HPE X130 10G SFP+ LC LRM User manual

HPE Comware-Based Devices Transceiver
Modules
User Guide (10G)
Part number: 5200-2358c
Document version: 6W103-20190408

© Copyright 2017, 2019 Hewlett Packard Enterprise Development LP
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard
Enterprise products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett
Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or
copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software
Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s
standard commercial license.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard
Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise
website.
Acknowledgments
Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the
United States and other countries.
Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
Adobe® andAcrobat® are trademarks of Adobe Systems Incorporated.
Java and Oracle are registered trademarks of Oracle and/or its affiliates.
UNIX® is a registered trademark of The Open Group.

i
Contents
Overview ························································································1
List of 10-Gigabit transceiver modules and network cables ··································································1
About optical transceiver modules ··································································································· 1
Data rate ····························································································································· 1
Transmission distance············································································································ 1
Central wavelength················································································································2
Fiber ···································································································································2
LC connector························································································································3
Optical parameters ················································································································4
SFP+ transceiver modules ·································································5
SFP+ optical transceiver modules ··································································································· 5
Models and specifications ······································································································· 5
SFP+ copper cables ····················································································································· 7
Models and specifications ······································································································· 7
SFP+ active optical cables·············································································································7
Models and specifications ······································································································· 8
XFP transceiver modules ···································································9
Models and specifications··············································································································9
CX4 copper cables ········································································· 12
Models and specifications············································································································ 12
10-Gigabit Ethernet transceiver modules compatibility matrix··················· 13
10-Gigabit Ethernet transceiver modules ························································································ 13
Switching minimum software release requirements··········································································· 14
HPE FlexFabric 12900 switch series minimum software version requirements ································ 14
HPE FlexFabric 12900E switch series minimum software version requirements ······························ 18
HPE FlexFabric 11900 switch series minimum software version requirements ································ 20
HPE FlexFabric 10500 switch series minimum software version requirements ································ 21
HPE FlexFabric 7900 switch series minimum software version requirements ·································· 30
HPE FlexFabric 7500 switch series minimum software version requirements ·································· 31
HPE 6127XLG Blade switch series minimum software version requirements ·································· 37
HPE 6125XLG Blade switch series minimum software version requirements ·································· 38
HPE FlexFabric 5980 switch series minimum software version requirements ·································· 39
HPE FlexFabric 5950 switch series minimum software version requirements ·································· 39
HPE FlexFabric 5945 switch series minimum software version requirements ·································· 41
HPE FlexFabric 5940 switch series minimum software version requirements ·································· 42
HPE FlexFabric 5930 switch series minimum software version requirements ·································· 43
HPE FlexFabric 5920 switch series minimum software version requirements ·································· 45
HPE FlexFabric 5900 switch series minimum software version requirements·································· 45
HPE FlexFabric 5830 switch series minimum software version requirements ·································· 48
HPE FlexFabric 5710 Switch series minimum software version requirements ································· 49
HPE FlexFabric 5700 switch series minimum software version requirements ·································· 50
Document conventions and icons ······················································ 54
Conventions······························································································································ 54
Network topology icons ··············································································································· 55
Support and other resources····························································· 56
Accessing Hewlett Packard Enterprise Support················································································ 56
Accessing updates ····················································································································· 56
Websites ··························································································································· 57
Customer self repair ············································································································ 57
Remote support ·················································································································· 57
Documentation feedback ······································································································ 58

ii
Index ··························································································· 59

