or 3 Heat/2 Cool Heat Pump
T7350H1017: Two 4-20 mA Outputs
for Modulating Applications
T7350H1017
Replacements Sensor
Capabilities
Honeywell
White-Rodgers
Invensys/
Robertshaw
Carrier/Totaline
TCS/Basys
Controls
Communicating
T7350H1009
All T7300s
with Q7300H
Subbases
No
Equivalent
Offering
No
Equivalent
Offering
No
Equivalent
Offering
SZ1022,
SZ1024,
SZ1031,
SZ1033,
SZ1035,
SZ1009
T7771A1005,
T7770A1006,
T7770A3002
(averaging),
T7770B1004,
T7770C1002,
T7770D1000,
T7772A1004
(wall plate),
C7770A1006
(return
airduct),
C7041P2004
(button sensor)
T7350H1017 No Previous
Offering
No
Equivalent
Offering
No
Equivalent
Offering
No
Equivalent
Offering
SZ1017a,
SZ1053
Compatible With These Honeywell Systems
LCBS
LonSpec™/LonStation™XL15B W7760B2001
WEBsAX™
T7350 Wizard
WebStat™
W7350A1000
4

Replacements Sensor
Capabilities
Honeywell
White-Rodgers
Invensys/
Robertshaw
Carrier/Totaline
TCS/Basys
Controls
Communicating
T7350H1009
All T7300s
with Q7300H
Subbases
No
Equivalent
Offering
No
Equivalent
Offering
No
Equivalent
Offering
SZ1022,
SZ1024,
SZ1031,
SZ1033,
SZ1035,
SZ1009
T7771A1005,
T7770A1006,
T7770A3002
(averaging),
T7770B1004,
T7770C1002,
T7770D1000,
T7772A1004
(wall plate),
C7770A1006
(return
airduct),
C7041P2004
(button sensor)
T7350H1017 No Previous
Offering
No
Equivalent
Offering
No
Equivalent
Offering
No
Equivalent
Offering
SZ1017a,
SZ1053
T7350M
Modulating and Staged Thermostat
• Integrated humidity sensor
– Several strategies for dehumidifying
• 365-Day Schedule
– Schedule holidays throughout the year to
save energy
• Remote sensing
– Indoor, outdoor, humidity, occupancy
and discharge air sensors available for
added flexibility
– Outdoor Air and Discharge Air Temperature Lockout.
• Has two 4-20 modulating outputs for controlling
heating and cooling valves
– Allows thermostat to be used in hydronic
heating or cooling applications
• Control of staged and modulating hybrid systems
• PID loop
– First thermostat with configurable PID loop
OS Number Description Application
T7350M1008 Modulating Commercial
Programmable Thermostat
– Two 4-20 mA Outputs for Modulating Applications
– Two Relays for Staged Control
– Advanced Dehumidification
Replacements Sensor
Compatibility
Honeywell
White-Rodgers
Invensys/
Robertshaw
Carrier/Totaline
TBS/Basys Controls
Modulating
T7350M1008 No Previous
Offering
No
Equivalent
Offering
No
Equivalent
Offering
No
Equivalent
Offering
SZ1017a,
SZ1053
T7771A1005,
T7770A1006,
T7770A3002
(averaging),
T7770B1004,
T7770C1002,
T7770D1000,
T7772A1004
(wall plate),
C7770A1006
(return
airduct),
C7041P2004
(button sensor)
5

T7350A, B, D
Standalone Staged Thermostat
• Integrated humidity sensor (T7350D)
– Several strategies for dehumidifying
• 365-Day Schedule
– Schedule holidays throughout the year
to save energy
• Remote sensing (T7350B, D)
– Indoor, outdoor, humidity, occupancy and discharge
air sensors available for added flexibility
– Outdoor Air and Discharge Air Temperature Lockout
• Controls conventional or heat pump systems
• Flexibility allows the same thermostat to be
used on every top roof unit in the system
• PID loop
– First thermostat with configurable PID loop
OS Number Description Application
T7350A1004
T7350 Commercial
Programmable Thermostat
T7350A1004: 1 Heat/2 Cool and 2 Heat/1 Cool
Conventional, 2 Heat/1 Cool Heat Pump
T7350B1002 T7350B1002: 3 Heat/2 Cool and 2 Heat/3 Cool
Conventional, 3 Heat/2 Cool Heat Pump
T7350D1008
T7350D1008: 3 Heat/3 Cool and 2 Heat/4 Cool
Conventional, or 3 Heat/2 Cool Heat Pump with
2 Auxiliary Stages, Advanced Dehumidification
and Occupancy Option
Replacements Sensor
Compatibility
Honeywell
White-Rodgers
Invensys/
Robertshaw
Carrier/Totaline
TCS/basys Controls
Conventional/Heat Pump
T7350A1004
All T7300s
with
Q7300A2008
Subbase
1-F90-371,
1-F97-371,
1-F96-344,
1-F90-374,
1-F97-374
9700i, 9701i SZ1009
T7350B1002
All T7300s
with Q7300A
and Q3700C
Subbases
All
White-Rodgers
Thermostats
9700i Series,
300 Series
All Carrier/
Totaline
Thermostats
Sz1022,
SZ1024,
SZ1031,
SZ1033,
SZ1009
T7771A1005,
T7770A1006,
T7770A3002
(averaging),
T7770B1004,
T7770C1002,
T7770D1000,
T7772A1004
(wall plate),
C7770A1006
(return
airduct),
T7350D1008
All T7300s
with
Non-Q7300H
Subbases
All
White-Rodgers
Thermostats
All Invensys/
Robertshaw
Thermostats
All Carrier/
Totaline
Thermostats
SZ1022,
SZ1024,
SZ1031,
SZ1033,
SZ1035,
SZ1009
6

