Huawei UPS5000-E-180 kVA User manual

UPS5000-E-180 kVA
User Manual (Integrated UPS, 30
kVA Power Modules)
Issue 05
Date 2024-01-30
HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.

Copyright © Huawei Digital Power Technologies Co., Ltd. 2024. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Digital Power Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei
Digital Power Technologies Co., Ltd. and the customer. All or part of the products, services and features
described in this document may not be within the purchase scope or the usage scope. Unless otherwise
specied in the contract, all statements, information, and recommendations in this document are
provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Digital Power Technologies Co., Ltd.
Address: Huawei Digital Power Antuoshan Headquarters
Futian, Shenzhen 518043
People's Republic of China
Website: https://digitalpower.huawei.com
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. i

About This Document
Purpose
This document describes the UPS5000-E-180K-HABBS (UPS for short) in terms of
its overview, technical specications, installation, cable connections, power-on
commissioning, and maintenance.
Figures provided in this document are for reference only.
Intended Audience
This document is intended for:
● Technical support engineers
● Hardware installation engineers
● Commissioning engineers
● Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are dened as follows.
Symbol Description
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if
not avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) About This Document
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. ii

Symbol Description
Supplements the important information in the main text.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.
Change History
Issue Date Description
05 2024-01-30 Updated 4.5 Sealing Cabinets.
Updated 2.3.4.3 Monitoring Interface
Card (MUS05A).
04 2023-08-25 Updated the description about battery
specications.
03 2023-07-13 ● Added the branch short-circuit current.
● Added the overvoltage level and
short-circuit output capabilities.
● Added the inverter short-circuit output
capability.
● Deleted the year of safety compliance.
● Deleted the description of re
prevention and control in the battery
room.
● Added the description of battery
parameters.
● Added the precautions in the
"Monitoring Interface Card" section.
● Updated the FE and RS485 interface
protocols.
● Added the procedure for removing
desiccant in the "Power-On" section.
● Added steps and precautions for
removing the dust cover in the
"Sealing the Cabinet" section.
● Added the dust cover check in the
"Verifying the Installation" section.
● Added the description of installing
EPO cables.
● Added the no-load loss and power
distribution system items.
● Updated the "Maintenance" section.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) About This Document
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. iii

Issue Date Description
02 2022-12-30 ● Updated the content about parts
replacement.
● Updated the description about initial
startup.
01 2021-10-18 This issue is the rst ocial release.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) About This Document
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. iv

Contents
About This Document................................................................................................................ ii
1 Safety Information.................................................................................................................. 1
1.1 Personal Safety.........................................................................................................................................................................2
1.2 Equipment Safety.................................................................................................................................................................... 4
1.2.1 UPS Safety.............................................................................................................................................................................. 4
1.2.2 Battery Safety........................................................................................................................................................................ 5
1.3 Electrical Safety..................................................................................................................................................................... 11
1.4 Environmental Requirements........................................................................................................................................... 15
1.5 Mechanical Safety.................................................................................................................................................................17
2 Product Overview..................................................................................................................23
2.1 Model Description................................................................................................................................................................ 23
2.2 Working Principle..................................................................................................................................................................24
2.2.1 Conceptual Diagram.........................................................................................................................................................24
2.2.2 Working Modes.................................................................................................................................................................. 24
2.2.2.1 Normal Mode.................................................................................................................................................................. 24
2.2.2.2 Bypass Mode.................................................................................................................................................................... 25
2.2.2.3 Battery Mode................................................................................................................................................................... 26
2.2.2.4 Maintenance Bypass Mode.........................................................................................................................................27
2.2.2.5 ECO Mode......................................................................................................................................................................... 28
2.3 Product Introduction............................................................................................................................................................ 29
2.3.1 Product Structure............................................................................................................................................................... 29
2.3.2 Power Module.................................................................................................................................................................... 31
2.3.3 Bypass Module................................................................................................................................................................... 33
2.3.4 Control Module.................................................................................................................................................................. 34
2.3.4.1 ECM (ECU01A)................................................................................................................................................................ 35
2.3.4.2 Dry Contact Card (MUE05A)......................................................................................................................................36
2.3.4.3 Monitoring Interface Card (MUS05A).................................................................................................................... 41
2.3.5 MDU....................................................................................................................................................................................... 45
3 Technical Specications....................................................................................................... 48
4 Installation and Cable Connection....................................................................................55
4.1 Installation Preparations.................................................................................................................................................... 55
4.1.1 Tools....................................................................................................................................................................................... 55
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) Contents
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. v