1
Overview
This document describes 10-Gigabit transceiver modules and cables available for HPE Comware-
based devices.
List of 10-Gigabit transceiver modules and
network cables
Transceiver module type
Connector type
SFP+ transceiver modules
SFP+ optical transceiver module LC
SFP+ copper cable (for interconnecting devices)
N/A
SFP+ active optical cable
XFP transceiver modules
10-Gigabit small form-factor pluggable (XFP) module (transceiver) LC
CX4 copper cables
10-Gigabit CX4 copper cable (for interconnecting devices) N/A
NOTE:
•
HPE 10-Gigabit transceiver modules and cables are subject to change over time. For the most
recent list of HPE 10-Gigabit
transceiver modules and cables, contact HPE technical support or
marketing staff.
•
The available transceiver modules and cables vary by HPE devices. For the transceiver
modules and cables available for a device, see the installation guide for the device. For the 10-
Gigabit transceiver modules and cables for a switch, see "10-Gigabit Ethernet transceiver
modules compatibility matrix".
About optical transceiver modules
Optical transceiver modules (also called fiber transceiver modules) transmit signals over optical
fibers and are suitable for long distance transmission.
The following information explains the major specifications of a fiber transceiver module.
Data rate
Data rate is the number of bits transmitted per second. Data rate is typically measured in Gigabits
per second (Gbps).
Transmission distance
The transmission distance of optical transceiver modules is divided into short and long-range types.
Typically, a distance of 2 km (1.24 miles) or below is short-range type and a distance of 10 km (6.21
miles) is long-range type.

2
Transmission distances supported by optical transceiver modules are mainly limited by signal
attenuation and dispersion suffered during the transmission of fiber signals over fibers.
•
Signal attenuation occurs because of absorption, dispersion, and leakage over the media as
light travels through optical fibers. This attenuation increases in direct ratio to transmission
distance.
•
Dispersion occurs because a fiber transmits light with different wavelengths at different
speeds. Light with different wavelengths reaches the receiving end at different time. This
results in spread and blurred pulses.
Central wavelength
Central wavelength represents the wave band used for optical signal transmission. The following
central wavelengths (wave bands) are available for common optical transceiver modules: 850 nm,
1310 nm, and 1550 nm.
•
The 850 nm wave band is used for short-reach transmission.
•
The 1310 nm and 1550 nm wave bands are used for middle-reach and long-haul
transmissions.
Fiber
Fiber types
Fibers are classified into multimode fibers and single-mode fibers.
•
Multimode fibers
Multimode fibers (MMFs) have thicker fiber cores than single-mode fibers and can transport
light in multiple modes. However, the intermodal dispersion is greater and worsens as the
transmission distance increases.
Multimode fibers can be classified into multiple grades according to their diameters and modal
bandwidth, as shown in Table 1. The modal bandwidth is a comprehensive index that reflects
the optical characteristics of a multimode fiber. The modal bandwidth of a multimode fiber is
equal to the modulation frequency of the maximum modulation frequency pulse that can pass
a fiber × the fiber length.
International Telecommunication Union (ITU) defines multimode fiber types in its G series
standards. The most commonly used multimode fiber is defined in the ITU G.651 standard.
The G.651-compliant fiber transmits light in the wavelength range of 800 nm to 900 nm or
1200 nm to 1350 nm.
Table 1 Multimode fiber grades
Fiber grade
Fiber diameter (μm)
Modal bandwidth at 850 nm (MHz*km)
OM1 62.5/125 200
OM2 50/125 500
OM3 50/125 2000
OM4 50/125 4700
Other factors that determine the transmission distance of multimode fibers include interface
type, central wavelength, and fiber grade, as shown in Table 2.
Table 2 Multimode fiber specifications
Interface type
Central wavelength (nm)
Fiber grade
Transmission distance
1000BASE-SX 850 OM1 < 275 m (902.23 ft)