Replacements Sensor
Compatibility
Honeywell
White-Rodgers
Invensys/
Robertshaw
Carrier/Totaline
TCS/basys Controls
Conventional/Heat Pump
T7350A1004
All T7300s
with
Q7300A2008
Subbase
1-F90-371,
1-F97-371,
1-F96-344,
1-F90-374,
1-F97-374
9700i, 9701i SZ1009
T7350B1002
All T7300s
with Q7300A
and Q3700C
Subbases
All
White-Rodgers
Thermostats
9700i Series,
300 Series
All Carrier/
Totaline
Thermostats
Sz1022,
SZ1024,
SZ1031,
SZ1033,
SZ1009
T7771A1005,
T7770A1006,
T7770A3002
(averaging),
T7770B1004,
T7770C1002,
T7770D1000,
T7772A1004
(wall plate),
C7770A1006
(return
airduct),
T7350D1008
All T7300s
with
Non-Q7300H
Subbases
All
White-Rodgers
Thermostats
All Invensys/
Robertshaw
Thermostats
All Carrier/
Totaline
Thermostats
SZ1022,
SZ1024,
SZ1031,
SZ1033,
SZ1035,
SZ1009
7
T7351F
Standalone Staged Thermostat
• Keypad programming
– All configuration is done through the keypad
• Integrated humidity sensor
– Several strategies for dehumidifying
• 365-Day Schedule
– Schedule holidays throughout the year
to save energy
• Remote sensing
– Indoor, outdoor, humidity, occupancy and discharge
air sensors available for added flexibility
– Outdoor Air and Discharge Air Temperature Lockout
• Controls conventional or heat pump systems
• Flexibility allows the same thermostat to be
used on every top roof unit in the system
OS Number Description Application
T7351F2010 T7351 Commercial
Programmable Thermostat
T7350D1008: 3 Heat/3 Cool and 2 Heat/4 Cool
Conventional, or 3 Heat/2 Cool Heat Pump with
2 Auxiliary Stages, Advanced Dehumidification
and Occupancy Option
Replacements Sensor
Compatibility
Honeywell
White-Rodgers
Invensys/
Robertshaw
Carrier/Totaline
TCS/basys Controls
Conventional/Heat Pump
T7351F2010
All T7300s
with
Non-Q7300H
Subbases
All
White-Rodgers
Thermostats
All Invensys/
Robertshaw
Thermostats
All Carrier/
Totaline
Thermostats
SZ1022,
SZ1024,
SZ1031,
SZ1033,
SZ1035,
SZ1009
T7771A1005,
T7770A1006,
T7770A3002
(averaging),
T7770B1004,
T7770C1002,
T7770D1000,
T7772A1004
(wall plate),
C7770A1006
(return
airduct),
C7041P2004
(button sensor)

Schools
• Up to 10 holidays can be scheduled into the Holiday
Scheduler, which can be programmed to handle multiple
days per holiday event, can program closed days
during the summer or spring break and can be
programmed for specific calendar events. (All Models)
• Dehumidification features can be used to control
dew points in buildings and can be deployed where
moisture is an issue, such as around school pools or
in humid locations. (T7350D, M, H and T7351F)
• Temporary Override can be configured from 1 to 8 hours
to allow override from unoccupied schedule to an
occupied schedule as well as for classrooms that are
only used for parts of the week or just occasionally used.
(All Models)
• PID Algorithm is the best control algorithm available
that can heat and cool large spaces, such as
gymnasiums or auditoriums, quickly and accurately.
The PID Algorithm is specifically tuned for oversized
equipment and has a short sensor time constant that
can react quickly to demand changes. (All T7350 Models)
Banks
• Easy-to-use Holiday Scheduler. (T7350B, D, M, H
and T7351F)
• T7350 Palm®Software comes pre-configured with
all bank holidays for easy programming into the
thermostat. (All T7350 Models)
Healthcare and Gym Facilities
• Solid solution for rooftop units on facilities that demand
very accurate temperature and enthalpy control.
The PID Algorithm will maintain the most accurate
temperature control in the facility. (All T7350 Models)
• Dehumidification features are ideal for controlling
high-moisture areas. (T7350D, M, H and T7351F)
Restaurant/Food Service
• PID Commercial Algorithm provides the best
comfort control to react to the constantly changing
food service and restaurant environments, reacting
quickly to changing load demands via fast-sensing
time constants. (All T7350 Models)
• Remote Sensing configuration options allow the use of
commercial 20K ohm and 10K ohm sensors to create
a 20K ohm averaging network, a good solution for food
service locations that have high load demands.
(T7350B, D, M, H and T7351F)
• Economizer function allows restaurants to meet
ventilation requirements and is also important to
balance the air intake of the restaurant. Restaurants that
are not properly balanced do not achieve good comfort
control as they draw in unconditioned air. (All Models)
Churches/Public Worship
• PID Algorithm is the best control algorithm available that
can heat and cool large spaces, such as sanctuaries
and fellowship rooms, quickly and accurately. The PID
Algorithm is specifically tuned for oversized equipment
and has a short sensor time constant that can react
quickly to demand changes. (All T7350 Models)
• T7350 Wall Modules, including the T7771 and T7770B,
C and D models, allow for setpoint-only adjustment with
range stops, temporary override control or a combination
of both to provide the end-users with flexibility to provide
optimal comfort during occupied events. (T7350B, D,
M, H and T7351F)
Retail
• Customizable Recovery Ramp feature guarantees
the exact temperature specified when the store opens,
ensuring customer and staff comfort. (All Models)
• Easy-to-use Holiday Scheduler. (All Models)
• For energy management, the T7350 Demand Limit
Bump and Demand Limit Control can be programmed with
communicating versions of the T7350 to provide energy
savings when rooftop units can be staggered to control
energy costs during peak periods. (T7350H)
T7350/T7351F Applications
8

