Hytera H Series User manual

HP702 Intrinsically Safe Digital
Portable Radio
User Manual
Hytera Canada
100 Leek Crescent, Unit 11
Richmond Hill, ON L4B 3E6
[phone]
www.hytera.ca [email protected]
Hytera US Inc.
1363 Shotgun Road,
Sunrise, FL 33326
[phone]
www.hytera.us [email protected]
2022 Hytera. All rights reserved.
8 Whatney,
Irvine, CA 92618

Preface
Welcome to the world of Hytera and thank you for purchasing this product. This manual includes a description of
the functions and step-by-step procedures for use.
To avoid bodily injury or property loss caused by incorrect operation, please carefully read the Safety Information
Booklet before use.
This manual is applicable to the following product:
HP702 UL913 Intrinsically Safe Digital Portable Radio

Copyright Information
Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the Company).
The Company retains the ownership of its trademarks and product names. All other trademarks and/or product
names that may be used in this manual are properties of their respective owners.
The product described in this manual may include the Company's computer programs stored in memory or other
media. The purchase of this product shall not be deemed to grant, either directly or by implication, any rights to the
purchaser regarding the Company's computer programs. The Company's computer programs may not be copied,
modified, distributed, decompiled, or reverse-engineered in any manner without the prior written consent of
the Company.
Disclaimer
The Company endeavors to achieve the accuracy and completeness of this manual, but no warranty of accuracy
or reliability is given. All the specifications and designs are subject to change without notice due to
continuous technological development. No part of this manual may be copied, modified, translated, or distributed in
any manner without the prior written consent of the Company.
We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or completeness of
the third-party products and contents involved in this manual.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. Verification of harmful interference by this
equipment to radio or television reception can be determined by turning it off and then on. The user is encouraged to
try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a different circuit to that of the receiver's outlet.
Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Compliance with RF Exposure Standards
The radio complies with the following RF energy exposure standards and guidelines:
United States Federal Communications Commission, Code of Federal Regulations; 47 CFR § 1.1307, 1.1310 and
2.1093
American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95.
1:2005; Canada RSS102 Issue 5 March 2015
Institute of Electrical and Electronic Engineers (IEEE) C95.1:2005 Edition
RF Exposure Compliance and Control Guidelines and
Operating Instructions
To control your exposure and ensure compliance with the occupational/controlled environmental exposure limits,
always adhere to the following procedures.
Guidelines:
Do not remove the RF Exposure Label from the device.
User awareness instructions should accompany device when transferred to other users.
Do not use this device if the operational requirements described herein are not met.
Operating Instructions:
Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), press the Push-to-Talk (PTT)
key. To receive calls, release the PTT key. Transmitting 50% of the time, or less, is important because the radio
generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).
Keep the radio unit at least 2.5 cm away from the face. Keeping the radio at the proper distance is important as
RF exposure decreases with distance from the antenna. The antenna should be kept away from the face and eyes.
When worn on the body, always place the radio in an approved holder, holster, case, or body harness or by use of
the correct clip for this product. Use of non-approved accessories may result in exposure levels which exceed the
FCC's occupational/controlled environmental RF exposure limits.
Use of non-approved antennas, batteries, and accessories causes the radio to exceed the FCC RF exposure
guidelines.
Contact your local dealer for the product's optional accessories.

ISEDC Statement
The device has been tested and complies with SAR limits, users can obtain Canadian information on RF exposure and
compliance.
Après examen de ce matériel aux conformitéaux limites DAS et/ou aux limites d'intensitéde champ RF, les utilisateurs
peuvent sur l'exposition aux radiofréquences et la conformité and compliance d'acquérir les informations
correspondantes.
This device complies with Innovation, Science and Economic Development Canada Compliance license-exempt RSS
standard(s). Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
RF Radiation Information
This product must be restricted to operations in an occupational/controlled RF exposure environment. Users must be
fully aware of the hazards of the exposure and able to exercise control over their RF exposure to qualify for the higher
exposure limits.
RF Radiation Profile
Radio Frequency (RF) is a frequency of electromagnetic radiation in the range at which radio signals are transmitted.
RF technology is widely used in communication, medicine, food processing and other fields. It may generate radiation
during use.
RF Radiation Safety
In order to ensure user health, experts from relevant industries including science, engineering, medicine and health
work with international organizations to develop standards for safe exposure to RF radiation. These standards consist
of:
●United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2 sub-part J;
● American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992;
● Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999;
● International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998.