3
Interface type
Central wavelength (nm)
Fiber grade
Transmission distance
OM2 < 550 m (1804.46 ft)
10GBASE-SR 850
OM1 < 33 m (108.27 ft)
OM2 < 82 m (269.03 ft)
OM3 < 300 m (984.25 ft)
OM4 < 450m (1476.38 ft)
10GBASE-LRM 1310
OM1 < 220 m (721.78 ft)
OM2 < 220 m (721.78 ft)
OM3 < 220 m (721.78 ft)
OM4 < 220 m (721.78 ft)
•
Single-mode fibers
Single-mode fibers (SMFs) have a small core size (typically 9 μm or 10 μm) and can transmit
light in only one mode. Single-mode fibers suffer little intermodal dispersion and are suitable
for long-haul communication. Single-mode fibers transmit light at the central wavelength of
1310 nm or 1550 nm.
Telecommunication Industries Alliance (TIA)/Electronic Industries Alliance (EIA) defines that
single-mode fibers use yellow outer jackets with an "SM" mark.
ITU defines single-mode fiber types in its G series standards. The most commonly used
single-mode fibers are defined in ITU G.652 and G.655 standards. Table 3 describes features
of the G.652 and G.655-compliant fibers.
Table 3 Features of G.652 and G.655-compliant fibers
Single-mode fiber type
Wavelength (nm)
Features
Applications
G.652-compliant fiber
(standard single-mode
fiber)
•1260 to 1360
•1530 to 1565
Zero dispersion at
1310 nm.
Connecting transceiver
modules with a central
wavelength of 1310 nm
or 1550 nm.
G.655-compliant fiber
(non-zero dispersion
shifted fiber)
1530 to 1565 Near-zero dispersion
around 1550 nm.
1550-nm wavelength-
division multiplexing
(WDM) transmissions.
Fiber diameter
Fiber diameter is expressed as core diameter/cladding diameter, in μm. For example, 9/125 μm
represents a fiber core diameter of 9 μm and a fiber cladding diameter of 125 μm.
As a best practice, use the following fiber diameters for the HPE Comware-based devices:
•
G.652 standard single-mode fiber—9/125 μm.
•
G.655 single-mode fiber—9/125 μm.
•
G.651 standard multimode fiber—50/125 μm or 62.5/125 μm.
LC connector
CAUTION:
Cover the connector with a dust cap when it is not connected to optical fibers.

4
Connectors connect transceiver modules to the transmission media.
Figure 1 LC connector
Optical parameters
The following are the major optical parameters:
•
Transmit power—Transmit power is the power at which the transmitter of an optical
transceiver module transmits optical signals, in dBm.
•
Receive power—Receive power is the power at which the receiver of a optical transceiver
module receives optical signals, in dBm.
The transceiver module specifications in this guide provide the average transmit and receive power
ranges.

5
SFP+ transceiver modules
SFP+ optical transceiver modules
Figure 2 SFP+ optical transceiver module
Models and specifications
SFP+ optical transceiver modules provide a transmission rate of 10.31 Gbps and use LC connectors.
Table 4 Specifications for SFP+ optical transceiver modules (1)
Product
code
HPE
description
Central
wavelength
(nm)
Fiber
mode
Fiber
diameter
(µm)
Modal
bandwidth
(MHz*km)
Transmission
distance
JD092B
HPE X130 10G
SFP+ LC SR
Transceiver
850 MMF
50/125
2000 300 m (984.25 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
62.5/125
200 33 m (108.27 ft)
160 26 m (85.30 ft)
JQ431A
HPE X130 10G
SFP+ LC SR
Data Center
Advanced
Transceiver
850 MMF
50/125
2000 300 m (984.25 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
62.5/125
200 33 m (108.27 ft)
160 26 m (85.30 ft)
JD093B
HPE X130 10G
SFP+ LC LRM
Transceiver
1310 MMF
50/125
1500 220 m (721.78 ft)
500 220 m (721.78 ft)
400 100 m (328.08 ft)
62.5/125
200 220 m (721.78 ft)
160 220 m (721.78 ft)
JD094B
HPE X130 10G
SFP+ LC LR
Transceiver
1310 SMF 9/125 N/A 10 km (6.21 miles)