T7350/T7351F Applications
Office Building Zones
• The T7350 is the only Honeywell thermostat that integrates
with occupancy sensors for office zones that are
normally unoccupied or partially occupied. (T7350D,
M, H and T7351F)
• T7350 Wall Modules, including the T7771 and T7770B,
C and D models, allow for setpoint-only adjustment with
range stops, temporary override control or a combination
of both to provide the end-users with flexibility to provide
optimal comfort during occupied events. (T7350B, D,
M, H and T7351F)
• Customizable Recovery Ramp feature guarantees the
exact temperature specified when the office opens.
(All Models)
Heat Pumps
• Outdoor Air Sensor automatically turns off heat pump
equipment in cold climates. The T7350 is the only
Honeywell thermostat that uses both an outdoor air
sensor and indoor sensors/wall modules for heat pump
control applications. (T7350B, D, H and T7351F)
Equipment Protection
• Discharge Air Sensor detects abnormally high or low dis-
charge air temperatures and shuts down equipment
if limits are exceeded. (T7350B, D, M, H and T7351F)
Modulating Control —
Discharge Air Control
• By tuning the PID loop, optimal control can be achieved.
20K ohm duct sensors can be used in the wall module ter-
minals for temperature sensing. The modulating output will
control the damper position. (T7350M, H)
Modulating Control –
Hydronic Boilers and Pumps
• Combine modulating control and on/off relay control.
The modulating output can control modulating actuator
valves during the heating season and up to 2-stage
conventional cooling during the cooling season. (T7350M, H)
• Ideal for split systems that have separate heating and
cooling equipment and need both a modulating output
and a conventional output. The fan relay can be config-
ured for either conventional (plenum switch controls fan)
or electric (thermostat energized fan on call for heat)
applications. (T7350M, H)
• Various hydronic control applications are possible,
including unit ventilators, fan coils or any other modulat-
ing system. The modulating outputs support both direct
and reverse acting signals. (T7350M, H)
Communicating Control
• Using the Honeywell Command Display S7760A, the
Honeywell LonStation™front-end or the Honeywell XL15B
Web Building Manager, a single user interface can be
accessed to perform the following functions: (T7350H)
– Group Scheduling
– Group Override/Setback
– Trending (not supported with command display)
– Alarming (not supported with command display)
– Demand Limit Control (XL15B only)
– LonSpec™Configuration PC Tool
– Web-Based Control (XL15B only)
– Dial-Up Control (LonStation only)
Web-Based Interface
• Using Honeywell’s WebStat™Controller in conjunction
with the T7350H communicating thermostats allows for
a single user interface to be used during system setup,
commissioning, monitoring and troubleshooting. With the
WebStat Controller, the following functions are enabled:
– Group Scheduling
– Group Override-Setback
– Trending
– Alarming
– Custom Graphics
and Floorplans
OS Number Benefit
T7350A1004 Energy Savings, Comfort, Fresh Air
T7350B1002 Energy Savings, Comfort, Fresh Air
T7350D1008 Energy Savings, Comfort, Fresh Air,
Dehumidification
T7351F2010 Energy Savings, Comfort, Fresh Air,
Dehumidification
T7350M1008 Energy Savings, Comfort, Fresh Air,
Dehumidification, Modulating
T7350H1009 Energy Savings, Comfort, Fresh Air,
Dehumidification, Communicating
T7350H1017 Energy Savings, Comfort, Fresh Air,
Dehumidification, Modulating, Communicating
9

