Huawei B315s User manual

Huawei B315s
Quick Start Guide

1
Warning: This equipment may not work when main
power fails.
1 x Modem
(SIM Card included)
1 x Ethernet Cable
1 x Troubleshooting Guide
1 x Power Pack
1 x Quick Start Guide
1 x Safety Information
What’s in the box?

2
Step 1 –Power on your device
Follow the below diagram to plug your power pack
into the back of the modem.
Handy Hint: To get the best signal, the ideal place
for your device will be near a window. Try a few
different areas until you find one with the best
signal strength.
Simply Plug and Play

3
Step 2 - Connect your device to the modem
Once your device has successfully turned on, your
modem lights will now look like the following. This
means you are ready to connect a device to the
modem via either the Ethernet cable or via Wi-Fi.

4
Ethernet Cable
Plug the supplied Ethernet cable into the back of
the modem and into your computer.
A light will now appear on the LAN indicator of the
modem.
Open a web browser and the modem will take you
to the activation portal.
OR

5
Wi-Fi
Switch on Wi-Fi on your device.
The wireless network “Huawei B315 - xxxx”will now
appear and click this.
®
®
™
®
®
®

6
Turn the Modem over and enter in the Wi-Fi key.
Open a web browser and the modem will take you
to the activation portal.
Handy Hint:
For best internet performance we recommend you only
use a couple of Wi-Fi enabled devices at a time. The
maximum number of devices this modem can support is
32.

7
Step 3 –Activate and Set up an account
You now are at the final step of connecting to the
internet.
In the activation portal follow the steps to confirm
your account and finalise activation.
Once completed you are ready to start browsing,
happy surfing.

8
1.
Power
indicator
On: the Modem is powered on.
Off: the Modem is powered off.
2.
4G
indicator
Steady blue: You are connected
to the network.
Steady red:
The SIM card is not recognized
Failed to connect.
Getting to know your Modem

9
3.
Wi-Fi/WPS
indicator
Steady on: Wi-Fi turned on.
Blinking: a WPS connection is
being set up.
Off: Wi-Fi turned off.
4.
LAN/WAN
indicator
Steady on:
At least one of the LAN ports is
connected to a device.
WAN port is connected to an
Ethernet port.
Blinking: data is being transmitted
through a LAN port or the WAN
port.
Off:
No device is connected to a LAN
port.
WAN port is not connected to an
Ethernet port.
5.
4G Signal
strength
indicator
On: Shows network signal
strength. A full light means a
strong signal.
Off: No network signal.
6.
SIM card
slot
A SIM card is already installed in
this device.
7.
External
antenna
port
Connect to external antennas
after removing the cover (not
included).

10
8.
WPS button
To access your wireless network
without entering in your Wi-Fi
key, press and hold for 2 or more
seconds until is blinking to
active WPS connection when Wi-
Fi is turned on.
9.
Power
button
Press and hold for about 3
seconds to power the Modem on
or off.
10.
Reset
button
When the Modem is powered on,
use a sharply pointed object to
press and hold for about 3
seconds.
Restoring the default settings of
the Modem will erase all previous
settings.
11.
Power port
Connect to compatible power
adapter.
12.
LAN port
Connect to computer or other
network devices.
13.
LAN4/WAN
port
Working as a LAN port when
connected to a computer, switch,
or other LAN device.

11
14.
USB port
Connect to a USB storage device,
or USB printer. This port cannot
be connected to USB host devices
such as computers.
The Modem supports USB
1.0/USB 2.0 storage devices in
FAT32 format of up to 32 GB.
Storage devices with power
supply requirements exceeding
USB standards may not work
properly. It is recommended that
you prepare an external power
supply in these cases.
The Modem is compatible with
samba-supported USB printers.
15.
Telephone
port
This function is not available at
this time.

12
For best internet performance we recommend you only
use a couple of Wi-Fi enabled devices at a time. The
maximum number of devices this modem can support is
32.
The Modems’ default Wi-Fi security setting is
WPA2-PSK, however you can change this to other
less secure settings in the admin console of the
modem.
The modem and SIM card for this device are made
for each other and will refuse to work with any
other devices or SIM cards.
Where to put your Modem
To get the best signal, the ideal place for your
device will be near a window. Try a few different
areas until you find one with the best signal
strength.
Things that can affect your signal strength
Concrete or wooden walls can weaken the
transmission of wireless signals, as well as electrical
appliances that project strong electric or magnetic
Useful Tips

13
fields such as microwave ovens, refrigerators and
satellite antennas. Best keep away from them if
possible.
Login to your admin console on a web browser and
type in 192.168.0.1 (the default username is admin,
and the default password is admin)to find out the
performance of your network connection.

14
Check the light indicators resemble those below when
the modem is powered on.
Power
On: the Modem is powered on.
Off: the Modem is powered off.
4G
Steady blue: You are connected to the
vividwireless network
Steady red:
The SIM card is not recognized
Failed to connect
Wi-Fi/
WPS
Steady on: Wi-Fi turned on.
Blinking: a WPS connection is being set up.
Off: Wi-Fi turned off.
Troubleshooting Guide

15
LAN/
WAN
Steady on:
At least one of the LAN ports is connected
to a device.
WAN port is connected to an Ethernet
port.
Blinking: data is being transmitted through
a LAN port or the WAN port.
Off:
No device is connected to a LAN port.
WAN port is not connected to an Ethernet
port.
4G
Signal
On: Shows network signal strength. A full
light means a strong signal.
Off: No network signal.

16
1. How do I find out the performance of my network
connection?
Login to your admin console on a web browser and type
in 192.168.0.1 to find out the performance of your
network connection.
IMSI
This is your SIM card number.
WAP IP
Address
This is your public IP address.
CELL_ID
This number represents what base
station you are connected to.
RSSI
The strength of my modems wireless
broadband signal.
SINR
The quality of traffic signal coming from
the base station that serves my device.
The lower the number the more
interference I have.

17
2. What is the best network performance value for
my device?
We use network performance values such as SINR and
others to establish the best location and conditions for
your device.
To locate these other values please visit the “Device
Information” section under Settings in the admin
console of your modem.
We encourage you to move your device around your
home to find out the best location to give you the best
performance.
Network Performance
RSRP
(dBM)
RSRQ
(dB)
SINR
(dB)
Excellent
> = -80
> = -10
> = 20
Good
-80 to -95
-10 to -15
13 to 20
Moderate
-95 to -110
-15 to -20
0 to 13
Poor
< = -110
< -20
< = 0

18
Hints for best device location in your house:
On a window sill.
Away from other electrical devices.
Away from other radio devices.
To help troubleshoot your device performance
further please phone our call centre on 1300 327
837.
Further Assistance