6
Product
code
HPE
description
Central
wavelength
(nm)
Fiber
mode
Fiber
diameter
(µm)
Modal
bandwidth
(MHz*km)
Transmission
distance
JQ432A
HPE X130 10G
SFP+ LC LR
Data Center
Advanced
Transceiver
1310 SMF 9/125 N/A 10 km (6.21 miles)
JG234A
HPE X130 10G
SFP+ LC ER
40km
Transceiver
1550 SMF 9/125 N/A 40 km (24.86
miles)
JG915A
HPE X130 10G
SFP+ LC LH
80km
Transceiver
1550 SMF 9/125 N/A 80 km (49.71
miles)
JL250A
HPE X130 10G
SFP+ LC LH80
tunable
Transceiver
1547.75 SMF 9/125 N/A 80 km (49.71
miles)
Table 5 Specifications for SFP+ optical transceiver modules (2)
Product
code HPE description
Optical parameters (dBm)
Transmit power
Receive power
JD092B HPE X130 10G SFP+ LC SR
Transceiver –7.3 to –1 –9.9 to +0.5
JQ431A HPE X130 10G SFP+ LC SR Data
Center Advanced Transceiver –7.3 to –1 –9.9 to +0.5
JD093B HPE X130 10G SFP+ LC LRM
Transceiver –6.5 to +0.5 –6.5 to +1.5
JD094B HPE X130 10G SFP+ LC LR
Transceiver –8.2 to +0.5 –14.4 to +0.5
JQ432A HPE X130 10G SFP+ LC LR Data
Center Advanced Transceiver –8.2 to +0.5 –14.4 to +0.5
JG234A HPE X130 10G SFP+ LC ER 40km
Transceiver –4.7 to +4 –15.8 to –1
JG915A HPE X130 10G SFP+ LC LH 80km
Transceiver 0 to +4 –24 to –7
JL250A HPE X130 10G SFP+ LC LH80 tunable
Transceiver –1 to +3 –24 to –7
NOTE:
•
A mode conditioning patch cord is required when you use OM1 or OM2 fiber types on an HPE
X130 10G SFP+ LC LRM Transceiver (JD093B). Never use mode conditioning patch cords for
OM3 fiber types. For more information about mode conditioning patch cords, see related parts
in the IEEE 802.3 standard.
•
An HPE X130 10G SFP+ LC LH80 tunable Transceiver (JL250A) supports tunable
wavelengths. Therefore, cold boot for the module takes longer than cold boot for common
SFP+ transceiver modules. Cold boot time within 90 seconds is acceptable for the module.

7
SFP+ copper cables
Figure 3 SFP+ copper cable
Models and specifications
Table 6 Specifications for SFP+ copper cables
Product code
HPE description
Cable length
Data rate
JD095C HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable 0.65 m (2.13 ft)
10.31 Gbps
JD096B HPE X240 10G SFP+ SFP+ 1.2m Direct Attach
Copper Cable 1.2 m (3.94 ft)
JD096C HPE X240 10G SFP+ SFP+ 1.2m Direct Attach
Copper Cable 1.2 m (3.94 ft)
JD097B HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable 3 m (9.84 ft)
JD097C HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable 3 m (9.84 ft)
JG081C HPE X240 10G SFP+ SFP+ 5m Direct Attach Copper
Cable 5 m (16.40 ft)
JC784C HPE X240 10G SFP+ SFP+ 7m Direct Attach Copper
Cable 7 m (22.97 ft)
SFP+ active optical cables
Figure 4 SFP+ active optical cable

8
Models and specifications
Table 7 Specifications for SFP+ active optical cables
Product
code
HPE description Cable length Data rate
JL290A HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable 7 m (22.97 ft)
10.31 Gbps
JL291A HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable 10 m (32.81 ft)
JL292A HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable 20 m (65.62 ft)

9
XFP transceiver modules
Figure 5 XFP transceiver module
Models and specifications
10-Gigabit XFP optical transceiver modules use LC connectors.
Table 8 Specifications for XFP transceiver modules (1)
Product
code
HPE
description
Central
wave-
length
(nm)
Data
rate
(Gbps)
Fiber
mode
Fiber
diameter
(µm)
Modal
band-
width
(MHz*km)
Transmission
distance
JD117B
HPE X130
10G XFP LC
SR
Transceiver
850 10.31 MMF
50/125
2000 300 m (984.25
ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
62.5/125
200 33 m (108.27 ft)
160 26 m (85.30 ft)
JD108B
HPE X130
10G XFP LC
LR 1310nm
Transceiver
1310 10.31 SMF 9/125 N/A 10 km (6.21
miles)
JD088A
HPE X135
10G XFP LC
LR
Transceiver
1310 9.95 to
11.3 SMF 9/125 N/A 10 km (6.21
miles)
JD121A
HPE X135
10G XFP LC
ER
Transceiver
1550 9.95 to
10.7 SMF 9/125 N/A 40 km (24.86 miles)
JD107A
HPE X130
10G XFP LC
ZR 1550nm
Transceiver
1550 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71
miles)
JG226A
HPE X180
10G XFP LC
LH 80km
1538.98nm
DWDM
1538.98 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71 miles)