Commercial
VisionPRO®8000
Programmable Touchscreen Thermostat
• Touchscreen user interface
– The sleek design, menu-driven programming
and large touchscreen display are all here
• Saves energy
– Effortless programming helps your customers
save up to 33% off their energy bill1
• Meets commercial building codes
– Pre-occupancy Purge, Economizer Output and
Override Limits meet all fresh air and override
limitation requirements
– Qualifies for utility rebates2
– Title 24/IECC/ASHRAE codes
• Multiple lockout levels
– Save energy and money by preventing
unauthorized setting changes
• Compatible with auxiliary commercial devices
– Commercial sensors
– Economizers
• Commercial comfort
– Commercial Algorithm, configurable recovery ramps
and temporary overide button allow users to control
at setpoint and guarantee a comfortable environment
1If used as directed. Savings may vary depending on geographic
region and usage.
2Where applicable.
OS Number Description Application
TB8220U1003 Commercial VisionPRO®8000
Programmable Thermostat
– 2 Heat/2 Cool Conventional
– 3 Heat/2 Cool Heat Pump
Replacements Sensor
Compatibility
Honeywell
White-rodgers
Invensys/
Robertshaw
Carrier/Totaline
Commercial
VisionPRO®8000
TB8220U1003
T7300 with
Q7300A2016,
Q7300A2008,
Q7300C2004
and
Q7300C2012
Subbase
IF90 Series,
IF80 Series
9800 Series,
9700i Series,
300 Series
P374-2100,
P374-2200,
P374-2300,
33S250-01,
33CS220-01,
33CS071-01,
33CSSP2-WC,
33CSSN2-WC
T7770A1006,
T7770A3002
(averaging),
C7772A1004
(wall plate),
C7770A1006
(return air
duct),
C7041P2004
(button sensor)
10

OS Number Description Application
TB7220U1012 CommercialPRO®7000
Programmable Thermostat
– 2 Heat/2 Cool Conventional
– 3 Heat/2 Cool Heat Pump
Replacements Sensor
Compatibility
Honeywell
White-rodgers
Invensys/
Robertshaw
Carrier/Totaline
CommercialPRO®7000
TB7220U1012
T7300 with
Q7300A2016,
Q7300A2008,
Q7300C2004
and
Q7300C2012
IF90 Series,
IF80 Series
9800 Series,
9700i Series,
300 Series
P374-2100,
P374-2200,
P374-2300,
33S250-01,
33CS220-01,
33CS071-01,
33CSSP2-WC,
33CSSN2-WC
T7770A1006,
T7770A3002
(averaging),
C7772A1004
(wall plate),
C7770A1006
(return air
duct),
C7041P2004
(button sensor)
CommercialPRO®7000
Thermostat
• Large, easy-to-read display
– Screen size is more than double competitive
thermostats in this class, allowing for more
information to be displayed on the easy-to-view
backlit display
• Saves energy
– Easy-to-use, menu-driven programming helps
your customers save up to 33% off energy bills1
• Meets commercial building codes
– Pre-occupancy Purge, Economizer Output, and
Override Limits meet all fresh air and override
limitation requirements
– Qualifies for utility rebates2
– Title 24/IECC/ASHRAE code
• Multiple lockout levels
– Save energy and money by preventing
unauthorized setting changes
• Compatible with auxiliary commercial devices
– Commercial sensors
– Economizers
• Commercial comfort
– Commercial Algorithm, configurable recovery ramps
and temporary overide button allow users to control
at setpoint and guarantee a comfortable environment
1If used as directed. Savings may vary depending on geographic
region and usage.
2Where applicable.
11

After-Hours Control in Office Buildings
• The Override button can be configured for a length of
time (1, 2, 3, 4 hours) and can be configured for an exact
override setpoint through the use of the lockout level
set-up and the temperature range stop setup. A user may
override to an exact setpoint or be given a setpoint range
to choose from.
• Provides comfort during after-hours occupancy while
maintaining energy savings after the tenant leaves
the building.
Schools – Individual Zone Control
• Cancel Period button allows thermostat to remain in
permanent unoccupied mode to provide energy savings
for school classrooms not being used.
• Teachers wanting to use a classroom press the Override
button and the thermostat enters the occupied period
providing the necessary comfort.
• The Override button can be configured for a length of
time (1, 2, 3, 4 hours) and can be configured for an exact
override setpoint through the use of the lockout level setup
and the temperature range stop setup. A user may over-
ride to an exact setpoint or be given a setpoint range to
choose from.
• During long holidays or during summer vacation, the
thermostat can be programmed with the Holiday button to
provide the greatest amount of energy savings.
Restaurant/Food Service Control
• Honeywell’s Commercial Algorithm provides the best
comfort control to react to the challenging environments
of food service and restaurant environments. The com-
mercial algorithm is tuned to provide the tightest comfort
control and react quickly to changing load demands via
fast-sensing time constants.
• Economizer function allows restaurants to meet the
appropriate ventilation requirements and is also important
to balance the air intake of the restaurant. Restaurants
that are not properly balanced do not achieve good
comfort control as they draw in unconditioned air.
• Remote sensing configuration options allow the use of
commercial 10K ohm and 20K ohm sensors to provide
any remote sensing combination (1 to 9+ sensors) to
create an averaging network.
Economizer Integration
• Compatible with Honeywell Economizer controllers, which
generate free cooling if appropriate outside air and/or
humidity conditions exist.
• Thermostats are integrated with economizers to maintain
minimum ventilation requirements of the building during
occupied periods. During unoccupied periods, ther-
mostats can override the economizer to fully close the
damper, thereby eliminating air infiltration into the building
to maximize energy savings.
Commercial VisionPRO®8000 And Commerical PRO®7000 Applications
OS Number Benefit
TB8220U1003 Energy Savings, Comfort, Fresh Air
TB7220U1012 Energy Savings, Comfort, Fresh Air
12

