Humminbird Helix Series User manual

INSTALLATION DIAGRAMS
Console & Bow Mount Humminbird Units
The following schematic outlines the necessary
accessories/cables needed to connect two
Humminbird units. Installation is shown with a GPS/
heading sensor and additional High Speed Transducer.
Compatible Accessories
HELIX Series SOLIX Series
1Ethernet Adapter Cable (need 2) Ethernet Adapter Cable
720074-1 AS EC QDE NA
2Ethernet Cable (need 1) Ethernet Cable (need 1)
720073-6
720073-2
720073-5
720073-3
720073-4
AS EC 5E (5’)
AS EC 10E (10’)
AS EC 15E (15’)
AS EC 20E (20’)
AS EC 30E (30’)
720073-6
720073-2
720073-5
720073-3
720073-4
AS EC 5E (5’)
AS EC 10E (10’)
AS EC 15E (15’)
AS EC 20E (20’)
AS EC 30E (30’)
3GPS + Heading Sensor GPS + Heading Sensor
408400-1 AS GPS HS 408400-1 AS GPS HS
720080-1 AS GPS NMEA
4Transducer Splitter Cable Transducer Splitter Cable
720101-1 9 M SIDB Y 720103-1 14 M SIDB Y
5High Speed Transducer (fiberglass hull) High Speed Transducer (fiberglass hull)
710276-1 XP 9 HW T 710287-1 XP 14 HW T
High Speed Transducer (aluminum hull) High Speed Transducer (aluminum hull)
710274-1 XNT 9 HW T 710285-1 XNT 14 HW T
BOW UNIT
CONSOLE UNIT
Networking
Graph
Networking
Graph
Cranking
Battery
1
1
2
3
The accessories and part numbers listed above are valid as of July 2019. Installations shown
are for networking HELIX®Series or SOLIX®Series models.
4
5
Transducer supplied with
MEGA Side Imaging unit at
console
NMEA 0183 Ethernet 12V DC Power Transducer Cable

BOW UNIT
CONSOLE UNIT
Networking
Graph
Networking
Graph
INSTALLATION DIAGRAMS
Minn Kota Trolling Motor with i-Pilot Link Built in
MEGA Down Imaging and
(1) bow-mounted Humminbird unit and
(1) console-mounted Humminbird unit
Compatible Accessories
HELIX Series SOLIX Series
1Ethernet Adapter Cable (need 2) Ethernet Adapter Cable
720074-1 AS EC QDE NA
2Ethernet Cable (need 2) Ethernet Cable (need 2)
720073-6
720073-2
720073-5
720073-3
720073-4
AS EC 5E (5’)
AS EC 10E (10’)
AS EC 15E (15’)
AS EC 20E (20’)
AS EC 30E (30’)
720073-6
720073-2
720073-5
720073-3
720073-4
AS EC 5E (5’)
AS EC 10E (10’)
AS EC 15E (15’)
AS EC 20E (20’)
AS EC 30E (30’)
3GPS + Heading Sensor GPS + Heading Sensor
408400-1 AS GPS HS 408400-1 AS GPS HS
720080-1 AS GPS NMEA
4
Minn Kota® Trolling Motor with
i-Pilot® Link™ and Built In Mega Down
Imaging *
Minn Kota® Trolling Motor with
i-Pilot® Link™ and Built In Mega Down
Imaging *
55-Port Ethernet Switch 5-Port Ethernet Switch
408450-1 AS ETH 5PXG 408450-1 AS ETH 5PXG
6Transducer Splitter Cable Transducer Splitter Cable
720101-1 9 M SIDB Y 720103-1 14 M SIDB Y
7High Speed Transducer (fiberglass hull) High Speed Transducer (fiberglass hull)
710276-1 XP 9 HW T 710287-1 XP 14 HW T
High Speed Transducer (aluminum hull) High Speed Transducer (aluminum hull)
710274-1 XNT 9 HW T 710285-1 XNT 14 HW T
8Adapter Cable for Built In Mega Down
Imaging
Adapter Cable for Built In Mega Down
Imaging
1852085
MKR-MDI-1 HB
HELIX 8 - 12 G2N
/G3N
NA
1852086
MKR-MDI-2 HB
HELIX 7 G2N /
G3N
NA
Cranking
Battery
Trolling
Motor
Batteries
1
1
2
2
4
5
3
* One (1) AS EC 30E 30’ ethernet cable included with trolling motor
The accessories and part numbers listed above are valid as of July 2019. Installations shown
are for networking HELIX Series or SOLIX Series models, and Minn Kota trolling motors
with i-Pilot Link.
8
Transducer supplied with
MEGA Side Imaging unit at
console
6
7
NMEA 0183 Ethernet 12V DC Power Transducer Cable Bluetooth® Signal
MK Heading
Sensor