4.1.2 Site.......................................................................................................................................................................................... 59
4.1.2.1 UPS Dimensions............................................................................................................................................................. 60
4.1.2.2 Installation Environment............................................................................................................................................. 62
4.1.2.3 Installation Clearances................................................................................................................................................. 62
4.1.3 Preparing Power Cables.................................................................................................................................................. 62
4.1.4 Transportation, Unpacking, and Checking................................................................................................................ 66
4.2 Installing a Single UPS........................................................................................................................................................ 68
4.2.1 Installing a UPS Cabinet..................................................................................................................................................69
4.2.2 Installing a Tail Frame..................................................................................................................................................... 72
4.2.3 Installing Batteries............................................................................................................................................................ 77
4.2.4 UPS Cable Connection Reference.................................................................................................................................78
4.2.5 Routing Power Cables...................................................................................................................................................... 79
4.2.6 Connecting Communications Cables.......................................................................................................................... 84
4.2.6.1 Connecting a Remote EPO Switch........................................................................................................................... 84
4.2.6.2 Connecting a Communications Cable to a Northbound Device.................................................................... 85
4.2.6.3 (Optional) Connecting the SmartLi Communications Cable.......................................................................... 86
4.3 (Optional) Combining Cabinets....................................................................................................................................... 88
4.4 Verifying the Installation.................................................................................................................................................... 89
4.5 Sealing Cabinets.................................................................................................................................................................... 92
5 Power-On and Commissioning........................................................................................... 94
5.1 Check Before Commissioning........................................................................................................................................... 94
5.2 Powering On and Starting the UPS................................................................................................................................ 94
5.2.1 Power-On............................................................................................................................................................................. 95
5.2.2 Initial Startup...................................................................................................................................................................... 95
5.2.3 Mode Settings..................................................................................................................................................................... 97
5.2.3.1 Setting ECO Mode......................................................................................................................................................... 97
5.2.3.2 Setting Hibernation Mode.......................................................................................................................................... 99
5.2.3.3 Transferring to Bypass Mode................................................................................................................................... 100
5.2.4 Starting the Inverter.......................................................................................................................................................100
5.2.5 Powering On Loads........................................................................................................................................................ 100
5.3 Shutting Down and Powering O the UPS............................................................................................................... 101
6 Maintenance.........................................................................................................................104
6.1 UPS Maintenance............................................................................................................................................................... 106
6.2 Lead-Acid Battery Maintenance.................................................................................................................................... 110
6.3 Testing Batteries..................................................................................................................................................................115
6.3.1 Lead-Acid Battery Test.................................................................................................................................................. 115
6.3.1.1 Forced Equalized Charging Test.............................................................................................................................. 116
6.3.1.2 Shallow Discharge Test.............................................................................................................................................. 117
6.3.1.3 Capacity Test................................................................................................................................................................. 118
6.3.2 Lithium Battery Test....................................................................................................................................................... 119
6.3.2.1 Shallow Discharge Test.............................................................................................................................................. 119
6.3.2.2 Capacity Test................................................................................................................................................................. 120
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) Contents
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. vi