Commercial VisionPRO®8000 And Commerical PRO®7000 Applications
Remote Sensing
Can be configured using Honeywell’s line of 10K ohm and
20K ohm commercial sensors, supporting the following appli-
cations that residential thermostats don’t:
• Temperature Averaging Networks
Because commercial thermostats can be configured
to a 20K ohm network, temperature average networks
of anywhere from 1 to 9+ sensors can be deployed.
Combinations of 10K ohm and 20K ohm sensors are
use to create the averaging network. The most popular
sensors are the T7770A3002 10K sensor and the
T7770A1006 20K sensor.
• Room Temperature Control
Performed via a sensing network using the following
sensors:
– Wall Sensors: T7770A3002 (10K), T7770A1006
(20K), C7189U1005 (10K)
– Flush Mount Sensors: C7772A1004/C7772A1012
(20K)
– Button Sensors: C7041P (20K)
• Duct Return Temperature Control
Performed using the following 20K sensors:
C7041B/C7041C/C7770A/C7041J
Unit Vent
• Can be programmed to control ASHRAE Cycle 1 unit vent
applications.
• Unit vent outside-air damper can be programmed through
the Economizer feature. When the unit vent is on and
occupied, the thermostat will enable the economizer
relay to keep the outside air damper at the maximum
percentage opening. Only maximum percentage
opening is available; the thermostat will not modulate
the damper. When the unit vent is unoccupied, the
thermostat will close the damper.
• Range Stop feature can be configured to program a low
limit setpoint to prevent equipment damage from freezing.
Commercial Codes
• Comply with commercial building codes and meet the most
rigorous standard, California’s Title 24.
• No hold button is available, so the thermostat remains
in permanent schedule.
• Override button allows the tenant to override an unoccu-
pied mode for up to 4 hours and can be configured for an
exact override setpoint. Depending on the partial lockout
level deployed, a user may override to an exact setpoint or
be given a setpoint range to choose from.
• Pre-Occupancy Purge and Economizer functions allow the
building owner to meet all HVAC ventilation codes for com-
mercial buildings.
Lighting Load Reduction (TOD)
• Commercial buildings are frequently automated to turn off
lighting loads. Lighting loads can use even more energy
than HVAC systems in commercial buildings, and 79%
of commercial buildings have off-hours lighting load
reduction control. By using the time-of-day relay (TOD)
in conjunction with a lighting control system, users can
automate their lighting loads.
T7770A3002
T7770A1006
T7770A1006
SUBBASE
THE T7770A3002 IS A 10K OHM SENSOR
13

I/R TIM
• Eliminates hard-to-find cables that connect a Palm®
to the thermostat interface module.
• T7350 thermostat programming can be done on
the Palm and communicated via infrared to the I/R
TIM, which automatically transmits it to the T7350.
Simply download the T7350 program software at
customer.honeywell.com onto the Palm. Once the
T7350 is configured on the Palm, it can be beamed
via the infrared port to the I/R TIM.
• Most newer Palms are compatible.
• Programs can be saved on the Palm and beamed
again and again to other T7350s, saving time.
• Users can capitalize on more T7350 features that are
only accessible by using a Palm, including:
– 365-day holiday programming
– Configurable ramp rates
– Configurable PID loop tuning
– Configurable standby setpoints
– Configurable outdoor air temp lockout
– Configurable high and low discharge air limits
– Configurable dehumidification parameters
OS #: 50014064-001
Remote Room Temperature and
Discharge Air Sensors
• Full line of remote wall sensors.
• Gives user the option to have setpoint knobs/buttons,
override button or sensor only.
• Flush mount versions are available for high traffic
areas where protruding objects would get broken.
T7770A1006 — 20K Sensor only
T7770A3002 — 10K Averaging sensor
T7770B1046 — 20K Sensor with setpoint knob
T7770C1044 — 20K Sensor with setpoint knob
and override button
T7770D1000 — 20K Sensor with override button
T7771A1005 — 20K or 10K Sensor with setpoint
buttons and override button
C7772A1012 — 20K Flush mount sensor
C7041B2005 — 20K Discharge air sensor, 6" probe
C7041B2013 — 20K Discharge air sensor, 12" probe
Humidity Sensors
• Available in wall- or duct-mount applications.
– Allows for monitoring humidity via a wall sensor
or within the return air duct
• Available in different accuracies.
• 2%, 3% or 5% accuracy models for applications
requiring different levels of accuracy.
H7625A1008 — 2% RH accuracy wall-mount humidity
sensor with 20K room sensor
H7625B1006 — 2% RH accuracy duct-mount humidity
sensor with 20K room sensor
H7635A1006 — 3% RH accuracy wall-mount humidity
sensor with 20K room sensor
H7635B1004 — 3% RH accuracy duct-mount humidity
sensor with 20K room sensor
H7655A1001 — 5% RH accuracy wall-mount
humidity sensor
H7655B1009 — 5% RH accuracy duct-mount humidity
sensor with 20K room sensor
Accessories
14