FCC Regulations
Federal Communication Commission (FCC) requires that all radio communication products should meet the
requirements set forth in the above standards before they can be marketed in the U.S, and the manufacturer shall post
a RF label on the product to inform users of operational instructions, so as to enhance their occupational health against
exposure to RF energy.
Operational Instructions and Training Guidelines
To ensure optimal performance and compliance with the occupational/controlled environment RF energy exposure
limits in the above standards and guidelines, users should transmit not more than 50% of the time and always adhere
to the following procedures:
● RF energy will be generated only when the radio is transmitting.
● The radio must be 2.5 centimeters away from human body when transmitting.
Hazardous Locations Certification Information
Compliance Standards
UL 913, 5th Ed. February 24, 1997
CAN/CSA C22.2 No. 157-92 (R2016)
ANSI/TIA-4950-A, Rev. May 13, 2014
Equipment marking
I.S Class I, II, III, Division 1, Groups C, D, E, F, G, T4
NI Class I, Division 2, Groups A, B, C, D, T4
–20°C to +60°C
Certificate Number
SGSNA/20/SUW/00085X
No Misoperations
Stop operating this product and leave the explosive atmosphere immediately when the safetyor integrity of the product
is endangered, and deliver it to your local dealer for examination.
These items may endanger the product's safety or integrity:
● The radio is stored improperly;
● The radio is faulty;
● The radio works with overload;
● The radio's operational error or threshold value is out of allowed range;

● The radio is damaged during transportation;
● The radio's housing is obviously damaged or cracked;
● The radio logo or model is hard to be recognized.
Safety Instructions
Caution:To protect you against anyproperty loss, bodily injuryor even death, be sureto observe the following
safety instructions:
● Use only the Ex-battery BL2801-Ex specified bythe Company. The use of other batteries may result in Ex-protection
(intrinsic safety) failure.
● Charge the battery in a non-hazardous area only with the designated charger.
● Do not remove the battery from the radio in a hazardous area.
● Do not carry any standby battery into a hazardous area.
● Use the accessories specified by the Company only. Do not replace the accessories in a hazardous area.
● Do not use a damaged antenna. If a damaged antenna comes into contact with your skin, a minor burn may result.
● Do not expose the radio to direct sunlight for a long time, nor place it close to a heating source.
● Hold the radio upright and keep its microphone 2.5 to 5 centimeters away from your mouth during use.
● If you wear a radio on your body, ensure its antenna is at least 2.5 centimeters away from your body during
transmission.
● Do not attempt to repair and service the radio, batteries and its accessories. Please contact your dealer for repair and
servicing.
● Do not dissemble or redo the radio. Unauthorized modification of the radio may result in termination of Ex-
protection (intrinsic safety) of the radio.
● Improper usage of the product other than it is intended to be used for will impair safety of the product, yourself and
surrounding environment.
Specifications
Item
Specifications
Rated Operating Voltage
DC 7.4 V
Max. Operating Voltage
DC 8.4 V
Dimensions (H x W x D) (with standard battery, without
antenna)
132 mm x 55 mm x 36.5 mm

Weight (with standard antenna & battery)
369 g
Sensitivity
0.18 μV
Rated Audio Power Output
0.5 W
Audio Distortion
≤3%
Ambient Temperature
–20°C to +60°C
Storage Temperature
–40°C to +85°C
Charging Temperature
0°C to 45°C
Battery
Ex-battery BL2801-Ex (2850 mAh)
Charging Time
About 4 hours