7 Troubleshooting...................................................................................................................122
8 Parts Replacement..............................................................................................................125
8.1 Replacing an MCCB........................................................................................................................................................... 125
8.2 Replacing a Fuse................................................................................................................................................................. 130
8.3 Replacing an Indicator...................................................................................................................................................... 132
9 FAQ......................................................................................................................................... 134
9.1 Cold-Starting the UPS Using Batteries........................................................................................................................134
9.2 Transferring to Maintenance Bypass Mode............................................................................................................... 135
9.3 Transferring from Maintenance Bypass Mode to Normal Mode....................................................................... 136
9.4 EPO.......................................................................................................................................................................................... 136
9.5 Clearing the EPO State..................................................................................................................................................... 137
9.6 Downloading Data............................................................................................................................................................. 138
A Power Distribution Silkscreen Description................................................................... 139
B Acronyms and Abbreviations........................................................................................... 140
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) Contents
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. vii

1 Safety Information
Statement
Before transporting, storing, installing, operating, using, and/or maintaining
the equipment, read this document, strictly follow the instructions provided
herein, and follow all the safety instructions on the equipment and in this
document. In this document, "equipment" refers to the products, software,
components, spare parts, and/or services related to this document; "the Company"
refers to the manufacturer (producer), seller, and/or service provider of the
equipment; "you" refers to the entity that transports, stores, installs, operates,
uses, and/or maintains the equipment.
The Danger, Warning, Caution, and Notice statements described in this
document do not cover all the safety precautions. You also need to comply with
relevant international, national, or regional standards and industry practices. The
Company shall not be liable for any consequences that may arise due to
violations of safety requirements or safety standards concerning the design,
production, and usage of the equipment.
The equipment shall be used in an environment that meets the design
specications. Otherwise, the equipment may be faulty, malfunctioning, or
damaged, which is not covered under the warranty. The Company shall not be
liable for any property loss, personal injury, or even death caused thereby.
Comply with applicable laws, regulations, standards, and specications during
transportation, storage, installation, operation, use, and maintenance.
Do not perform reverse engineering, decompilation, disassembly, adaptation,
implantation, or other derivative operations on the equipment software. Do not
study the internal implementation logic of the equipment, obtain the source code
of the equipment software, violate intellectual property rights, or disclose any of
the performance test results of the equipment software.
The Company shall not be liable for any of the following circumstances or
their consequences:
● Equipment damage due to force majeure such as earthquakes, oods,
volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,
typhoons, hurricanes, tornadoes, and extreme weather conditions
● Operation beyond the conditions specied in this document
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 1

● Installation or use in environments that do not comply with international,
national, or regional standards
● Installation or use by unqualied personnel
● Failure to follow the operation instructions and safety precautions on the
product and in the document
● Unauthorized modications to the product or software code or removal of the
product
● Damage caused during transportation by you or a third party authorized by
you
● Storage conditions that do not meet the requirements specied in the product
document
● Failure to comply with local laws, regulations, or related standards due to the
materials and tools prepared by you
● Damage caused by your or a third party's negligence, intentional breach,
gross negligence, or improper operations or damage not caused by the
Company
1.1 Personal Safety
D ANGER
Do not work with power on during installation. Do not install or remove a cable
with power on. Transient contact between the core of the cable and the conductor
will generate electric arcs or sparks, which may cause a re or personal injury.
D ANGER
Non-standard and improper operations on the energized equipment may cause
re or electric shocks, resulting in property damage, personal injury, or even death.
D ANGER
Before operations, remove conductive objects such as watches, bracelets, bangles,
rings, and necklaces to prevent electric shocks.
D ANGER
During operations, use dedicated insulated tools to prevent electric shocks or short
circuits. The insulation and voltage resistance must comply with local laws,
regulations, standards, and specications.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 2