10
Product
code
HPE
description
Central
wave-
length
(nm)
Data
rate
(Gbps)
Fiber
mode
Fiber
diameter
(µm)
Modal
band-
width
(MHz*km)
Transmission
distance
Transceiver
JG227A
HPE X180
10G XFP LC
LH 80km
1539.77nm
DWDM
Transceiver
1539.77 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71
miles)
JG228A
HPE X180
10G XFP LC
LH 80km
1540.56nm
DWDM
Transceiver
1540.56 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71
miles)
JG229A
HPE X180
10G XFP LC
LH 80km
1542.14nm
DWDM
Transceiver
1542.14 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71
miles)
JG230A
HPE X180
10G XFP LC
LH 80km
1542.94nm
DWDM
Transceiver
1542.94 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71
miles)
JG231A
HPE X180
10G XFP LC
LH 80km
1558.98nm
DWDM
Transceiver
1558.98 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71 miles)
JG232A
HPE X180
10G XFP LC
LH 80km
1559.79nm
DWDM
Transceiver
1559.79 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71 miles)
JG233A
HPE X180
10G XFP LC
LH 80km
1560.61nm
DWDM
Transceiver
1560.61 9.95 to
10.31 SMF 9/125 N/A 80 km (49.71 miles)
Table 9 Specifications for XFP transceiver modules (2)
Product code HPE description
Optical parameters (dBm)
Transmit
power
Receive power
JD117B HPE X130 10G XFP LC SR Transceiver –7.3 to –1.08 –9.9 to –1
JD108B HPE X130 10G XFP LC LR 1310nm
Transceiver –8.2 to +0.5 –14.4 to +0.5

11
Product code HPE description
Optical parameters (dBm)
Transmit
power
Receive power
JD088A HPE X135 10G XFP LC LR Transceiver –6 to –1 –10.3 to +0.5
JD121A HPE X135 10G XFP LC ER Transceiver –1 to +2 –14.1 to –1
JD107A HPE X130 10G XFP LC ZR 1550nm
Transceiver 0 to +4 –24 to –7
JG226A HPE X180 10G XFP LC LH 80km 1538.98nm
DWDM Transceiver –1 to +3 –24 to –7
JG227A HPE X180 10G XFP LC LH 80km 1539.77nm
DWDM Transceiver –1 to +3 –24 to –7
JG228A HPE X180 10G XFP LC LH 80km 1540.56nm
DWDM Transceiver –1 to +3 –24 to –7
JG229A HPE X180 10G XFP LC LH 80km 1542.14nm
DWDM Transceiver –1 to +3 –24 to –7
JG230A HPE X180 10G XFP LC LH 80km 1542.94nm
DWDM Transceiver –1 to +3 –24 to –7
JG231A HPE X180 10G XFP LC LH 80km 1558.98nm
DWDM Transceiver –1 to +3 –24 to –7
JG232A HPE X180 10G XFP LC LH 80km 1559.79nm
DWDM Transceiver –1 to +3 –24 to –7
JG233A HPE X180 10G XFP LC LH 80km 1560.61nm
DWDM Transceiver –1 to +3 –24 to –7
NOTE:
The 9/125µm single
-mode fibers used by transceiver modules JG226A through JG233A should
conform to ITU
-T G.655, and those used by other transceiver modules should conform to ITU-T
G.652.

12
CX4 copper cables
Figure 6 CX4 copper cable
Models and specifications
Table 10 Specifications for CX4 copper cables
Product code
HPE description
Cable length
Data rate
Description
JD363B HPE X230 Local Connect 50cm CX4
Cable 0.5 m (1.64 ft)
12 Gbps
Used for
interconnecting
deices, and
supports IRF
JD364B HPE X230 Local Connect 100cm
CX4 Cable 1 m (3.28 ft)
JD365A HPE X230 CX4 to CX4 3m Cable 3 m (9.84 ft)

