Huawei Ascend G610 User manual

Quick Start Guide
G610

Dual-Card Dual-Standby
Your mobile phone supports dual-card dual-standby
mode, which can significantly reduce power consumption
and increase your phone's standby time. Note that two
restrictions exist:
• When you make calls using one SIM card, the other
SIM card is disabled.
For example, when you make calls using SIM card 1,
SIM card 2 cannot be used to answer calls or access
the Internet. If someone calls SIM card 2, the caller will
hear a voice message like "The subscriber you dialed is
out of the service zone" or "The subscriber you dialed
is not able to answer your call, please try again later."
This is because your mobile phone cannot access the
network with both SIM cards at the same time and has
nothing to do with your service provider's network
condition. It is recommended that you subscribe to
services such as voicemail or missed-call reminders
from your service provider to avoid the inconvenience
caused by missed calls.
• When you are using one SIM card's data services, you
can receive calls and messages using the other SIM
card, but data services will be interrupted.
For example, when SIM card 1's data services are in
use, you can use SIM card 2 for calling and messaging,
but SIM card 1's data services will be interrupted as a
result. When the call using SIM card 2 is terminated, or
the message is received or sent, you can resume using
SIM card 1's data services.

Getting to know your phone
Thank you for choosing the HUAWEI smartphone.
First, let's take a look at a few basics.
Press and hold the power button to power on your
phone. After your phone is powered on, you can use the
power button to turn the screen off and on.
Front
camera
Earpiece
Status
indicator
Back Menu Home
Power
button
Volume
key

Preparing your phone
To insert a SIM card, the battery and a microSD card,
please perform the few steps shown in the following
figures.
Your phone is shipped with the battery partially charged.
It is recommended that you fully charge the battery
before using it for the first time.
1 2
3
5
4
6
GSM
WCDMA
/GSM
Remove the battery
cover Insert the SIM card
Insert the microSD card
(optional)
Installing the battery
Close the battery cover Charging the battery
a
b

Dual-Card Management
Your mobile phone supports access to both WCDMA and
GSM networks. Follow the onscreen instructions or the
quick start guide to install SIM cards.
1. Touch .
2. Touch SIM card management to activate the SIM
cards.
10:30

Locking and unlocking the screen
When you are not using your phone, press the power
button to turn off the screen.
After being idle for a specified period of time, your phone
automatically locks its screen.
Follow the onscreen instructions and drag to unlock
the screen or open an application.
10:30

Personalizing your Home screen
The unique Me Widget can group widgets that you often
use. You can touch an icon to open a widget.
Touch and hold Me Widget until your phone vibrates,
then release your finger and touch
Touch to customize
to customize your Me Widget.
10:30
Me Widget
Status bar
Display area

Managing contacts
Touch to open People .
Touch the tab page to group your contacts for easier
management.
Create
contact
10:30

Making a call
Touch to open the dialer.
You can dial a phone number directly or touch to
choose a contact.
You can also touch a phone number in places like
messages, email and webpages to make a call.
To answer an incoming call, drag to .
10:30

Sending messages
Touch to open Messaging .
Adding a photo or audio clip to a text message turns it
into a multimedia message.
You can also save attachments from multimedia
messages.
Attach file
Happy birthday!
10:30