HPRT TP806L User manual

Desktop POS Printer
TP806L
User Manual
Rev.1.1
Xiamen Hanin Electronic Technology Co.,Ltd.
Tel:
[phone]
Web:
www.hprt.com

CONTENT
STATEMENT............................................................................................................................................ 3
CAUTIONS............................................................................................................................................... 3
IMPORTANT SAFETY INSTRUCTIONS...................................................................................................... 4
1 OVERVIEW........................................................................................................................................... 6
1.1 Introductions............................................................................................................................ 6
1.2 The Main Features....................................................................................................................6
2 GETTING STARTED............................................................................................................................... 7
2.1 Packing List............................................................................................................................... 7
2.2 Appearance and Components..................................................................................................8
3 SPECIFICATION.................................................................................................................................. 10
3.1 Printer Specification............................................................................................................... 10
3.2 Media Specification................................................................................................................ 12
3.2.1 Continuous Thermal Paper Specification.................................................................... 12
3.3 Printing and Cutting Position................................................................................................. 13
3.3.1 Printing Position.......................................................................................................... 13
3.3.2 Cutting Position........................................................................................................... 13
4 INSTALLATION AND USAGE............................................................................................................... 14
4.1 Unpacking...............................................................................................................................14
4.2 Installation Site and Direction of Printer................................................................................14
4.3 Power Adapter Connection.................................................................................................... 14
4.4 Interface Cable Connection....................................................................................................16
4.5 Cash Drawer Connection........................................................................................................16
4.6 Paper Loading......................................................................................................................... 16
4.7 Specification of LED Indication and Beeper........................................................................... 18
4.7.1 Specification of LED Indication....................................................................................18
4.7.2 Beeper......................................................................................................................... 18
4.8 Print Self Testing ....................................................................................................................19
4.9 Printing of Windows Driver Program..................................................................................... 19
5 INTERFACE SIGNAL............................................................................................................................ 20
5.1 USB......................................................................................................................................... 20
5.2 Cash Drawer........................................................................................................................... 20
5.3 Power Connector....................................................................................................................21
5.4 Serial Interface....................................................................................................................... 21
5.5 Ethernet Interface.................................................................................................................. 22
6 TROUBLESHOOTING.......................................................................................................................... 23
6.1 Printer Not Working............................................................................................................... 23
6.2 LED Indicator On The Control Panel and Beeper Alarm.........................................................23
6.3 Troubles Occur During Printing.............................................................................................. 23
6.4 Problems Emerge During the Paper Cutting Processes......................................................... 24
6.5 Remove Jammed Paper..........................................................................................................25
7 PRINTER CLEANING AND MAINTENANCE......................................................................................... 26
7.1 Cleaning Head.........................................................................................................................26
7.2 Cleaning Sensors, Roller and/or Paper Path.......................................................................... 26

3
STATEMENT
This manual content may be altered without permission, and Xiamen Hanin Electronic Technology
Co., Ltd. reserves the rights to make changes without notice in technology, spare parts, hardware
and software of the products. If more information is needed about the products, please contact
Xiamen Hanin Electronic Technology Co., Ltd. Without any written permission from the company,
any section of this manual is prohibited to be copied or transferred in any form.
Copyright
This manual is printed in 2021, the copyright belongs to Xiamen Hanin Electronic Technology Co.,
Ltd.
Printed in China.
Version 1.1
CAUTIONS
Warnings :
This must be complied with in order to avoid any damage to the human body and to the
equipment.
This is showing the important information and tips for the printer operating.
Note: Due to the continuous improvement of the product, the specifications, fittings, parts,
designs and procedures described in the manual are subject to the actual machine without prior
notice.

TP806L User Manual
4
IMPORTANT SAFETY INSTRUCTIONS
1. Safety warning
Warnings: The print head will become very hot during printing; avoid contact with the print
head after printing has finished.
Warnings: Do not touch the printer head and connector in case static damage the printer
head.
2. Instructions
Carefully read the installation and operating instructions provided with the printer before starting
up your printer.
1) Place the printer on a flat and stable surface.
2) Leave enough space around printer for operation and maintenance.
3) Do not insert anything into the ventilation slots or openings on the printer.
4) Do not place the printer on or near a heat source.
5) Do not use the printer near water. Never spill liquid into the printer.
6) Do not expose the printer to high temperatures, direct sunlight or dust.
7) Protect the printer from shock, impact and vibration.
8) Be certain the power source is within the voltage rating and frequency listed for the printer.
9) Switch off the printer power supply when won’t use it for a long time.
10) Do not place the power cord where it can be stepped on. If the power cord becomes
damaged or frayed, replace it immediately.
11) To ensure the print quality and reliability, you are suggested to use the recommended paper
or the same quality paper.
12) Pls switch off the power supply when connect/disconnect all the ports or it will cause
damage to the printer control circuit.
13) Never carry out maintenance or repair work yourself. Always contact a qualified service
technician.
14) Keep this User Manual in a place which is easily accessible at all times.