Renseignements sur l’homologation des endroits
dangereux
Normes de conformité
UL 913, 5th Ed. February 24, 1997
CAN/CSA C22.2 No. 157-92 (R2016)
ANSI/TIA-4950-A, Rev. May 13, 2014
Marquage de l’équipement
I.S Classe I, II, III, Division 1, Groupe C, D, E, F, G, T4
NI Classe I, Division 2, Groupe A, B, C, D, T4
–20℃ à +60℃
Numéro de certificat
SGSNA/20/SUW/00085X
Mauvaises utilisations àéviter
Arrêtez d’utiliser ce produit et quittez l’atmosphère explosive immédiatement si la sécurité ou l’intégrité du produit
sont compromises, puis retournez-le àvotre revendeur local pour vérification.
Voici la liste des éléments susceptibles de compromettre la sécurité ou l’intégrité du produit:
● La radio n’est pas stockée correctement.
● La radio est défaillante.
● La radio fonctionne en surcharge.
● La valeur de seuil ou d’erreur de fonctionnement de la radio se trouve en dehors de la plage autorisée.
● La radio est endommagée au cours du transport.
● Le boîtier de la radio est visiblement endommagéou fendillé.
● Le logo ou le modèle de la radio sont difficilement reconnaissables.
Instructions de sécurité
Avertissement: Pour vous protéger contre la perte de biens, les blessures corporelles ou même les risques
mortels, assurez-vous de suivre les instructions de sécuritésuivantes:
● N’utilisez que la batterie Ex BL2801-Ex spécifiée par l’Entreprise. L’utilisation d’autres batteries peut entraîner
une défaillance de la protection Ex (sûretéintrinsèque).
● Chargez uniquement la batterie dans une zone ne présentant aucun risque, àl’aide du chargeur prévu àcet effet.
● Ne retirez pas la batterie de la radio dans une zone àrisques.

● Ne transportez pas de batterie de rechange dans une zone àrisques.
● Utilisez uniquement les accessoires specifies par l’Entreprise. Ne remplacez pas les accessoires dans une zone à
risques.
● N’utilisez pas une antenne endommagée. Si une antenne endommagée entre en contact avec votre peau, vous risquez
des brûlures superficielles.
● N’exposez pas la radio àla lumière directe du soleil pendant une période prolongée. Ne la placez pas àproximité
d’une source de chaleur.
● Tenez la radio en position vertical et gardez le micro àune distance de 2,5 à5 cm de votre bouche pendant son
utilisation.
● Si vous transportez une radio, assurez-vous que son antenne se trouve àune distance minimale de 2,5 cm de votre
corps au cours de la transmission.
● N’essayez pas de réparer et d’entretenir la radio, les batteries et les accessoires. Veuillez contacter votre revendeur
pour la reparation et l’entretien.
● Ne démontez pas la radio, ne la modifies pas. Toute modification non autorisée de la radio peut compromettre la
protection Ex (sûretéintrinsèque) de la radio.
● Une utilization incorrecte du produit, autre que dans le cadre de l’utilization prévue, peut compromettre la sécurité
du produit, votre sécuritéet celle de votre environnement.
● Ne transportez pas la radio dans des zones 0 et 20. Veuillez ne pas utiliser la radio en dehors des plages de
temperature de fonctionnement spécifiées pour ce produit.
Spécifications
Élément
Spécifications
Tension nominale de fonctionnement
DC 7.4 V
Tension maximum de fonctionnement
DC 8.4 V
Dimensions (H ×L ×P) (avec batterie standard, sans
antenne)
132 mm x 55 mm x 36.5 mm
Poids (avec antenne et batterie standards)
369 g
Sensibilité
0.18 μV
Puissance nominale de sortie audio
0.5 W

Distorsion audio
≤3%
Température ambiante
–20°C à +60°C
Température de stockage
–40°C à +85°C
Température de charge
0°C à45°C
Batterie
Ex-battery BL2801-Ex (2850 mAh)
Durée de chargement
Environ 4 heures

