HP f710 User manual

f710
f710
f710
f710
f710
f710
f710
完整版產品使用者手冊請至
完整版產品用戶手冊請至

1
Caution
 Use the authorized charger only.
 Never disassemble or attempt repair of this product. Doing so may
damage the camcorder, cause electric shock and void your product
warranty.
 Never short-circuit the battery.
 Set up time and date accurately before you use this camcorder.
 xposing the camcorder to open flames can cause explosion.
 Due to local laws and vehicles safety considerations, do not manually
operate the camcorder while driving.
 The values displayed in this system, such as speed, position, and the
distance warning to the speed camera set points, may be inaccurate
due to the influence of surrounding environment. They are for your
reference only.
 Hewlett-Packard Company is NOT responsible for the loss of any
data/content during operation.
Before you start using the
C
ar Camcorder it is
assumed that you agree to the above statements.

2
1Introduction
Thank you for purchasing this advanced camcorder. This camcorder is
specifically designed for real time video and audio recording when
driving.
1.1 Features
•High Dynamic Range Imaging (HDR)
•Super HD 2304*1296
•Up to 150 Degree Wide Angle Glass Lens &IR-Filter
•Built-in G-sensor
•Motion Detection
•Collision Detection
•mergency Recording File
•Advanced Driver Assistance Systems (ADAS)
1.2 Package Contents
The package contains the following items. If there are any missing or
damaged items, contact your dealer immediately.
Car camcorder Hook+Band CD-ROM
Quick start guide Car adapter

3
1.3 Product Overview

4
No. Item
1 Rearview mirror clip
2 Hook
3 Band
4 Display
5 Power on/off( )
6 Settings Menu and Delete button ( )
7 Microphone enable/ disable and Up navigation button.
( )
8 Record Stop/Start and Select button ( )
9 Press to turn LCD on or off. ( )
10 Mode Select ( )
11 xposure Value setting and Down navigation button ( )
12 MicroSD memory card port
13 Car power adapter and PC connection USB port
14 Reset
15 Lens

5
2Getting Started
2.1 Inserting the Memory Card
Insert the memory card with the gold contacts facing the back of the
camcorder. Push the memory card until it clicks into place. (Use class 6 or
greater speed micro SD cards for this camcorder; It is recommended to
format the micro SD cards before the initial use.)
To remove the memory card
Push the edge of the memory card inward until you hear/feel it click,
then allow it to push out until you can remove it from the slot.
Note:
1. Do not remove or insert the memory card when the camcorder is powered on. This may damage
the memory card.
2. It is recommended to use a 32 GB, Class 6 speed or above micro SD card.
3. It is recommended to format the micro SD cards before the initial use.

6
2.2 Insta ing in Vehic es
1. Chip on to your original car mirror.
2. Circle the clip with the band.
3. Adjust the camcorder lens.
2.3 Connecting to Power
Use only the supplied car adapter to power up the camcorder and charge
the built-in battery.
1. Connect one end of the car adapter to the USB connector of the
camcorder.
2. Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on.

7
Note:
Please take note if the environment temperature reaches 45°C or above, the car adapter still can
supply power to camcorder, but it may not charge the battery. This is characteristic of Lithium
polymer battery and is not a malfunction.
2.4 Powering the Camcorder On / Off
2.4.1 Auto Power On/Off
Once the vehicle engine is started, the camcorder automatically powers
on. And the recording will automatically start.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power within 10 seconds.
Note:
Automatic power up and shut down assumes the power socket is linked to the car ignition.
2.4.2 Manua Power On/Off
To manually turn on the power, press the POWER button.
To turn off, press and hold the POWER button for at least 2 seconds.
To reset, press and hold the RESET button on the back of the camcorder
for at least 5 seconds.

8
2.5 Initia Settings
2.5.1 Set the Date and Time
To set the correct date and time, do the following:
1. Press the button twice to enter the OSD menu .
2. Press the or button to
select Date / Time and press the
button.
3. Press the or button to
adjust the value and press the
button to move to another
field.
4. Repeat step 3 until the date and time setting is complete.
5. Press the button to exit the Date/Time settings. Press the
button again to exit the settings menu and return to the live
view mode.
Note:
When the battery is depleted, you must reset the date/time before the function -automatic record is
started. If the user doesn't reset the date/time, the camcorder will give you an alert after one minute
and the automatic record will be started.

9
3Using the Camcorder
3.1 Recording Videos
3.1.1 Record videos whi e driving
When the vehicle engine starts up and the Automatic Record function is
enabled, the camcorder automatically turns on and starts recording.
Recording will automatically stop when the engine is switched off.
Or, press the button to stop recording manually.
Note:
With some vehicle models, the automatic power up and off feature of this car camcorder will not
function because the cigarette lighter/power socket is not linked to the ignition system.
To work around this issue, please do one of the following:
- Manually turn on or off the cigarette lighter/power socket if this is possible with your vehicle model.
- Manually plug in the power adapter into the socket to turn on the car camcorder and unplug from
the socket to turn off the car camcorder.
3.1.2 Emergency Recording
This Car Camcorder is equipped with a sensor that is designed to detect
collisions and automatically trigger the mergency Recording feature.
The mergency Recording icon will be displayed if this feature is
initiated as illustrated. The mergency Recording video will not be
overwritten via the normal loop recording function of this product.
To manually initiate the mergency
Recording feature, press the
button during the normal recording
function.
To stop the recording, press the
button.