WARNING
During operations, wear personal protective equipment such as protective
clothing, insulated shoes, goggles, safety helmets, and insulated gloves.
Figure 1-1 Personal protective equipment
General Requirements
● Do not stop protective devices. Pay attention to the warnings, cautions, and
related precautionary measures in this document and on the equipment.
● If there is a likelihood of personal injury or equipment damage during
operations, immediately stop, report the case to the supervisor, and take
feasible protective measures.
● Do not power on the equipment before it is installed or conrmed by
professionals.
● Do not touch the power supply equipment directly or with conductors such as
damp objects. Before touching any conductor surface or terminal, measure
the voltage at the contact point to ensure that there is no risk of electric
shock.
● Do not touch a running fan with your hands, components, screws, tools, or
boards. Otherwise, personal injury or equipment damage may occur.
● In the case of a re, immediately leave the building or the equipment area
and activate the re alarm or call emergency services. Do not enter the
aected building or equipment area under any circumstances.
Personnel Requirements
● Only professionals and trained personnel are allowed to operate the
equipment.
– Professionals: personnel who are familiar with the working principles and
structure of the equipment, trained or experienced in equipment
operations and are clear of the sources and degree of various potential
hazards in equipment installation, operation, maintenance
– Trained personnel: personnel who are trained in technology and safety,
have required experience, are aware of possible hazards on themselves in
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 3

certain operations, and are able to take protective measures to minimize
the hazards on themselves and other people
● Personnel who plan to install or maintain the equipment must receive
adequate training, be able to correctly perform all operations, and understand
all necessary safety precautions and local relevant standards.
● Only qualied professionals or trained personnel are allowed to install,
operate, and maintain the equipment.
● Only qualied professionals are allowed to remove safety facilities and inspect
the equipment.
● Personnel who will perform special tasks such as electrical operations,
working at heights, and operations of special equipment must possess the
required local qualications.
● Only authorized professionals are allowed to replace the equipment or
components (including software).
● Only personnel who need to work on the equipment are allowed to access
the equipment.
1.2 Equipment Safety
1.2.1 UPS Safety
General Requirements
NO TICE
This is a category C3 UPS product for commercial and industrial application in the
second environment − installation restrictions or additional measures may be
needed to prevent disturbances.
● The UPS is used for commercial and industrial purposes only. It cannot be
used as a power supply for life support devices.
● For power supply systems that are critical to signicant economic interests or
public order, such as the national computing center, emergency command
center, railway signal system and control center, civil aviation and air trac
control center, airport command center, nancial clearing center, and
transaction center, the Tier 4 or 3 power architecture specied in TIA-942
must be used. That is, two power supplies must be used to supply power to
loads.
● The UPS operating environment must meet the requirements for the climate
indicator, mechanically active substance indicator, and chemically active
substance indicator specied by ETSI EN 300 019-1 class 3.6.
● The UPS shall not be located in non-conned environments within 0–3.7 km
away from the ocean or indoor or semi-indoor environments where the
temperature and humidity are not controllable, such as shelters, civil houses,
garages, corridors, and direct ventilation cabinets near the ocean; or houses
with only roofs, railway station platforms, gymnasiums, and aquariums.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 4

● It is recommended that the UPS be powered on as soon as possible after it is
unpacked.
● The UPS can be used to serve resistive-capacitive loads, resistive loads, and
micro-inductive loads. It is recommended that the UPS not be used for pure
capacitive loads, pure inductive loads, or half-wave rectication loads. The
UPS does not apply to regeneration loads.
● The UPS can be congured with a backfeed protection dry contact to work
with an external automatic circuit breaker, preventing the voltage from
owing back to input terminals over static bypass circuits. If the installation
and maintenance personnel do not need backfeed protection, attach labels on
external mains and bypass input switches, informing that the UPS is
connected to a backfeed protection card. Disconnect the backfeed protection
card from the UPS before operating the UPS.
● The upstream power distribution of the UPS must meet the requirements of
protection against electric shock specied in IEC 60364-4-41.
● A circuit breaker equipped with a residual current device (RCD) is not
recommended.
● If the root mean square (RMS) of a phase voltage of the utility power exceeds
320 V AC, the UPS may be damaged.
● To ensure power supply to loads during UPS upgrade, set the output to
maintenance bypass mode. To avoid power failure or load damage, ensure
that the bypass input is within the specied power supply range.
● Exercise caution when manually shutting down the UPS inverter for
transferring to bypass mode, or when adjusting the UPS output voltage level
or output frequency. Doing so may aect the power supply to equipment.
1.2.2 Battery Safety
D ANGER
Do not connect the positive and negative poles of a battery or battery string
together. Otherwise, the battery may be short-circuited. Battery short circuits can
generate high instantaneous current and releases a large amount of energy, which
may cause battery leakage, smoke, ammable gas release, thermal runaway, re,
or explosion. To avoid battery short circuits, do not maintain batteries with power
on.
D ANGER
Do not expose batteries at high temperatures or around heat sources, such as
scorching sunlight, re sources, transformers, and heaters. Battery overheating
may cause leakage, smoke, ammable gas release, thermal runaway, re, or
explosion.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 5

