HTC One (E8) User manual

1. Insert the tip of the tray
eject tool (or a small bent
paperclip) into the hole
next to the nano UIM/SIM
card tray that’s on the left
side of the phone.
Push the tip all the way
into the hole until the tray
ejects, and then pull the
tray out.
2. With contacts facing
down, place a nano
UIM/SIM card into the
SIM 1 holder (supports
CDMA/3G/GSM).
Place your second nano
SIM card into the SIM 2
holder (supports GSM
only).
If the card is NFC-enabled,
it must be placed in
the SIM 1 holder to be
recognized.
Insert the tray back into
the slot.
CDMA/
3G/GSM
GSM Only
gold contacts
cut-o corner
nano SIM
microSD
Inserting your nano UIM/SIM and microSD cards
HTC One (E8) dual sim
IMPORTANT: USE A STANDARD NANO UIM/SIM ONLY.
Inserting a modified SIM may damage the card slot or
cause the card to not fit properly.

3. Use the same tray
eject tool to eject the
microSD™ card tray that’s
on the right side of the
phone. Pull the tray out.
4. Place the microSD card
(contacts facing down)
into the tray, and then
insert the tray back into
the slot.
91H0xxxx-xxM Rev.A
htc.com
© 2014 HTC Corporation. All rights reserved.
HTC, the HTC logo, and HTC One are trademarks of HTC Corporation.
All other company, product and service names mentioned herein
are trademarks, registered trademarks or service marks of their
respective owners.
Want some guidance on using your phone?
Check out our friendly walkthroughs in the Tips & Help
app on your phone. Or go to www.htc.com/support/
to find tutorials, the user guide, FAQs, latest news, and
more.