HP f560x User manual

f560x
Car Camcorder
User Manual

1
Contents
Regulatory notices.....................................................................3
Prohibition of co-location ...........................................................3
WEEE Notice.............................................................................3
FCC .......................................................................................4
CE Regulatory Notice................................................................4
Notes on Installation..................................................................5
Caution......................................................................................5
1 Introduction........................................................................9
1.1 Features .........................................................................9
1.2 Package Contents...........................................................9
1.3 Product Overview..........................................................10
2 Getting Started .................................................................11
2.1 Storage Media...............................................................11
2.1.1 Insert the Memory Card......................................11
2.1.2 Remove the Memory Card..................................11
2.2 Installing in Vehicles......................................................12
2.2.1 Mount to Windshield...........................................12
2.2.2 Adjust the Camcorder.........................................13
2.3 Connecting to Power.....................................................14
2.4 LED Indicator................................................................14
2.5 Powering the Camcorder On / Off .................................16
2.5.1 Auto Power On/Off .............................................16
2.5.2 Manual Power On/Off.........................................16
2.5.3 Reset..................................................................16
2.6 Initial Settings ...............................................................17
2.6.1 Set Time Zone....................................................17
2.6.2 Set the Date / Time.............................................18
3 Using the Car Camcorder................................................19

2
3.1 Automatic Record .........................................................19
3.1.1 The Recording Screen........................................20
3.1.2 Emergency Recording........................................22
3.2 Add Speed Point...........................................................22
3.3 Picture in Video.............................................................23
3.4 Driving Safety ...............................................................23
3.4.1 Speed Cam Alert ................................................24
3.4.2 Speed Limit Alert ................................................25
3.4.3 Driver Fatigue Alert.............................................26
3.4.4 LDWS.................................................................26
3.4.5 FCWS ................................................................28
3.4.6 Headlight Warning..............................................29
3.7 Playback Videos and Photos.........................................34
3.8 The Playback Screen....................................................35
3.9 Deleting Files................................................................36
4 Initial set up Go Dashcam application............................38
5 Using the Go Dashcam application.................................41
5.1 Camera preview, record, snapshot................................42
5.2 Playback, delete, download...........................................43
5.3 Local album ..................................................................46
5.4 Camera Setting.............................................................47
6 Adjusting the Settings .....................................................48
6.1 Using the Menu.............................................................48
6.2 Menu Items...................................................................48
7 Installing the Software .....................................................53
8 SuperCar...........................................................................54
9 Specifications...................................................................55

3
About this Guide
The content in this document is for information purpose and is
subject to change without prior notice. We have made every effort to
ensure that this User Guide is accurate and complete.
However, no liability is assumed for any errors or omissions that
may have occurred.
The manufacturer reserves the right to change the technical
specifications without prior notice.
Regulatory notices
This document provides country- and region-specific non-wireless
and wireless regulatory notices and compliance information for your
product. Some of these notices may not apply to your product.
Prohibition of co-location
This device and its antenna(s) must not be co-located or operated in
conjunction with any other antenna or transmitter.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or
Battery by users in private households in the European Union
This symbol on the product or on the packaging
indicates that this cannot be disposed of as a household
waste. You must dispose of your waste equipment
and/or battery by handling it over to the applicable
take-back scheme for the recycling of electrical and
electronic equipment and/or battery. For more
information about recycling of this equipment and/or
battery, please contact your city office, the shop where
you purchased the equipment or your household waste
disposal service. The recycling of materials will help to
conserve natural resources and ensure that it is recycled
in a manner that protects human health and
environment.

4
FCC
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Caution: changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator and your body. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.

5
CE Regulatory Notice
The product herewith complies with the requirements of the
RED-Directive 2014/53/EU.
EU Health Protection: This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
Notes on Installation
1. Please measure the front windshield viewing area, make sure
not to block driver's front view, install the camcorder below the
rearview mirror (the central, higher right position of the front
windshield). And we recommend that the sky and the land
occupied by the screen 50%, fix the car holder and then adjust
the camcorder so that the lane is aligned with the screen. Proper
installation enables the camcorder to maximize the efficiency
also can enhance the accuracy of LDWS.
2. Make sure that the lens is within the wiping range of the
windscreen wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be
left on the lens and will result in unclear videos or pictures.
Clean the lens on a regular basis.
4. Do not install the camcorder on a tinted window. Doing so may
damage the tint film.
5. Make sure that the installation position is not hindered by the
tinted window.
6. This product is suitable for light windshield or light color
heat-resistant film windows , it will affect video quality if install it
on the dark windows or dark heat-resistant film windows.
7. Use the products of the attached power charger only, please do
not use other brand power charger, in order to avoid equipment
burn or cause the battery explosion.
Caution
Due to local laws and vehicles safety considerations, do not
operate the camcorder while driving.
Set up time zone, time and date accurately before you use this
camcorder.
Please use SuperCar software under the condition that
Electronic Map are functioning normally.

