HUANUO HNCM12 User manual

V3.0
Monitor Desk Mount
Instruction Manual
Model:HNCM12
Thank you for choosing this HUANUO product! At HUANUO
we strive to provide you with the best quality products and
services in the industry. Please share your experience of our
product with others at www.huanuoav.com/reviews if you
are satisfied. Should you have any issues, please don't
hesitate to contact us.
Technical Support:
1-800-556-0533 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
[email protected] (US/CA)
Website:
www.huanuoav.com

IMPORTANT SAFETY INFORMATION
• Check package contents against Supplied Parts and Hardware List to assure
that all components were received undamaged. Do not use damaged or defective
parts. lf you require replacement parts, contact customer service at
[email protected]
• Not all parts and hardware included will be used.
• Carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact
customer service at [email protected]
• This product may contain moving parts. Use with caution.
• Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or injury
caused by improper mounting, incorrect assembly or inappropriate use.

M10
C1(1PC)
M10
C2(1PC)
M4X12MM
A1(4PCS)
M4X16MM
A2(4PCS)
L5mm
B (4PCS)
M6X12MM
C3(1PC)
M8X10MM
D(2PCS)
M6X8MM
E(2PCS)
Large Allen Key
F1(1PC)
Small Allen Key
F2(1PC)
a(1PC) b(1PC) (1PC)
c
F (1PC)
M6X16MM
Tools Needed (Not Included)
Supplied Parts and Hardware
STEP 1 Install the Base
1
Phillips Screwdriver
F2
E
C3
D
F1
Option A：
C-Clamp Installation

2
STEP 1A Install the Base(C Clamp Mount Option)
b
C1
C2
a
b
b
Desk Thickness
2 11/64 in(55mm) - 3 5/32 in.(80mm)
Desk Thickness
1 3/16 in.(30mm) - 2 11/64 in(55mm)
Desk Thickness
3/8 in.(10mm) - 1 3/16 in.(30mm)
Option B：Grommet Installation

Phillips
Screwdriver
(Not Included)
75x75mm
100x100mm
A1
B
75x75mm
100x100mm
A2
Flat back monitor Round back monitor
STEP 2 Secure Monitor Connector to Pole Assembly
STEP 3 Attach VESA Plate to the Back of Monitor
3
c
F1
100x100mm=3 15/16x3 15/16in.
75x75mm=2 61/64x2 61/64in.

STEP 4 Hang the Monitor to the Monitor Connector
4
FF2
2X Cable tie
Height Adjustment
F1
Tilt Adjustment
STEP 5 Adjust the Tilt Angle and Manage the Cables

All of us at HUANUO do appreciate your product purchase. We hope that you
are as happy with your product as we are designing and manufacturing it for
you. We strive to provide you with the best quality products and services in
the industry. If you have any questions please don't hesitate to contact us at
[email protected] (US/CA)
Thank you again
for choosing this Huanuo product!