D ANGER
Protect batteries from mechanical vibration, falling, collision, punctures, and
strong impact. Otherwise, the batteries may be damaged or catch re.
D ANGER
To avoid leakage, smoke, ammable gas release, thermal runaway, re, or
explosion, do not disassemble, alter, or damage batteries, for example, insert
foreign matter into batteries, squeeze batteries, or immerse batteries in water or
other liquids.
D ANGER
There is a risk of re or explosion if the model of the battery in use or used for
replacement is incorrect. Use a battery of the model recommended by the vendor.
D ANGER
Battery electrolyte is toxic and volatile. Do not get contact with leaked liquids or
gases in the case of battery leakage or emission of abnormal odor. In such cases,
stay away from the battery and contact professionals immediately. Professionals
shall wear safety goggles, rubber gloves, gas masks, and protective clothing,
power o the equipment, remove the battery, and contact technical engineers.
D ANGER
A battery is an enclosed system and will not release any gases under normal
operations. If a battery is used improperly, for example, burnt, needle-pricked,
squeezed, struck by lightning, overcharged, or subject to other adverse conditions
that may cause battery thermal runaway, the battery may be damaged or an
abnormal chemical reaction may occur inside the battery, resulting in electrolyte
leakage or release of gases such as CO and H2. To prevent re or equipment
corrosion, ensure that ammable gases are properly exhausted.
D ANGER
The gases generated by a burning battery may irritate your eyes, skin, and throat.
Take protective measures.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 6

WARNING
Install batteries in a dry area. Do not install them below areas prone to water
leakage, such as air conditioner vents, ventilation vents, feeder windows of the
equipment room, or water pipes. Ensure that no liquid enters the equipment to
prevent faults or short circuits.
WARNING
Before installing and commissioning batteries, prepare re ghting facilities, such
as re sand and carbon dioxide re extinguishers, according to construction
standards and regulations. Before putting the battery room into operation, ensure
that it is equipped with a re extinguishing system that complies with local laws
and regulations, has been constructed and commissioned, and can work in
automatic or manual control mode.
WARNING
Before unpacking, storage, and transportation, ensure that the packing cases are
intact and correctly placed according to the labels on the packing cases. Do not
place a battery upside down or vertically, lay it on one side, or tilt it. Stack the
batteries according to the stacking requirements on the packing cases. Ensure that
the batteries do not fall or get damaged. Otherwise, they will need to be scrapped.
WARNING
After unpacking batteries, place them in the required direction. Do not place a
battery upside down or vertically, lay it on one side, tilt it, or stack it. Ensure that
the batteries do not fall or get damaged. Otherwise, they will need to be scrapped.
WARNING
Tighten the screws on copper bars or cables to the torque specied in this
document. Periodically conrm whether the screws are tightened, check for rust,
corrosion, or other foreign objects, and clean them up if any. Loose screw
connections will result in excessive voltage drops and batteries may catch re
when the current is high.
WARNING
After batteries are discharged, charge them in time to avoid damage due to
overdischarge.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 7

