YOUR KEYS
Each Huck comes with two keys...these are the only set for your
bike. if you lose them the entire key system must be replaced.
Do not lose them :)
POWERING YOUR HUCK
Insert the key into the key slot on the ignition switch attached to
the display mount. Turn to the right and the system will power
on. Turn left and...you guessed it, the bike turns off. Remove
keys after every ride.
Keys and Alarm
Press the lock icon to lock or set the alarm
Press the unlock icon to unlock or disable the alarm
ALARM (OPTIONAL)
The optional alarm (alarms are only installed if you added them as
an upgrade) works only when the battery is plugged into the bike
and charged. Your key does not need to be on.
With your alarm set, the bike throttle will not work. Should the bike
be moved with the alarm on, a loud siren will blast until the unlock
button is pressed. The throttle and controller are rendered locked if
the alarm is set and the bike is tampered with.
While the alarm is meant to be a deterrent to theft, it will not
prevent it. so we also suggest a chain lock or if possible, locking
your bike inside.
- Remote start on the alarm has been disabled for safety reasons.
USING THE ALARM
1.
2.
OWNERS MANUAL | 2023. | 09
02
01