INSTALLATION DIAGRAMS
Minn Kota Trolling Motor with i-Pilot Link and
(1) console-mounted Humminbird unit
The following schematic outlines the necessary
accessories/cables needed to connect one
Humminbird unit to an i-Pilot Link Minn Kota trolling
motor. Installation is shown with a GPS/heading
sensor and additional High Speed Transducer.
Compatible Accessories
HELIX Series SOLIX Series
1Ethernet Adapter Cable Ethernet Adapter Cable
720074-1 AS EC QDE NA
2GPS + Heading Sensor GPS + Heading Sensor
408400-1 AS GPS HS 408400-1 AS GPS HS
720080-1 AS GPS NMEA
3Minn Kota® Trolling Motor with
i-Pilot® Link™ *
Minn Kota® Trolling Motor with
i-Pilot® Link™ *
4Transducer Splitter Cable Transducer Splitter Cable
720101-1 9 M SIDB Y 720103-1 14 M SIDB Y
5High Speed Transducer (fiberglass hull) High Speed Transducer (fiberglass hull)
710276-1 XP 9 HW T 710287-1 XP 14 HW T
High Speed Transducer (aluminum hull) High Speed Transducer (aluminum hull)
710274-1 XNT 9 HW T 710285-1 XNT 14 HW T
CONSOLE UNIT
Graph
Cranking
Battery
Trolling
Motor
Batteries
1
3
2
* One (1) AS EC 30E 30’ ethernet cable included with trolling motor
The accessories and part numbers listed above are valid as of July 2019. Installations shown
are for networking HELIX Series or SOLIX Series models, and Minn Kota trolling motors
with i-Pilot Link.
4
5
Transducer supplied with
MEGA Side Imaging unit at
console
NMEA 0183 Ethernet 12V DC Power Transducer Cable Bluetooth® Signal
MK
Heading
Sensor

CONSOLE UNITS
BOW UNIT
Networking
Graph
Networking
Graph
Networking
Graph
INSTALLATION DIAGRAMS
Minn Kota Trolling Motor with i-Pilot Link Built in
MEGA Down Imaging and
(1) bow-mounted Humminbird unit and
(2) console-mounted Humminbird units and
Talon Shallow Water Anchor
Compatible Accessories
HELIX G3N Series SOLIX Series
1Ethernet Adapter Cable (need 3) Ethernet Adapter Cable
720074-1 AS EC QDE NA
2Ethernet Cable (need 3) Ethernet Cable (need 3)
720073-6
720073-2
720073-5
720073-3
720073-4
AS EC 5E (5’)
AS EC 10E (10’)
AS EC 15E (15’)
AS EC 20E (20’)
AS EC 30E (30’)
720073-6
720073-2
720073-5
720073-3
720073-4
AS EC 5E (5’)
AS EC 10E (10’)
AS EC 15E (15’)
AS EC 20E (20’)
AS EC 30E
(30’)
3GPS + Heading Sensor GPS + Heading Sensor
408400-1 AS GPS HS 408400-1 AS GPS HS
720080-1 AS GPS NMEA
4
Minn Kota® Trolling Motor with
i-Pilot® Link™ and Built In Mega Down
Imaging *
Minn Kota® Trolling Motor with
i-Pilot® Link™ and Built In Mega Down
Imaging *
55-Port Ethernet Switch 5-Port Ethernet Switch
408450-1 AS ETH 5PXG 408450-1 AS ETH 5PXG
6Transducer Splitter Cable Transducer Splitter Cable
720101-1 9 M SIDB Y 720103-1 14 M SIDB Y
7High Speed Transducer (fiberglass hull) High Speed Transducer (fiberglass hull)
710276-1 XP 9 HW T 710287-1 XP 14 HW T
High Speed Transducer (aluminum hull) High Speed Transducer (aluminum hull)
710274-1 XNT 9 HW T 710285-1 XNT 14 HW T
8Talon Shallow Water Anchor Talon Shallow Water Anchor
12’ Talon SWA 12’ Talon SWA
9Adapter Cable for Built In Mega Down
Imaging
Adapter Cable for Built In Mega Down
Imaging
1852085
MKR-MDI-1 HB
HELIX 8 - 12 G2N/
G3N
NA
1852086
MKR-MDI-2 HB
HELIX 7 G2N /
G3N
NA
Cranking
Battery
Trolling
Motor
Batteries
1
1 1
2
2
2
6
7
4
5
3
* One (1) AS EC 30E 30’ ethernet cable included with trolling motor
The accessories and part numbers listed above are valid as of July 2019. Installations shown
are for networking HELIX Series or SOLIX Series models, and Minn Kota trolling motors
with i-Pilot Link.
Transducer supplied with
MEGA Side Imaging unit at
console
8
9
NMEA 0183 Ethernet 12V DC Power Transducer Cable Bluetooth® Signal
MK
Heading
Sensor