User Manual
Contents
i
Contents
Documentation Information........................................................................................................................ 1
1. Packing List..............................................................................................................................................2
2. Product Overview..................................................................................................................................... 3
2.1 Product Layout .....................................................................................................................................3
2.2 Programmable Keys.............................................................................................................................4
3. Before Use ................................................................................................................................................5
3.1 Charging the Battery ............................................................................................................................5
3.2 Installing the TF Card...........................................................................................................................5
3.3 Attaching the Belt Clip..........................................................................................................................6
3.4 Attaching the Battery............................................................................................................................6
3.5 Attaching the Antenna..........................................................................................................................7
3.6 Attaching the Audio Accessory ............................................................................................................7
4. Basic Operations.................................................................................................................................... 10
4.1 Turning the Radio On or Off...............................................................................................................10
4.2 Adjusting the Volume ......................................................................................................................... 10
4.3 Switching the Operation Mode...........................................................................................................10
4.3.1 Conventional Mode .................................................................................................................. 10
4.3.2 Trunking Mode ......................................................................................................................... 11
5. Status Indications ..................................................................................................................................12
5.1 OLED Icons........................................................................................................................................12
5.1.1 Basic Status .............................................................................................................................12
5.1.2 Operation Mode .......................................................................................................................12
5.2 LED Indications ..................................................................................................................................13
6. Call Services...........................................................................................................................................14
6.1 Call on Digital Channel.......................................................................................................................14
6.1.1 Initiating a Call..........................................................................................................................14
6.1.2 Receiving a Call .......................................................................................................................15
6.1.3 Ending a Call............................................................................................................................15
6.2 Call on Analog Channel......................................................................................................................15
6.2.1 Call Without Signaling..............................................................................................................16
6.2.2 Call with Signaling....................................................................................................................16
7. Supplementary Features....................................................................................................................... 17
7.1 Profiles................................................................................................................................................17
7.2 Audio Settings ....................................................................................................................................17
7.2.1 Mode Switch.............................................................................................................................17
7.2.2 Noise Cancellation ...................................................................................................................18
7.3 Power Level........................................................................................................................................18

Contents
User Manual
ii
7.4 Scan.................................................................................................................................................... 18
7.4.1 Conventional Mode .................................................................................................................. 18
7.4.2 Trunking Mode .........................................................................................................................18
7.5 Positioning..........................................................................................................................................20
7.5.1 Voice w/Location ......................................................................................................................20
7.5.2 GPS Report..............................................................................................................................20
7.6 BT.......................................................................................................................................................21
7.6.1 Enabling the BT Feature ..........................................................................................................21
7.6.2 Connecting a BT Device ..........................................................................................................21
7.6.3 Switching the BT Audio Output ................................................................................................21
7.7 One Touch Call................................................................................................................................... 21
7.8 Roam (Conventional Only).................................................................................................................22
7.9 Talk Around........................................................................................................................................22
7.10 Squelch Level...................................................................................................................................22
7.11 DGNA ...............................................................................................................................................23
7.12 Priority Interrupt................................................................................................................................23
7.12.1 Manual Priority Interrupt.........................................................................................................23
7.12.2 Auto Priority Interrupt .............................................................................................................23
7.13 Emergency .......................................................................................................................................23
7.13.1 Initiating an Emergency Call .................................................................................................. 24
7.13.2 Receiving an Emergency Call................................................................................................24
7.13.3 Ending an Emergency Call ....................................................................................................24
7.14 Man Down ........................................................................................................................................25
7.15 Lone Worker.....................................................................................................................................25
7.16 Encrypt..............................................................................................................................................25
7.17 Stun, Revive, and Kill.......................................................................................................................26
7.18 Emergency Erase Data....................................................................................................................26
8. Troubleshooting..................................................................................................................................... 27
9. Product Care........................................................................................................................................... 30
9.1 Radio .................................................................................................................................................. 30
9.2 Battery ................................................................................................................................................30
9.3 Cleaning..............................................................................................................................................31
9.4 Sterilizing............................................................................................................................................32
9.5 Storing ................................................................................................................................................32
10. Optional Accessories ..........................................................................................................................33
11. Abbreviations ....................................................................................................................................... 34