15
Remote Room Sensors
T7770A1006 20K Sensor
T7770A3002 10K Sensor for Averaging
T7770B1046 20K Sensor with +/- 5oSetpoint Adjust
T7770C1044 20K Sensor with +/- 5oSetpoint Adjust and Bypass
T7770D1000 20K Sensor with Bypass
T7771A1005 20K Sensor with +/- 3oSetpoint Adjust and Bypass
Remote Humidity Sensors
H7625A1008 2% Accuracy Wall Mount
H7625B1006 2% Accuracy Duct Mount
H7635A1006 3% Accuracy Wall Mount
H7635B1004 3% Accuracy Duct Mount
H7635C1002 3% Accuracy Outdoor
H7655A1001 5% Accuracy Wall Mount
H7655B1009 5% Accuracy Duct Mount
Discharge Air Sensors
C7041B2005 20K Discharge Air Sensor, 5" Duct Insertion
C7041B2013 20K Discharge Air Sensor, 12" Duct Insertion
Outdoor Air Sensors
C7031G2014 3K Platinum Outdoor Air Sensor
C7170A1002 3K Platinum Outdoor Air Sensor
T7771A1005
Remote Wall
Senor
T7770C1044
Remote Wall
Senor
C7031G2014
3K Platinum
Outdoor Air
Senor
Economizer
Economizers Compatible with the T7351F
Honeywell has a range of economizer controls that are compatible with the T7351F and
other Honeywell commercial thermostats. These economizers save energy by bringing in
cool outdoor air when there is a need for cooling and some models also adjust outdoor
damper position based on indoor air quality (CO2) for demand control ventilation.
• W7459, W7210 (economizer only)
• W7212, W7213, W7214 (economizer and Demand Control Ventilation)
The Demand Control Ventilation economizers listed above have the latest features,
including indoor air quality maximum output, night setback terminal and they drive a
2– to 10–volt motor.
Remote Sensors Compatible with theT7351F
Honeywell has a full line of remote sensors that are compatible with the T7351F.

16
ZonePRO®
Commercial Modulating Zoning Thermostat
• Good looks
– Many thermostats used for this application look
very outdated
• Price
– Very cost-effective alternative to an expensive
networked zoning system
• Flexibility
– Has more features and fits more applications
than other thermostats in this market (setback
input, additional analog and triac output on
the B models)
– Duct sensor and remote sensor capabilities
are standard, allowing flexibility to do room
temperature sensing, discharge air control,
sensor averaging
• Easy to install
– Easy to wire
– Easy to program the configuration code
– Power output graph helps the installer
understand if the actuator is operating properly
• Saves energy
– Override button and night setback
– Range stop temperature limits
– System control modes such as fresh air control
and limited cooling modes
Schedule Options User
Interface Output Type Universal
Applications
Power
Method Features and Functions Compatible Actuators
Compatible
Valves
Sensors and
Accessories Replaces
Program Options
Temporary Override
Modulating and Floating
Permanent Memory Retention
Night Setback
Range Stops
Power Output Graph
Remote Sensing
On-Demand Backlighting
TB6980A1007
Non-
Programmable
with Night
Setback Input
Yes Digital
Floating,
Single Output
Auto
Changeover,
Discharge
Air
Temperature,
Return
Air
Temperature,
Room
Temperature,
Limited
Cooling
24 VAC Yes Yes Yes Yes
Yes
(indoor,
outdoor,
supply)
Yes
ML6984A1006,
ML6420,
ML6161B2024,
MN6105A1011
VC6930,
VC6934,
VC6936,
M6410,
M6435
R841 Series of
electrome-
chanical relays,
50014157-001
air duct sensor,
50014156-002
space sensor,
ST6008A1003
and
ST7009A1003
time clocks,
209651A
wall plate,
D640 and D690
dampers
T6984A1059
TB6980B1006
Floating, Multi
Output (extra
analog and
digital output)
T6984D1046,
T6984E1043
TB7980A1006
Analog (0-10
V or 2-10 V),
Single Output ML7984A4009,
ML7420,
ML7161A2008,
MN7505A2001
VC7930,
VC7934,
VC7936,
M7410,
M7435
T7984A1057,
T7984A1065
TB7980B1005
Analog (0-10
V or 2-10 V),
Multi Outupt
(extra analog
and digital
output)
T7984B1055,
T7984C1053

