ICP DAS USA DS-2200 Series User manual

Technical support: servic[email protected] P1
DS-2200 Series Quick Start
V1.0, Jul. 2020
What’s in the box?
Related Information
The package includes the following items:
DS-2200 Series Module x 1
Quick Start x1 (This Document)
DS Series Product Page:
http://www.icpdas.com/en/product/guide+Industrial__Communication+Serial
__Communication+Serial-to-Ethernet__Device__Server#1189
Documentation & Firmware:
http://www.icpdas.com/en/download/index.php?model=DS-2215i
NS-205/NS-205PSE Product Page (optional):
https://www.icpdas.com/en/product/guide+Industrial__Communicat
ion+Ethernet__Communication+Ethernet__Switch#792

Technical support: servic[email protected] P2
1 Connecting the Power and Host PC
1) Make sure your PC has workable network settings.
Disable or well configure your Windows firewall andAnti-Virus firewall first,
else the “Search Servers” on Chapter 4 may not work. (Please contact
with your system Administrator)
2) Connect both the DS-2200 and your PC to the same sub network or the
same Ethernet switch.
3) Supply power (PoE or +12~+48 VDC)to the DS-2000.
Note : Please use the first RJ-45 jack (ETH1) to connect the PoE Switch
when using the PoE to power.The second RJ-45 jack (ETH2)
doesn’t support the PoE function

Technical support: servic[email protected] P3
2 Self-Test Wiring
Wiring Notes for RS-232/485/422 Interfaces:
: Here, the RS-232 and RS-485 wiring is used as an example.
RS-232 Wiring
RS-422 Wiring
RS-485 Wiring
While using RS-485 modules, you can not wire the Data+ with Data- signals for self-test. But you
can test two RS-485 ports by wiring the Data1+ with Data2+ signals, and wiring the Data1- with
Data2- signals. Then send data to one and receive data from another.
RxD
TxD
TxD
RxD
GND
GND
RTS
CTS
CTS
RTS
TxD+
RxD+
TxD-
RxD-
RxD+
TxD+
RxD-
TxD-
GND
GND
Data+
Data+
Data-
Data-
GND
GND

Technical support: servic[email protected] P4
3 Installing Software on Your PC
Install VxComm Utility, which can be obtained
from the web site:
https://www.icpdas.com/en/download/index.php?nation=US&kind1=&model=&kw=
vxcomm
4 Configuring Network Settings
1) Double-click the VxComm Utility shortcut on the desktop.
2) Click the “Search Servers”to search your DS-2200.
3) Double-click the name of DS-2200 to open the “Configure Server (UDP)”
dialog box.
Factory Default Settings of DS-2200:
IP Address
192.168.255.1
Subnet Mask
255.255.0.0
Gateway
192.168.0.1




Technical support: servic[email protected] P5
4) Contact your Network Administrator to obtain a correct network
configuration (such as IP/Mask/Gateway). Enter the network settings
and click “OK”. Note: The DS-2200 will use the new settings 2
seconds later.
5 Configuring Virtual COM Ports
1) Wait 2 seconds and click “Search Servers”button again to ensure the
DS-2200 is working well with new configuration.
2) Click the name of DS-2200 to select it.




Technical support: servic[email protected] P6
3) Click the “Add Server[S]”button.
4) Assign a COM Port number and click “OK”to save your settings.
5) Click on DS-2200 name and check the virtual COM Port mappings on the
PC.




Technical support: servic[email protected] P7
6) Click the “Restart Driver”item in the “Tools”menu to display the
“VxComm Utility: Restarting Driver”dialog box.
7) Click the “Restart Driver”button.
6 Self-Test
1) Right click Port1 and then choose the “Open COM Port”item.
2) Check that the configuration of the COM Port is correct and then click the
“Open COM”button.





Technical support: servic[email protected] P8
3)Type a string in the “Send” field.
4)Click the “Hex/Text”option in the “Display”section.
5)Click the “Send” button to send the message.
6)If a response is received, it will be displayed in the received field.