6
The firmware function in the camcorder is for reference only,
drivers are advised to exercise discretion based on actual road
conditions.
The results of GPS positioning are only for reference, and
should not affect the actual driving situation. The camcorder
also cannot ensure the positioning accuracy.
GPS positioning accuracy may differ depending on weather
and location such as high buildings, tunnels, undergrounds, or
forests. GPS satellite signals cannot pass through solid
materials (except glass). Tinted window will also affect the
performance of the GPS satellite reception.
GPS reception performance on each camcorder may differ.
The camcorder cannot determine the accuracy of the
positioning results from different hardware.
The values displayed in this camcorder, such as speed and
position, may be inaccurate due to the influence of surrounding
environment. They are for your reference only.
This product is used only for non-commercial use, within the
maximum limits permitted by applicable law. We do not take
any responsibilities for the loss of use of the product.
This camcorder gets warm when in use; this is normal.
Improper use or operation of the product may result in damage
of the product or its accessories and void the warranty.
Wi-Fi Signals are unable to pass through the building. The
upper limit of signal transmission is 5m.
Wi-Fi Operation Channel: Ch1~Ch13（for EU）
The product employs wireless data communication which may
interfere, or be interfered by, a near-by camcorder.
Never use this camcorder in the vicinity of a microwave oven or
at places where there is radio interference.
Radio wave reception may be worsened in specific
environments.
Please be advised that if another camcorder is also using the
same 2.4GHz band as this product, the processing speed of
both camcorders may slow down.
This product gets warm when in use; this is normal.
Improper use or operation of the product may result in damage
of the product or its accessories and void the warranty.

7
The radio frequency (RF) generated by this RF electronic
camcorder may cause adverse effects on the operation of other
electronic camcorders and result in malfunctioning. Wireless
transmitters and circuitry may also interfere with other
electronic camcorders. Therefore, do observe the following
precautions:
Aircraft: Never use a radio transmitter when you are in an
airplane. Please switch off the Wi-Fi function of the
camcorder.
Vehicle: The radio frequency transmitted by this
camcorder may affect the electronic system in a motorized
vehicle. Please consult the manufacturer or dealer of your
vehicle on the possible effect.
Pacemaker: In order to prevent any potential interference
to a pacemaker, anyone who uses a pacemaker should be
advised, that, when using this camcorder, a minimum
distance of 15cm (6 inch) should be kept between the
camcorder and the pacemaker; and never put this
camcorder in a chest pocket. In case of any doubt of
interference, switch off the camcorder immediately.
Medical Camcorder: If you use a personal medical
camcorder, consult the camcorder manufacturer or your
physician to confirm if your camcorder is sufficiently
shielded from the RF transmission of this camcorder.
Medical Facilities: Hospitals and medical institutes may
use facilities that are sensitive to an external RF energy.
Observe such instructions when the medical care
personnel or any posted sign requests you to switch off
any camcorder that may interfere the radio frequency.
Explosion sites or any location with a posted sign: In order to
prevent interfering with an explosion activity, observe all the
signage and instructions in the Explosion Area or in a zone with
a “Switch Off 2-way Radios” sign by switching off camcorders
that may interfere with the radio frequency.
HP Inc. is NOT responsible for the loss of any data/content
during operation.
Disposal of a battery into fire or a hot oven, or mechanically
crushing or cutting of a battery, that can result in an explosion.

8
Leaving a battery in an extremely high temperature
surrounding environment that can result in an explosion or the
leakage of flammable liquid or gas

9
1 Introduction
Thank you for purchasing this advanced Car Camcorder. This
product is specifically designed for real time video recording when
driving. It also supports a HP rear camera. You might ask distributor
for further information.
1.1 Features
Full HD 1920*1080
2.4" TFT-LCD color screen
150° Wide angle lens
Collision Detection, when a collision is detected, the camcorder
will automatically trigger the emergency recording
Parking Mode
Multifunction traffic safety reminder
1.2 Package Contents
The package contains the following items. In case there is any
missing or damaged item, contact your dealer immediately.
Car camcorder
Electrostatic
sticker
CD-ROM
Quick start guide
Car charger
Rear Camera
(option)

10
1.3 Product Overview
Note:
Please press the button (3~7) according to the diagramnotice shown on screen.