Stand Alone VAV Pressure
Dependent (VVT Zoning) Control
• Typical building applications include zoning for office
buildings, airports, strip-malls and multi-tenant facilities
that have multiple terminal zones that run off of a single
air-handler.
• Thermostats provide modulating control (floating or
analog) for each zone.
• Can be configured for cool only, heat only or
auto changeover. Up to 2 re-heat outputs are available
if the discharge air from the air handler needs to be
heated at the zone. (B models)
• Remote sensors are compatible with all ZonePRO®
models if remote room sensing or return air
temperature sensing is desired.
• May also be used at the air handler to control the
temperature of the fresh air supply or provide limited
cooling using outdoor air when appropriate.
• All ZonePRO thermostats come with energy-saving
range stop and night setback configurability.
Hydronic Control &
Modulating Heating
• Can be used for modulating hydronic heating or
cooling applications.
• Other common applications include radiant panel
heaters, cabinet heaters, fin-tube radiators and other
electric or hydronic re-heat applications.
ZonePRO®Applications
Supply Air Temperature Sensor
Hot Water
Coil
Modulating Damper
Actuator
Electric Baseboard Heat
R841
Relay
TB7980B1005: Cooling Only Pressure Dependent VAV Zone Reheat and Electric Baseboard Heat
17
Schedule Options User
Interface Output Type Universal
Applications
Power
Method Features and Functions Compatible Actuators
Compatible
Valves
Sensors and
Accessories Replaces
Program Options
Temporary Override
Modulating and Floating
Permanent Memory Retention
Night Setback
Range Stops
Power Output Graph
Remote Sensing
On-Demand Backlighting
TB6980A1007
Non-
Programmable
with Night
Setback Input
Yes Digital
Floating,
Single Output
Auto
Changeover,
Discharge
Air
Temperature,
Return
Air
Temperature,
Room
Temperature,
Limited
Cooling
24 VAC Yes Yes Yes Yes
Yes
(indoor,
outdoor,
supply)
Yes
ML6984A1006,
ML6420,
ML6161B2024,
MN6105A1011
VC6930,
VC6934,
VC6936,
M6410,
M6435
R841 Series of
electrome-
chanical relays,
50014157-001
air duct sensor,
50014156-002
space sensor,
ST6008A1003
and
ST7009A1003
time clocks,
209651A
wall plate,
D640 and D690
dampers
T6984A1059
TB6980B1006
Floating, Multi
Output (extra
analog and
digital output)
T6984D1046,
T6984E1043
TB7980A1006
Analog (0-10
V or 2-10 V),
Single Output ML7984A4009,
ML7420,
ML7161A2008,
MN7505A2001
VC7930,
VC7934,
VC7936,
M7410,
M7435
T7984A1057,
T7984A1065
TB7980B1005
Analog (0-10
V or 2-10 V),
Multi Outupt
(extra analog
and digital
output)
T7984B1055,
T7984C1053

Other Thermostats
Line Volt
• Simple interface for control of line voltage heaters
– Easy for occupants to read and change setpoints
T651A3018 — Degree F scale, for heavy-duty line voltage heating systems
T651A3026 — Degree C scale, for heavy-duty line voltage heating systems
T451A3005 — Degree F scale, for light-duty line voltage heating systems
Pneumatic
• Large replacement market
– Large installed base, popular proven design for pneumatic systems
Go to customer.honeywell.com for a list
of all model numbers and accessories.
18
Digital Fan Coil
• Digital display
– Easy for occupants to read and change setpoints
T6575B1003 — 2/4 pipe 120 V fan coil thermostat with manual changeover
T6575C1001 — 2/4 pipe 120 V fan coil thermostat with automatic changeover
T6575D1009 — 2/4 pipe 120 V fan coil with auxiliary heat thermostat with
automatic changeover
T8575C2005 — 2/4 pipe 24 V fan coil thermostat with automatic changeover
T8575D2003 — 2/4 pipe 24 V fan coil thermostat with automatic changeover
and fan auto switch
Electromechanical Fan Coil
• Popular for the replacement market
– Large installed base, popular proven mechanical design
T4039B1008 — 2/4 pipe 24 V electromechanical fan coil thermostat
T4039M1004 — 2/4 pipe 24 V electromechanical fan coil thermostat with positive off
T4039M1103 — 2/4 pipe 24 V electromechanical fan coil thermostat with positive off
(white color) with automatic changeover and fan auto switch
T6169C4015 — 2 pipe fan coil, manual or auto changeover
T6169B4017 — 2 pipe fan coil, manual heat-cool changeover, no fan switching

AssociateYour Company Name
With The Honeywell Brand
• Give your customers the quality and reliability of a
Honeywell thermostat
• Let customers know who to call for future HVAC needs
• Up to three full lines of personalization — imprinted
directly on the thermostat cover
• Low minimum order quantities — starting at just 48 units
• No annual volume commitments
• Fastest turn-time in the industry — imprint approval in 5
days or less, all orders shipped in 10 days or less*
*Provided all program conditions are met.
Based on product availability.
Private Label Program
Program Details
MIN. ORDER QUANTITY ORDER PROCESS* IMPRINT FEE
Initial Orders 48 Units Through Web site customer.honeywell.com None
Re-Orders 24 Units Through Web site customer.honeywell.com None
Distributor Instructions
Before you begin creating a
private label, set up a unique
product part number(s) for your
customer in your system.
• The part number(s) that you
assign must be unique to each
customer and each product.
• Maximum of 18 characters per
distributor part number. Part
numbers must be upper case
with no spaces. (For example:
TB8220CLIMATRON).
• Do not use Honeywell part
number(s) for your customer
part numbers. We suggest
using a variation such as the
example above.
• You must use your distributor
part number when ordering
private label units.
Web Setup
Free setup on all orders placed through customer.honeywell.com
Log on to customer.honeywell.com using your Distributor Account Number and password* and
click on the “Private label Program” link in the right-hand column of the screen. Click on the
“Create New Label” link on the secondary menu bar at the top of the screen.
Step 1: Create a Label
• Select the font type.
• Type in your customer’s information exactly as they would like it to appear on their thermostats.
• Preview and submit your label when complete.
Step 2: Part Number Setup
• Select the Honeywell thermostat part numbers from the drop-down menu (the description will
automatically populate).
• Enter in your customer’s unique part number(s).
• Submit for approval and print a copy for your records.
• You will receive approval from Honeywell within 5 days of submittal that part number(s) have been
set up and product is available to order.
Step 3: Place Your Order
• Place an order (using your customer’s unique part number) after receiving both e-mail confirmations
from Honeywell that your label and part number(s) have been approved.
*Contact Honeywell customer care with any questions relating to logging on to customer.honeywell.com.
ALL PRIVATE LABEL ORDERS REQUIRE A MINIMUM INITIAL ORDER QUANTITY OF 48 UNITS. Mix/match is allowed to reach 48 minimum
initial order quantity, but must contain a minimum of 24 units per part number. Mix and match products include Commercial VisionPRO®, VisionPRO®,
CommercialPRO®, FocusPRO and PRO model families. Please refer to customer.honeywell.com for full OS numbers. Orders must be placed in
case quantities of 12. Re-order quantity is 24 units (must be the same part number). Private label orders are non-cancelable.
All private label orders will require a 10-day lead time — from the time submitted label artwork is approved and a purchase order is received from the Wholesaler/Distributor to the time the
private label product is hipped by Honeywell. All private labeled orders will be shipped directly to the Wholesaler/Distributor. Honeywell will not hold any inventory on private labeled product.
Any change in the label will be treated as a new label creation and the approval process must be followed in total. Coordination will be required for the transition, including purchasing existing
stock of customer parts. All private label requests must conform to the standards set by Honeywell. Honeywell reserves the right to deny any private label request as its own discretion.
Any inventory in the channel (in the factory in the warehouse or in transit) is the responsibility of the Wholesaler/Distributor. Honeywell will not be liable for any inventory in the channel.
By ordering private labeled products, you are agreeing to the terms stated in this program description. Honeywell reserves the right to change or cancel this program without notice.
Acme Heat & Cool
1-800-222-2222
[e-mail]
19

