HPRT MT800 User manual
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
MT800
-1- -2-
LED Indicator
Solid white light: Printer is in standby mode
Solid green light: Printer is charging – LED
Flashing red light: Ribbon has been depleted
– replace ribbon
-3- -4-
-5-
Quick Start Guide
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli
District, Xiamen, China
WEB: www.hprt.com
Packing List
Note:
the order.
2) The ribbon module comes preinstalled in
the printer.
Printer Ribbon Module
Appearance and Components
Front
Top Cover
Paper Inlet
LED
Indicator
Opening
Right Cover
Opening
Quick Start Guide
Bluetooth
Indicator
Note:
Inner
Paper Sensor
Paper Feed
Sensor
Right
Paper Feed
Sensor
Right Wing
Paper Sensor
TPH
printer cover upward.
Right Cover Opening
as a guide, and press down to install.
Right Wing
To avoid errors when loading the ribbon,
make sure the arrow d
ribbon and printer align.
NOTE:
Rewind wheel
Rewind wheel
-6-
Rewind wheel
Rewind wheel
straighten out the ribbon.
4. Close the cover. You will hear it click into place.
Loading Ribbon
-7-
(From Mobile Phone)
3 seconds, and then release it when the printer
and the printer is ready.
Paper Inlet
Note:
-8-
3. Download “H-Print” APP: Scan the QR
code below to download “H-Print” APP.
4. Connect with the printer:
1) Turn on Bluetooth on the mobile phone,
mobile app, not through the Bluetooth
devices list. Note:
the on screen steps in the app and was not required
in step 2.
2) Open the APP and select “Device
the device via APP”, and select “MT800-XXXX”
Bluetooth address)
5. Print:
1) Select
2) Press the print icon in the top right to start
-9-
℃~35℃
Storage Temperature: -5℃~45℃
NOTE:
USB Cable
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Reset
-13-
-15-
(From Computer)
1. Connect the printer to the computer:
Connect the printer to the computer via
driver on the computer.
-10-
NOTE:
The MT800 should only be charged through a
computer USB port using the provided USB
cable.
2) Choose the setup language “English” and
click “OK”.
2. Install Driver:
1) Double click the driver program.
-12-
4) Click “Finish”.
3. Loading paper: Put the paper into the paper
and the printer is ready.
Paper Inlet
printer cover is closed, or it may damage the
printer cover upward.
2. Remove the paper.
Removing Paper
NOTE:
General Q&A
responding to touch?
Remove t
Use a toothpick or pin to push down the [Reset]
the printer.
-11-
Note:
to the computer, the driver will be installed
3) Choose the matched type and port, and
click “Next”.
-14-
-16- -17- -18-
2. Does the printer require thermal paper?
serves the same purpose.
3. Does the printer require an ink cartridge?
No, but it requires ribbon.
4. Are there any supplies for the printer?
A ribbon is included, but paper is not.
5. How to purchase the ribbon?
person to purchase.
6. How many copies can one ribbon print?
reduce this page count. Note: Double-sided
Other manuals for MT800
3
Table of contents
Other HPRT Printer manuals