TP806L User Manual
5
Other Precautions
The copyright for this user manual and various other manuals is property of our company. Any
copying or conversion into electronic form and saving of this material without the express written
permission is strictly prohibited. Use of the information contained in this manual is not subject to
any patent liability. This manual has been prepared with utmost care and attention to detail but
may contain certain errors and/or omissions. Our company is not legally liable for any damages
resulting from the use of the information in this manual. Our company and its affiliates are not
legally liable (United States excluded) for any damages, loss, costs, and/or expenses that result
from the breakdown, malfunction, and/or misuse of the product due to violation or neglect of the
operation and maintenance information and instructions provided by our company, as well as from
the unauthorized alteration, repair, and/or modification of the product by the user and/or third
party. We are not legally liable for any damages and/or issues resulting from the use of options
and/or parts that are not authentic or authorized products.
WEEE (Waste Electrical and Electric Equipment)
This mark shown on the product or its literature indicates that the corresponding item
should not be discarded at the end of its working life with others household waste. To
prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate marked items from other types of waste and recycle them
responsibly to promote the sustained reuse of material resources. Household users
should contact either the retailer where they purchased this product, or their local government
office for details of where and how they can conduct environmentally safe recycling of such items.
Commercial users should contact their suppliers and check the terms and conditions of purchase
contracts. This product should not be combined with other commercial waste for disposal.
Caution: This is a Class A product. In a domestic environment this product may cause radio
interference in which the user may be required to take adequate measures.

TP806L User Manual
6
1 OVERVIEW
1.1 Introductions
TP806L is a thermal receipt printer with auto-cutter, featured by high print quality, high print speed,
high stability, etc. It can be used in commercial POS system, food industry and occasions which
need real-time field print receipts.
TP806L can connect with other equipment through cash drawer, serial, USB, and Ethernet
interfaces. And the printer drivers are available for the WINDOWS XP/7/8/Vista operating system.
1.2 The Main Features
1) Patent design of unique vertical double auto cutter
2) Low noise
3) High print speed
4) Easy paper loading
5) Support page mode printing
6) Compatible with various width paper
7) Cash drawer interface
8) Communication interfaces optional

TP806L User Manual
7
2 GETTING STARTED
2.1 Packing List
After receiving your printer, please check for possible shipping damage:
1) Inspect the outside of both the box and the printer for possible damage.
2) Check whether you have received the following accessories together with the printer, if there is
any items missing, please contact with your local dealer.
Notes:
1) The power cord varies by region.
2) Some customers may require not packing some parts of the standard accessories for special, if
users are confused, please contact with your dealer for more detail.

TP806L User Manual
8
2.2 Appearance and Components

TP806L User Manual
9
Specification of some part elements
1) Power switch
Press “0” to turn off power and press “|” to turn on power supply.
2) Feed Button
Feed paper: When it’s not in the alarm status, push the button to feed paper. Push the button
continuously to feed a long distance.
3) Power LED
It indicates the power status.
4) Paper LED
It detects the status of paper, such as paper near end and paper end. See more details in”3.2
Specification of Indicated light and beeper”.
5) Error LED
If there is abnormal phenomenon and error LED flashing, it means the printer is in the wrong status.
Please turn off the power immediately.
6) Paper Guide
Use the paper guide in the paper container to meet different paper widths.
TP806L paper container has 2 paper guide slots. Paper guide slot 1 meets the 80mm width paper,
and slot 2 meets the 58mm width paper.
Warnings：
Paper guide is essential for adjusting the paper width. Please keep it properly. And the paper
guide should NOT be taken away during printing in case of print offset.

TP806L User Manual
10
3 SPECIFICATION
3.1 Printer Specification
General Specification
Item
Parameter
Printing
Parameter
Printing method
Direct thermal line printing
Resolution
Default 203 dpi, 180 dpi can be emulated
Printing width
72mm（576dots）
Printing speed
Max. 250mm/s
Print density
Adjustable from degree 1 to degree 4
Printing Direction
Vertical and horizontal
Interface
Default
Built-in USB, RS232, LAN
Auto cutter
Partial Cut
Page mode
Support
Memory
RAM
2MB
Flash
4MB
Character set
Font
Font A:12*24 Font B:9*17 CHN: 24*24
Number of Columns
48/64
Alphanumeric
95
Expanded Character
128*47
Code page
47
Graphics
Support bitmap printing with different density and user defined
bitmap printing (Max. 256K for total)
Barcode
1D
UPC-A, UPC-E, EAN8, EAN13, CODE39, ITF, CODEBAR, CODE128,
CODE93
2D
PDF417, QR code
Detection
Sensor
Paper end, cover open, over-temperature and high/low voltage
sensors
Power supply
Input
AC100V-240V 50-60HZ
Output
DC 24V±5%, 2.5A
Paper
Paper Loading
Easy-loading structure of upward open cover
Paper Type
Standard thermal paper
Paper Width
79.5±0.5mm/57.5±0.5mm (with 1" spacer)
Paper Thickness
0.056~0.1mm
Paper Roll Diameter
83mm Max.