11
2 Getting Started
2.1 Storage Media
2.1.1 Insert the Memory Card
Insert memory card with the pins facing forward and the screen of
the camcorder facing forward too, see the picture as below:
2.1.2 Remove the Memory Card
If the camcorder is power on, please power off first and wait for the
procedure of switching off the camcorder completed before
removing the memory card.
Note:
1. Do not remove or insert the memory card when the camcorder is turned on. This may
damage the memory card.
2. Support SDHC class 10 and memory storage 8GB or above (support up to 32GB).
3. Please format the micro SD cards before the initial use. The formatted file type for this
camcorder is FAT32 file.
4. Periodically format the microSD card (recommended period: once a month).

12
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Put the electrostatic sticker onto the suggested area on the
windshield. Before putting the sticker, please wipe and clean
the windshield. During the installation, please make sure the
bubbles in between the sticker and the window are all gone.
2. Peel off the protective plastic sheet from the adhesive pad.
3. Place and press the bracket firmly onto the electrostatic
sticker on the windshield window. Make sure the base is
securely locked in place.

13
2.2.2 Adjust the Camcorder
1. Loosen the knob to swivel the camcorder to adjust view angle.
2. Then tighten the knob to make sure the camcorder is securely
locked in place.

14
2.3 Connecting to Power
Use only the supplied car charger to power up the camcorder.
1. Connect one end of the car charger to the USB connector of
the camcorder. USB port input: DC 5V / 1A.
2. Plug the other end of the car charger to the cigarette lighter
socket of your vehicle. Once the vehicle engine is started, the
camcorder automatically powers on. Car charger input: DC 12 /
24V.
2.4 LED Indicator
Status Explanation
LED Indicator Color
Power off, connect
external power
Red
Power on, standby
Green
Recording/ Recording
and screen off
Flash red

15

16
2.5 Powering the Camcorder On / Off
2.5.1 Auto Power On/Off
Start the car engine, wait a few seconds to charge the camcorder,
and then screen will light up and the camcorder will automatically
power on and start recording.
Once the vehicle engine shuts down, the camcorder automatically
saves the recording and turns off the power.
2.5.2 Manual Power On/Off
To manually turn on the power, press the POWER button.
To turn off, press and hold the POWER button for at least 2
seconds.
2.5.3 Reset
Press and hold the Power button for 8 seconds to reset the device.

17
2.6 Initial Settings
Before using the camcorder, we recommend you setup the correct
Time zone, Date and Time.
Note:
Please note that if you press the button during recording, the system will stop recording
and enter OSD menu. Make sure the recording is already stopped then continue operating the
menu.
2.6.1 Set Time Zone
To set the time zone, do the following:
1. Press the button to enter the OSD menu.
2. Press the or button to select Set Time Zone, and
then press the button for entering function menu.
3. Press the or button to set the current time zone,
and then press the button to complete setting.
4. Press the button to return to recording screen.
Note:
1. If Time Sync. is on, camcorder clock will be calibrated via satellite clock signal based on Set
Time zone.
2. If satellite positioning is not successful, camcorder clock will run based on user defined time.

18
2.6.2 Set the Date / Time
To set the correct date and time, do the following:
1. Press the button to
enter the OSD menu.
2. Press the or
button to select Date / Time,
and then press the
button for entering function
menu.
3. Press the or
button to adjust the value, and then press the button to
set the next field.
4. Repeat step 3 until the date and time setting is completed.
Note:
To ensure the accuracy of the video file time, please reset the date and time when not in use
over 7 days.

19
3 Using the Car Camcorder
3.1 Automatic Record
Start the car engine, wait a few seconds to charge the camcorder,
and then screen will light up and the camcorder will automatically
power on and start recording.
Recording will automatically stop when the engine is switched off.
Note:
1. Some vehicle power supply would not turn on / off automatically with the car engine start, if
the camcorder cannot automaticallypower on/off with the car engine, please manually connect
the power supply with the vehicle power, and then power on, or manually power off the
camcorder and then release the connector with the car power supply.
2. It can be configured to save a video file for every 30 seconds, 1 or 3 minutes of recording.
3. All the videos and photos are saved in the memory card, if memory card is full,loop
recording will generally overwrite the oldest video file.
4. The camcorder is built-in super capacitor. After start the car engine, please wait a few
seconds for charging the camcorder, and then the camcorder will automatically power on and
start recording.