WARNING
If the electrolyte leaks, absorb and neutralize the electrolyte immediately. Exercise
caution when moving or handling a lead-acid battery with electrolyte leakage to
avoid electrolyte hazards.
WARNING
Lead-acid batteries in use emit ammable gas. Ensure that batteries are installed
in a well-ventilated area and reproof measures are taken.
WARNING
Do not use unsealed lead-acid batteries.
Statement
The Company shall not be liable for any battery damage, personal injury,
death, property loss, and/or other consequences caused by the following
reasons:
● Force majeure such as earthquakes, oods, volcanic eruptions, debris ows,
lightning strikes, res, wars, armed conicts, typhoons, hurricanes, tornadoes,
and other extreme weather conditions
● The battery warranty period has expired.
● Actions that do not follow instructions in the user manual or direct advice
from the Company, including but not limited to the following scenarios:
– The onsite equipment operating environment or external power
parameters do not meet the environment requirements for normal
operation, for example, the actual operating temperature of batteries is
too high or too low, or the power grid is unstable and experiences
outages frequently.
– Batteries are dropped or incorrectly operated or connected.
– Batteries are overdischarged due to delayed acceptance or power-on after
battery installation.
– Battery running parameters are incorrectly set.
–Dierent types of batteries, for example, batteries of dierent brands or
rated capacities, are used together without prior approval from the
Company.
– Batteries are frequently overdischarged due to improper battery
maintenance.
– Battery use scenarios are changed without prior approval from the
Company.
– Battery maintenance is not performed according to the instructions in the
user manual, for example, failing to check battery terminals regularly.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 8

– Batteries are not transported, stored, or charged according to the
instructions in the user manual.
– Instructions from the Company are not followed during battery relocation
or reinstallation.
General Requirements
NO TICE
This is a category C3 battery product for commercial and industrial application in
the second environment − installation restrictions or additional measures may be
needed to prevent disturbances.
NO TICE
To ensure battery safety and battery management accuracy, use batteries provided
by the Company. The Company is not responsible for any faults of batteries
provided by other vendors.
● Before installing, operating, and maintaining batteries, read the battery
vendor's instructions and comply with their requirements. The safety
precautions specied in this document are highly important and require
special attention. For additional safety precautions, see the instructions
provided by the battery vendors.
● Use batteries within the specied temperature range. When the ambient
temperature of the batteries is lower than the allowed range, do not charge
the batteries to prevent internal short circuits caused during low-temperature
charging.
● Do not reversely connect the positive and negative battery terminals.
Otherwise, a battery alarm will be generated and batteries may be damaged.
● To prevent dust buildup that may damage the equipment, install battery
modules after dust-prone operations in the equipment room are completed.
● Before unpacking batteries, check whether the packaging is intact. Do not use
batteries with damaged packaging. If any damage is found, notify the carrier
and manufacturer immediately.
● Do not unpack batteries in an environment where the temperature and
humidity are uncontrollable. Before unpacking batteries, keep them still for 24
hours in an environment where the temperature and humidity are under
control.
● In an indoor scenario, you are advised to power on a battery within seven
days after unpacking. If the battery cannot be powered on in time, put it in
the original packing case and place it in a dry indoor environment without
corrosive gas.
● Do not use a damaged battery (such as damage caused when a battery is
dropped, bumped, bulged, or dented on the enclosure), because the damage
may cause electrolyte leakage or ammable gas release. In the case of
electrolyte leakage or structural deformation, contact the installer or
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 9