13
10-Gigabit Ethernet transceiver modules
compatibility matrix
10-Gigabit Ethernet transceiver modules
Before you install, configure, or upgrade a device with HPE 10-Gigabit Ethernet transceiver modules,
always see the device's release notes for latest information. This compatibility matrix does not
replace or supersede the release notes.
Table 11 10 Gigabit Ethernet transceiver modules
Product code
Transceiver module
Description
SFP+
JD092B HPE X130 10G SFP+ LC SR
Transceiver LSPM1SFPP,SFP+ Module(850nm,300m,LC)
JD093B HPE X130 10G SFP+ LC LRM
Transceiver LSPM3SFPP,SFP+ Module(1310nm,220m,LC)
JD094B HPE X130 10G SFP+ LC LR
Transceiver LSPM2SFPP,SFP+ Module(1310nm,10km,LC)
JG234A HPE X130 10G SFP+ LC ER
40km Transceiver LSTM2SFP,SFP+ Module,(1550nm,40km,LC)
JG915A HPE X130 10G SFP+ LC LH
80km Transceiver
LSTM3SFPPA,10G SFP+ Optical Transceiver
Module,(1550nm,80km,LC)
JD097B HPE X240 10G SFP+ SFP+ 3m
Direct Attach Copper Cable LSPM1STK,SFP+ Cable,3m
JD097C HPE X240 10G SFP+ SFP+ 3m
Direct Attach Copper Cable LSPM1STKD,SFP+ Cable,3m
JG081C HPE X240 SFP+ SFP+ 5m
Direct Attach Copper Cable LSRM1STKD,SFP+ Cable,5m
JD095B
HPE X240 10G SFP+ SFP+
0.65m Direct Attach Copper
Cable
LSPM2STK,SFP+ Cable,0.65m
JD095C
HPE X240 10G SFP+ SFP+
0.65m Direct Attach Copper
Cable
LSPM2STKD,SFP+ Cable,0.65m
JD096B
HPE X240 10G SFP+ SFP+
1.2m Direct Attach Copper
Cable
LSPM3STK,SFP+ Cable,1.2m
JD096C
HPE X240 10G SFP+ SFP+
1.2m Direct Attach Copper
Cable
LSPM3STKD,SFP+ Cable,1.2m
JC784C HPE X240 10G SFP+ SFP+ 7m
Direct Attach Copper Cable LSTM5STK7D,SFP+Cable,7m
JL290A HPE X2A0 10G SFP+ to SFP+
7m Active Optical Cable
LSWM2SFPPL,10G SFP+ to SFP+ Active Optical
Cable,7m
JL291A HPE X2A0 10G SFP+ to SFP+
10m Active Optical Cable
LSWM2SFPPM,10G SFP+ to SFP+ Active Optical
Cable,10m

14
Product code
Transceiver module
Description
JL292A HPE X2A0 10G SFP+ to SFP+
20m Active Optical Cable
LSWM2SFPPN,10G SFP+ to SFP+ Active Optical
Cable,20m
JL250A HPE X130 10G SFP+ LC LH80
tunable Transceiver
LSXM1SFPP,10G SFP+ Optical Transceiver
Module,(Tunable,80km,LC)
Switching minimum software release
requirements
HPE FlexFabric 12900 switch series minimum software
version requirements
Switch or module Transceiver module (Product code)
Minimum software
release
DDM
support
Release
version
HPE FlexFabric
12900 48-port
10GbE SFP+ EA
Module (JG624A)
HPE X130 10G SFP+ LC SR Xcvr (JD092B) YES R1005P07
HPE X130 10G SFP+ LC LR Xcvr (JD094B) YES R1005P07
HPE X130 10G SFP+ LC ER 40km Xcvr (JG234A) YES R1005P07
HPE X130 10G SFP+ LC LH 80km Xcvr (JG915A) YES R1005P07
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097B) NO R1005P07
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097C) NO R1005P07
HPE X240 SFP+ SFP+ 5m Direct Attach Copper Cable
(JG081C) NO R1005P07
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095B) NO R1005P07
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095C) NO R1005P07
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
Cable (JD096B)NO R1005P07
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
Cable (JD096C)NO R1005P07
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable
(JL290A)YES F1033L05
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical
Cable (JL291A) YES F1033L05
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical
Cable (JL292A) YES F1033L05
HPE FlexFabric
12900 48-port
1/10GbE SFP+ EC
Module (JG626A)
HPE X130 10G SFP+ LC SR Xcvr (JD092B) YES R1005P07
HPE X130 10G SFP+ LC LR Xcvr (JD094B) YES R1005P07
HPE X130 10G SFP+ LC ER 40km Xcvr (JG234A) YES R1005P07