User Manual
Documentation Information
1
Documentation Information
This section describes the audience, conventions and revision history of this guide.
Icon Conventions
Icon
Description
Indicates references that can further describe the related topics.
Indicates situations that could cause data loss or equipment damage.
Indicates situations that could cause major personal injury or even death.
Notation Conventions
Item
Description
Example
Boldface
Denotes menus, tabs, parameter names,
window names, dialogue names, and
hardware buttons.
To save the configuration, click Apply.
The Log Level Settings dialogue box appears.
Press the PTT key.
" "
Denotes messages, directories, file names,
folder names, and parameter values.
The screen displays "Invalid Battery!".
Open "PSS.exe".
Go to "D:/opt/local".
In the Port text box, enter "22".
>
Directs you to access a multi-level menu.
Go to File > New.
Italic
Denotes document titles.
For details about using the DWS, refer to
Dispatch Workstation User Guide.
Courier New
Denotes commands and their execution
results.
To set the IP address, run the following
command:
vos-cmd - m name IP

Packing List
User Manual
2
1. Packing List
Please unpack carefully and check that you have received the following items. If any item is missing or damaged,
contact your dealer.
Item
Quantity (PCS)
Item
Quantity (PCS)
Radio
1
Antenna
1
Battery
1
Belt Clip
1
Charger
1
Strap
1
Power Adapter
1
Documentation Kit
1
Figures in this manual are only for reference.
Check whether the frequency band marked on the antenna label matches that on the radio label. If not, contact
your dealer.

User Manual
Product Overview
3
2. Product Overview
2.1 Product Layout
NO.
Part Name
NO.
Part Name
1
On-Off Key
10
Antenna
2
Push-to-Talk (PTT) Key
11
Microphone
3
Side Key 1 (SK1)
12
Battery Latch
4
Side Key 1 (SK2)
13
Strap Hole
5
Top Key (TK)
14
Accessory Connector
6
Smart Knob
15
Belt Clip

Product Overview
User Manual
4
NO.
Part Name
NO.
Part Name
7
OLED Display
16
Battery
8
Speaker
17
Charging Contacts
9
LED Indicator
/
/
2.2 Programmable Keys
For enhanced convenience, you can request your dealer to program TK, SK1, and SK2 as shortcuts to radio features.
For details, consult your dealer.

User Manual
Before Use
5
3. Before Use
3.1 Charging the Battery
Use the approved charger to charge the battery.
Read the Safety Information Booklet before charging.
The remaining lithium-ion battery power is limited to 30% pursuant to the new lithium battery shipment
regulation approved by the International Air Transport Association (IATA).
Before initial use, charge either the battery alone or the battery that is attached to the radio. It is recommended that the
radio remain powered off during charging.
The LED indicator on the charger shows the charging status, as described in the following table.
LED Indicator
Charging Status
Glows red
The battery is being charged.
Glows orange
The battery is charged to 90% or above.
Glows green
The battery is fully charged.
Flashes red slowly
No battery is placed on the charger.
Flashes red rapidly
The battery fails to be charged.
3.2 Installing the TF Card
If you purchase a TF card, install it as follows:
Use a screwdriver to loosen the screw on the card slot cover, and then remove the card slot cover.
Install the TF card, put the card slot cover back in place, and then tighten the screw.

Before Use
User Manual
6
3.3 Attaching the Belt Clip
Align the holder on the belt clip with the groove on the battery, and then press the belt clip downwards into place.
You can press and hold the spring plate of the belt clip, and then push the belt clip upwards to remove it.
3.4 Attaching the Battery
Use the approved battery to avoid the risk of explosion.
Dispose of the used battery according to "Precautions for Disposal" in the Safety Information Booklet.

User Manual
Before Use
7
To remove the battery, make sure that the radio is turned off, and then lift the battery latch.
3.5 Attaching the Antenna
Do not hold the radio by the antenna and swing it. This may affect the antenna performance and shorten the life
span of the antenna.
3.6 Attaching the Audio Accessory
For optimal waterproof and dustproof performance, do as follows:
Attach the accessory with care to avoid scraping the silicone rubber surrounding the accessory connector
screw hole.
Close the accessory connector cover and fasten the screw after removing the accessory.