CONSOLE UNIT
Networking
MFD
INSTALLATION DIAGRAMS
Saltwater - Minn Kota Riptide Trolling Motor with
i-Pilot Link and
(1) Console Mount Humminbird Unit
The following schematic outlines the necessary
accessories/cables needed to connect one
Humminbird unit and a Minn Kota trolling motor.
Installation is shown with an optional
GPS/heading sensor.
Compatible Accessories
HELIX Series SOLIX Series
1Ethernet Adapter Cable Ethernet Adapter Cable
720074-1 AS EC QDE NA
2GPS + Heading Sensor GPS + Heading Sensor
408400-1 AS GPS HS 408400-1 AS GPS HS
720080-1 AS GPS NMEA
3Minn Kota® Trolling Motor with
i-Pilot® Link™ *
Minn Kota® Trolling Motor with
i-Pilot® Link™ *
4Transducer Splitter Cable Transducer Splitter Cable
720101-1 9 M SIDB Y 720103-1 14 M SIDB Y
5High Speed Transducer (fiberglass hull) High Speed Transducer (fiberglass hull)
710276-1 XP 9 HW T 710287-1 XP 14 HW T
6High Speed Transducer (aluminum hull) High Speed Transducer (aluminum hull)
710274-1 XNT 9 HW T 710285-1 XNT 14 HW T
3
1
2
* One (1) AS EC 30E 30’ ethernet cable included with trolling motor
The accessories and part numbers listed above are valid as of July 2019. Installations shown
are for networking HELIX®Series or SOLIX®Series models, and Minn Kota®trolling motors with
i-Pilot®Link™.
Cranking
Battery
Transducer
supplied with
MEGA Side
Imaging unit at
console
Trolling
Motor
Battery
NMEA 0183 Ethernet 12V DC Power Transducer Cable Bluetooth® Signal
MK
Heading
Sensor
4
5

Compatible Accessories
HELIX Series SOLIX Series
1Ethernet Adapter Cable (need 2) Ethernet Adapter Cable
720074-1 AS EC QDE NA
2Ethernet Cable (need 2) Ethernet Cable (need 2)
720073-6
720073-2
720073-5
720073-3
720073-4
760025-1
AS EC 5E - 5’
AS EC 10E - 10’
AS EC 15E - 15’
AS EC 20E - 20’
AS EC 30E - 30’
AS ECX 30E -30’
720073-6
720073-2
720073-5
720073-3
720073-4
760025-1
AS EC 5E - 5’
AS EC 10E - 10’
AS EC 15E - 15’
AS EC 20E - 20’
AS EC 30E - 30’
AS ECX 30E -30’
3GPS + Heading Sensor GPS + Heading Sensor
408400-1 AS GPS HS 408400-1 AS GPS HS
720080-1 AS GPS NMEA
4Minn Kota® Trolling Motor with
i-Pilot® Link™ *
Minn Kota® Trolling Motor with
i-Pilot® Link™ *
55-Port Ethernet Switch 5-Port Ethernet Switch
408450-1 AS ETH 5PXG 408450-1 AS ETH 5PXG
6High Speed Transducer (fiberglass hull) High Speed Transducer (fiberglass hull)
710276-1 XP 9 HW T 710287-1 XP 14 HW T
High Speed Transducer (aluminum hull) High Speed Transducer (aluminum hull)
710274-1 XNT 9 HW T 710285-1 XNT 14 HW T
7Transducer Splitter Cable Transducer Splitter Cable
720101-1 9 M SIDB Y 720103-1 14 M SIDB Y
CONSOLE UNITS
Networking
MFD
Networking
MFD 3
4
2
5
11
INSTALLATION DIAGRAMS
Saltwater - Minn Kota Riptide Trolling Motor with
i-Pilot Link and
(2) Console Mount Humminbird Units
The following schematic outlines the necessary
accessories/cables needed to network two
Humminbird units and a Minn Kota Riptide trolling
motor. Installation is shown with a GPS/heading
sensor and High Speed Transducer.
* One (1) AS EC 30E 30’ ethernet cable included with trolling motor.
The accessories and part numbers listed above are valid as of July 2019. Installations shown are for
networking HELIX®Series or SOLIX®Series models, and Minn Kota®trolling motors with i-Pilot®Link™.
Cranking
Battery
Trolling
Motor
Battery
7
6
Transducer supplied with
MEGA Side Imaging unit at
console
NMEA 0183 Ethernet 12V DC Power Transducer Cable Bluetooth® Signal
MK
Heading
Sensor