HPRT MT53 User manual

Steps & Notes
Take out one packet of photo paper (including 5pcs or
10pcs of photo paper and 1pc of blue card), and place
them into the printer as shown on Figure 2. The photo
paper should be placed aer the blue card and its tet
side should face down.
Please note that never place more than 10pcs of photo
paper, and use the photo paper specially for the printer,
use other brands of that may aect the print uality.
Blue Card
1. If Bluetooth has been unconnected for 5 seconds, the printer will enter sleeping mode,
press the power buon to awaken it.
2. In sleeping mode, if not awaken the printer within 5 minutes, it will be o automacally.
3. When using it at the second me, ust click the print icon that the printer will be connected
automacally and send data to print.
. Do not touch the photo paper during prinng, or else it may appear stripes.
6
Hold down the power buon for 3 seconds,
the printer will be turned on.
Open the photo
printer APP.Select the printer and then click it to pair automacally.
Return to “Print Preview” aer connecon is successful.
Click the print icon and enter “Searching
printer”, allow to turn on the Bluetooth.
Start Your Photo Printer
Packing List
Note: The packing items are actually dependent on the order.
USB Interface Poer Buon
LED Indicator Status
Red LED Error Status
OFF: Power o
ON: Standby
Slow Flash: Charging
ON: Error (Paper Jam/Out of Paper
/Cover Opened)
Slow Flash: Low power
Blue LED Basic Status
LED IndicatorPaper Outlet
Paper Loading
Place your hands on both sides of the top cover,
push it towards the direcon as shown on Figure 1.
Assemble the top cover.
Precauons or Photo Paper
The photo paper is easy to get damp, please use it as soon
as possible aer opening.
Avoid ecessive direct sunlight and over low temperature.
Avoid device damage caused by using non-special paper.
Do not fold or damage the paper.
How to Print
Steps & Notes
Choose “MT53”, select the photos
and enter “Print Preview.”
Click the print icon again and
the printer will start prinng.
1. When red LED stays on, you can check the detailed error condion on APP aer connecng it to the printer.
2. When updang the printer rmware, the blue LED will ash uickly.
The blue card is used for color correcon and TPH cleaning. When prinng aer loading 1 packet of
paper at rst me, the blue card will be automacally out rstly, and then the photo will be printed out.
Type-C Cable
Photo Paper (5pcs)
Quick Start Guide
The tet side of all the photo
paper should face down.

SDoC
Xiamen Hanin Electronic Technology Co., Ltd.
ADD: 5F, 8#, Aide Airport Industrial Park, Huli District, Xiamen, China
TEL: [phone]
WEB: www.hprt.com
Scan the QR code to download APP.
APP Download
This device complies with part 15 of the FCC Rules. Operaon is subect
to the following two condions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operaon.
Any changes or modicaons not epressly approved by the party
responsible for compliance could void the user's authority to operate
the euipment.
NOTE: This euipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against
harmful interference in a residenal installaon. This euipment
generates, uses and can radiate radio freuency energy and, if not
installed and used in accordance with the instrucons, may cause
harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a
parcular installaon. If this euipment does cause harmful interference
to radio or television recepon, which can be determined by turning the
euipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separaon between the euipment and receiver.
-- Connect the euipment into an outlet on a circuit dierent
from that to which the receiver is connected.
-- Consult the dealer or an eperienced radio/T technician for help.
FCC