professional O&M personnel immediately to remove or replace the battery.
Do not store the damaged battery near other devices or ammable materials
and keep it away from non-professionals.
● Before working on a battery, ensure that there is no irritating or burning smell
around the battery.
● When installing batteries, do not place installation tools, metal parts, or
sundries on the batteries. After the installation is complete, clean up the
objects on the batteries and the surrounding area.
● To safeguard against water intrusion and subsequent battery carbonization,
ensure that the bottom of a battery remains more than 10 cm above ground
level.
● If a battery is accidentally exposed to water, do not install it. Move it to a safe
place for isolation and contact technical engineers in a timely manner.
● Check whether the positive and negative battery terminals are grounded
unexpectedly. If so, disconnect the battery terminals from the ground.
● Do not perform welding or grinding work around batteries to prevent re
caused by electric sparks or arcs.
● If batteries will not be used for a long period of time, store and charge them
according to the battery requirements.
● Do not charge or discharge batteries by using a device that does not comply
with local laws and regulations.
● Keep the battery loop disconnected during installation and maintenance.
● Monitor damaged batteries during storage for signs of smoke, ame,
electrolyte leakage, or heat.
● If a battery is faulty, its surface temperature may be high. Do not touch the
battery to avoid scalds.
Short-Circuit Protection
● When installing and maintaining batteries, wrap the exposed cable terminals
on the batteries with insulation tape.
● Avoid foreign objects (such as conductive objects, screws, and liquids) from
entering a battery, as this may cause short circuits.
Leakage Handling
NO TICE
Electrolyte overow may damage the equipment. It will corrode metal parts and
boards, and ultimately damage the boards.
Electrolyte is corrosive and can cause irritation and chemical burns. If you come
into direct contact with the battery electrolyte, do as follows:
● Inhalation: Evacuate from contaminated areas, get fresh air immediately, and
seek immediate medical attention.
● Eye contact: Immediately wash your eyes with water for at least 15 minutes,
do not rub your eyes, and seek immediate medical attention.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 10

● Skin contact: Wash the aected areas immediately with soap and water and
seek immediate medical attention.
● Intake: Seek immediate medical attention.
Special requirements for lead-acid batteries:
NO TICE
When the battery temperature exceeds 60°C, check whether the electrolyte leaks.
If the electrolyte leaks, take proper measures promptly.
NO TICE
If the electrolyte leaks, follow the instructions of the battery manufacturer or use
sodium bicarbonate (NaHCO3) or sodium carbonate (Na2CO3) to neutralize the
electrolyte.
Recycling
● Dispose of waste batteries in accordance with local laws and regulations. Do
not dispose of batteries as household waste. Improper disposal of batteries
may result in environmental pollution or an explosion.
● If a battery leaks or is damaged, contact technical support or a battery
recycling company for disposal.
● If batteries are out of service life, contact a battery recycling company for
disposal.
● Do not expose waste batteries to high temperatures or direct sunlight.
● Do not place waste batteries in environments with high humidity or corrosive
substances.
● Do not use faulty batteries. Contact a battery recycling company to scrap
them as soon as possible to avoid environmental pollution.
1.3 Electrical Safety
D ANGER
Before connecting cables, ensure that the equipment is intact. Otherwise, electric
shocks or res may occur.
D ANGER
Non-standard and improper operations may result in re or electric shocks.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 11

D ANGER
Prevent foreign matter from entering the equipment during operations. Otherwise,
equipment damage, load power derating, power failure, or personal injury may
occur.
WARNING
For the equipment that needs to be grounded, install the ground cable rst when
installing the equipment and remove the ground cable last when removing the
equipment.
CA UTION
Do not route cables near the air intake or exhaust vents of the equipment.
CA UTION
Do not directly connect aluminum cables to prevent electrochemical corrosion of
copper and aluminum.
CA UTION
Stay away from the equipment when preparing cables to prevent cable scraps
from entering the equipment. Cable scraps may cause sparks and result in
personal injury and equipment damage.
General Requirements
● Follow the procedures described in the document for installation, operation,
and maintenance. Do not reconstruct or alter the equipment, add
components, or change the installation sequence without permission.
● Install temporary fences or warning ropes and hang "No Entry" signs around
the operation area to keep unauthorized personnel away from the area.
● Before installing or removing power cables, turn o the switches of the
equipment and its upstream and downstream switches.
● If any liquid is detected inside the equipment, disconnect the power supply
immediately and do not use the equipment.
● Before performing operations on the equipment, check that all tools meet the
requirements and record the tools. After the operations are complete, collect
all of the tools to prevent them from being left inside the equipment.
● Before installing power cables, check that cable labels are correct and cable
terminals are insulated.
UPS5000-E-180 kVA
User Manual (Integrated UPS, 30 kVA Power
Modules) 1 Safety Information
Issue 05 (2024-01-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 12