10
3.2 Playback Videos and Photos
1. If recording is in progress, press the button to stop recording.
The standby screen is displayed.
2. Press the button twice to
enter the playback menu.
3. Press the or button to
select the file category or
that you want to browse
and press the button to
display thumbnail images of the recorded video or photo files.
4. Use the or to navigate through the video or photos
thumbnails. Thumbnails will become slightly enlarged when
selected.
3.2.1 P aying Videos
To play videos, do the following:
1. If recording is in progress, press the button to stop recording.
2. Press the button twice to enter the p ayback menu.
3. Press the or button to
select mergency events icon or
Video/Photo icon
and press the button.
4. Press the or button
to select Video and press the
button.

11
5. Press the or button to browse for the desired video file
and press the button to play the video.
6. Press the button to pause the playback. Press it again to
resume.
3.2.2 Viewing Photos
To view photos, do the following:
1. If recording is in progress, press the button to stop recording.
2. Press the button twice to enter the Playback menu.
3. Press the or button to enter Photo P ayback and press
the button.
4. Press the or button to select the icon and press
the button.
5. Press the or button to browse for the desired photo file
and press the button to view the file in full screen.

12
3.2.3 De eting Fi es
To delete file(s), perform the following steps:
1. If recording is in progress,
press the button to stop
recording.
2. Press the button twice
to enter the playback menu.
3. Press the or button
to select the Video/photo files icon. Note that by
design, mergency vent files cannot be deleted with this
procedure and press the button.
4. Press the or button to select the file to be deleted.
5. Press the button to
enter the Delete option menu
and press the button.
6. Press the or button
to select an option.
Item Description
Delete this file Delete the current selected file.
Delete All Deletes all files except mergency vent files.
7. Press the button to confirm delete.
Note:
Deleted files CANNOT be recovered. nsure the files you wish to preserve are backup before deletion.
mergency vent files can be deleted if connected to a PC/laptop or if the memory card is formatted
in the Settings menu.

1
注意

只能使用授權的充電器。

千萬不要拆解或試圖修理本產品。此舉可能損壞行車記錄器，造成觸
電並使產品保固失效。

千萬不要使電池短路。

使用此行車記錄器之前請準確設定時間與日期。

此行車記錄器暴露於明火中可能爆炸。

由於當地的法律及車輛安全考量，行駛當中請勿手動操作行車記錄器。

此系統顯示的數值，例如速度、位置，以及警告測速照相機設置點的
距離，都可能因為周遭環境的影響而不準確。這些數值僅供參考。

惠普公司對於操作當中的任何數據/內容流失概不負責。
在您開始使用此行車記錄器前，假設您已同意上述聲
明。

2
1簡介
本公司在此先感謝您購買此行車記錄器。此行車記錄器經過特別設
計，可於駕駛時錄下即時的影像與聲音。
1.1 特色
•高動態範圍成像(HDR)
•超高畫質 2304*1296
•達150 度廣角玻璃鏡頭及紅外線過濾器
•內建 G-感應器
•移動偵測
•碰撞偵測
•緊急錄影檔案
•先進駕駛輔助系統(ADAS)
1.2 包裝內容
包裝內包含下列項目。如有任何項目遺漏或毀損，請立刻聯絡經銷商。
行車記錄器 掛勾+鬆緊帶 CD-ROM
快速使用說明 汽車轉接器

3
1.3 產品概觀

4
號碼 項目
1 後視鏡夾
2 掛勾
3 鬆緊帶
4 顯示器
5 電源開關( )
6 設定選單及刪除按鈕 ( )
7 麥克風啟用/停用及向上導覽按鈕 ( )
8 錄影停止/開始及選擇按鈕 ( )
9 按下打開或關閉液晶顯示器 ( )
10 模式選擇 ( )
11 曝光值設定及向下導覽按鈕 ( )
12 MicroSD 記憶卡埠
13 汽車電源轉接器及 PC 連接 SB 埠
14 重設
15 鏡頭

5
2開始
2.1 插入記憶卡
記憶卡金色接觸面朝向行車記錄器背面插入。將記憶卡推到底直到扣
住。(此記錄器請使用 class 6 或速度更快的 micro SD 記憶卡；建議在
初次使用前先將 micro SD 卡格式化。)
移除記憶卡
將記憶卡邊緣往內推到你聽到/感覺到喀噠聲，然後讓它從卡槽推出直
到你可以移除。
備註：
1. 行車記錄器電源打開時不要移除或插入記憶卡。此舉可能損壞記憶卡。
2. 建議使用32 GB，速度 Class 6 以上的micro SD 記憶卡。
3. 初次使用前建議先將micro SD 記憶卡格式化。

6
2.2 安裝於車內
1. 夾在原本的汽車後視鏡上。
2. 用鬆緊帶圈住夾子。
3. 調整記錄器鏡頭。
2.3 連接電源
僅使用供應的汽車轉接器供電給行車記錄器並讓內建的電池充電。
1. 汽車轉接器的一端連接到記錄器的 SB 連接器。
2. 將汽車充電器的另一端插到車內的點煙器插孔內。車輛的引擎一
旦發動，記錄器電源自動打開。

7
備註：
請注意如果環境溫度達45°C 以上，汽車轉接器仍可供電給記錄器，但可能無法讓電池充電。
這是鋰電池的特性而非故障。
2.4 記錄器電源開/關
2.4.1 電源自動開/關
車輛引擎一旦發動，記錄器電源便自動打開，並且開始自動錄影。
車輛引擎一旦關閉，記錄器便自動儲存錄影並且在 10 秒內關掉電源。
備註：
假設電源插座有連結到汽車點煙器，則電源會自動打開及關閉。
2.4.2 手動電源開/關
按下電源開關按鈕以手動方式打開電源。
按住電源開關按鈕至少 2秒關掉電源。
按住記錄器背面的重設按鈕至少 5秒重新設定。