MODEL SCHEDULE OPTIONS USER
INTERFACE APPLICATION POWER METHOD FEATURES AND FUNCTIONS DISPLAY INFORMATION SENSOR COMPATIBILITY
Program Options
ENERGY STAR®
Temporary Override
Holiday
Conventional
Heat Pump
Modulating
Real-Time Clock
(Automatically Updates
Daylight Savings)
Permanent Memory
Retention
Recovery Ramps
LonWorks®
Communicating Capability
Economizer Output
Multiple Keypad
Lockout Levels
Dehumidification
Control
Remote Sensing
Display Size
(Viewable)
On-Demand Backlighting
Continuous Backlighting
Simultaneous Display
of Room and Set
Temperature
Communicating
T7350H1009 365-Day • •• Soft Keys
3 Heat /
3 Cool
or
2 Heat /
4 Cool
3 Heat /
2 Cool 24 VAC • • • • • 3 •
Indoor,
Outdoor,
Discharge,
Humidity,
Occupancy
4.2 sq. in. •
T7771A1005,
T7770A1006,
T7770A3002
(averaging),
T 7770B1004,
T7770C1002,
T7770D1000,
C7772A1004
(wall plate),
C7770A1006
(return airduct),
C7041P2004
(button sensor)
T7350H1017 365-Day • •• Soft Keys Two
4-20 mA 24 VAC • • • • • 3 •
Indoor,
Outdoor,
Discharge,
Humidity,
Occupancy
4.2 sq. in. •
Modulating T7350M1008 365-Day • •• Soft Keys Two
4-20 mA 24 VAC • • • • 3 •
Indoor,
Outdoor,
Discharge,
Humidity,
Occupancy
4.2 sq. in. •
Conventional/
Heat Pump
T7350D1008 365-Day • •• Soft Keys
3 Heat /
3 Cool
or
2 Heat /
4 Cool
3 Heat /
2 Cool 24 VAC • • • • 3 •
Indoor,
Outdoor,
Discharge,
Humidity,
Occupancy
4.2 sq. in. •
T7350B1002 365-Day • •• Soft Keys
3 Heat /
2 Cool
or
2 Heat /
3 Cool
3 Heat /
2 Cool 24 VAC • • • • 3
Indoor,
Outdoor,
Discharge
4.2 sq. in. •
T7350A1004 365-Day • •• Soft Keys
1 Heat /
2 Cool
or
2 Heat /
1 Cool
2 Heat /
1 Cool 24 VAC • • • • 3 4.2 sq. in. •
Conventional/
Heat Pump T7351F2010 365-Day • •• Soft Keys
3 Heat /
3 Cool
or
2 Heat /
4 Cool
3 Heat /
2 Cool 24 VAC • • • • 4 •
Indoor,
Outdoor,
Discharge,
Humidity,
Occupancy
4.2 sq. in. •
Commercial
VisionPRO®8000 TB8220U1003 7-Day • Cumulative • Touchscreen 2 Heat / 2 Cool
3 Heat /
2 Cool
24 VAC or
Battery • • • • 4 Indoor or Outdoor 10 sq. in. • • •
T7770A1006,
T7770A3002
(averaging),
C7772A1004
(wall plate),
C7770A1006
(return air duct),
C7041P2004
(button sensor)
CommercialPRO®7000 TB7220U1012 7-Day • Cumulative • Soft Keys 2 Heat /
2 Cool
3 Heat /
2 Cool
24 VAC or
Battery • • • • 4 Indoor or Outdoor 4 sq. in. • • •
T7770A1006,
T7770A3002
(averaging),
C7772A1004
(wall plate),
C7770A1006
(return air duct),
C7041P2004
(button sensor)
Honeywell Thermostat Cross-Reference Chart
20