15
Switch or module Transceiver module (Product code)
Minimum software
release
DDM
support
Release
version
HPE X130 10G SFP+ LC LH 80km Xcvr (JG915A) YES R1005P10
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097B) NO R1005P07
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097C) NO R1005P07
HPE X240 SFP+ SFP+ 5m Direct Attach Copper Cable
(JG081C) NO R1005P10
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095B) NO R1005P07
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095C) NO R1005P07
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
Cable (JD096B)NO R1005P07
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
Cable (JD096C)NO R1005P07
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable
(JL290A)YES F1033L05
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical
Cable (JL291A) YES F1033L05
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical
Cable (JL292A) YES F1033L05
HPE FlexFabric
12900 48-port GbE
SFP EB Module
(JG855A)
HPE X130 10G SFP+ LC SR Xcvr (JD092B) YES R1005P07
HPE X130 10G SFP+ LC LRM Xcvr (JD093B) YES R1005P07
HPE X130 10G SFP+ LC LR Xcvr (JD094B) YES R1005P07
HPE X130 10G SFP+ LC ER 40km Xcvr (JG234A) YES R1005P07
HPE X130 10G SFP+ LC LH 80km Xcvr (JG915A) YES R1005P07
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097B) NO R1005P07
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097C) NO R1005P07
HPE X240 SFP+ SFP+ 5m Direct Attach Copper Cable
(JG081C) NO R1005P07
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095B) NO R1005P07
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095C)NO R1005P07
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
Cable (JD096B)NO R1005P07
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
Cable (JD096C)NO R1005P07
HPE X240 10G SFP+ SFP+ 7m Direct Attach Copper
Cable (JC784C)NO R1005P07

16
Switch or module Transceiver module (Product code)
Minimum software
release
DDM
support
Release
version
HPE FlexFabric
12900 48-port
1/10GbE SFP+ FX
Module (JG888B)
HPE X130 10G SFP+ LC SR Xcvr (JD092B) YES R1109
HPE X130 10G SFP+ LC LR Xcvr (JD094B) YES R1109
HPE X130 10G SFP+ LC ER 40km Xcvr (JG234A) YES R1109
HPE X130 10G SFP+ LC LH 80km Xcvr (JG915A) YES R1109
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097B) NO R1109
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097C) NO R1109
HPE X240 SFP+ SFP+ 5m Direct Attach Copper Cable
(JG081C) NO R1109
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095B) NO R1109
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095C) NO R1109
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
Cable (JD096B) NO R1109
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
Cable (JD096C) NO R1109
HPE X240 10G SFP+ SFP+ 7m Direct Attach Copper
Cable (JC784C) NO R1109
HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable
(JL290A) YES R2138
HPE X2A0 10G SFP+ to SFP+ 10m Active Optical
Cable (JL291A) YES R2138
HPE X2A0 10G SFP+ to SFP+ 20m Active Optical
Cable (JL292A) YES R2138
HP FlexFabric 12900
48-port 1/10GbE
SFP+ FC Module
(JG888A)
HPE X130 10G SFP+ LC SR Xcvr (JD092B)YES R1109
HPE X130 10G SFP+ LC LR Xcvr (JD094B)YES R1109
HPE X130 10G SFP+ LC ER 40km Xcvr (JG234A)YES R1109
HPE X130 10G SFP+ LC LH 80km Xcvr (JG915A)YES R1109
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097B)NO R1109
HPE X240 10G SFP+ SFP+ 3m Direct Attach Copper
Cable (JD097C)NO R1109
HPE X240 SFP+ SFP+ 5m Direct Attach Copper Cable
(JG081C)NO R1109
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095B)NO R1109
HPE X240 10G SFP+ SFP+ 0.65m Direct Attach
Copper Cable (JD095C)NO R1109
HPE X240 10G SFP+ SFP+ 1.2m Direct Attach Copper
NO R1109