Huawei C203S User manual

Copyright © 2007 Huawei Technologies Co., Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any
form or by any means without prior written consent of Huawei
Technologies Co., Ltd.
Trademarks
and other Huawei trademarks are the trademarks or
registered trademarks of Huawei Technologies Co., Ltd. in the
People’s Republic of China and certain other countries.
All other trademarks mentioned in this manual are the property
of their respective holders.
Notice
The information in this manual is subject to change without
notice. Every effort has been made in the preparation of this
manual to ensure accuracy of the contents, but all statements,
information, and recommendations in this manual do not
constitute the warranty of any kind, express or implied.

i
Table of Contents
1 Getting to Know Your Phone..............................................1
2 Menu Tree.............................................................................4
3 Getting Started.....................................................................5
4 Text Input..............................................................................7
5 Warnings and Precautions...............................................10

1
1 Getting to Know Your Phone
Your Phone

2
Note zThere are two C203s models. One has a removable
user identity module (R-UIM) and the other does not.
zThis manual describes the C203s with the R-UIM. If
a function is marked with "'", it indicates that this
function is only available in the C203s with the
R-UIM. But the remaining functions are supported by
both the C203s models.
Appearance Descriptions
1 Earpiece –
2 Screen –
Press to write message.
Press to access the inbox.
Press to set the alarms.
3 Navigation keys
Press to view the calendar.
4 Soft keys zWhen the phone is closed, press
and to enable or
disable the keyguard.
zSelect the option displayed on the
lower left corner of the screen.
5 OK key Confirm a selection or display a menu.
zAccess the Call History screen.
6 Dialing key
zMake or answer a call.
zPower on or off the phone (by
pressing and holding it).
7 End/Power key
zEnd or reject a call.

3
zPress and hold to access
Voice Mail.
zPress and hold 2–9to speed dial a
phone number.
8 Number keys
zPress and hold 0to input +
9 * key Enable or disable the vibration mode
(by pressing and holding it).
10 # key Enable the phone lock (by pressing
and holding it).
11 Speaker –
12 Charger interface –
Screen Icons
Icon Meaning Icon Description
Signal strength Battery level
Non-service Roaming
New Message Vibration
Alarm clock

4
2 Menu Tree
Messages Phone Book Call History
1 Write Message
2 Inbox
3 Outbox
4 Voice Mail
5 Delete
6 Msg Settings
1 Search
2 New
3 Groups
4 Speed Dial
5 Delete
6 Options
1 Missed Calls
2 Received Calls
3 Dialed Calls
4 Delete
5 Call Duration
Extras Sound Settings
1 Alarm
2 Calculator
3 Calendar
4 Game
5 Time Zones
6 SW Version
1 Volume
2 Ring Type
3 Ring Tones
4 Alarm Tones
5 Key Tones
6 Keybeep Length
7 Power Up
8 Power Down
9 SMS Recv. Tone
10 SMS Send Tone
1 Display
2 Time
3 Call Settings
4 Phone Settings
5 Security
6 Auto Key Guard
7 Factory Set.
8 Privacy

5
3 Getting Started
Installing the Battery
To install the battery, do as follows.
1
2
3
Removing the Battery
To remove the battery, do as follows.
1
2
"'"Installing/Removing the UIM Card
After removing the battery, do as follows to install or remove the
UIM card.
Charging the Battery
1. Connect the charger to the charger interface at the bottom of
your phone. Make sure that the arrow on the charger

6
connector faces the front side of the phone.
2. Connect the charger to a power socket.
3. The phone starts charging. The screen displays the charging
animation.
4. When the animation becomes static, disconnect the charger
from the power socket.
5. Disconnect the charger from the phone. Press the gray
buttons on both sides of the charger connector, and then pull
it out from the charger interface.
Accessing a Menu
1. In the standby mode, press to display the main menu.
2. Press to select a function menu.
3. Press to display the selected menu.
4. Press to select a submenu and press to display it.
5. Press to return to the previous menu or exit the
function menu.
6. Press to return to the standby screen.
Making a Call
1. In the standby mode, press the number keys to enter a phone
number.
2. Press to dial the number.
3. Press to end the call or cancel the dialing.